Tap to unmute

Polaris 400 Shifter Repair

  Рет қаралды 14,268

Mr. Fixit

Mr. Fixit

Күн бұрын

Пікірлер
@thomasimmesberger2644
@thomasimmesberger2644 2 жыл бұрын
Love the video buddy. Love how it’s non-edited . Love to see it’s not only me with things flying all over and losing parts to what I call The Land Of Make-believe.
@MrFixit1
@MrFixit1 2 жыл бұрын
Just keeping it real. Thanks for watching.
@robertwood7858
@robertwood7858 4 ай бұрын
Thank you for the video I had to use your method of disassembly, my ole Polaris shifter stuck and was a mess. lots of rust and water. after watching your video i was able to correct my shifter thanks
@berad187
@berad187 9 ай бұрын
I had gone through the same problem with my 94 Polaris like yours I found out it was all rusty inside the shifter box I had to clean it out and added gear oil in it and did what I can Make sure all the springs and ball bearings was all moving
@louiscormier12
@louiscormier12 Жыл бұрын
Service manual calls for 0W-40 to cover half of the pins - not stuffing all that grease in it.
@MrFixit1
@MrFixit1 Жыл бұрын
Make sure you replace the o-rings on the actuator shafts or it will leak out.
@Kingsoupturbo
@Kingsoupturbo 11 ай бұрын
@@MrFixit1 I did my O-rings and filled it to spec with oil and it still leaks, it might be getting grease down the line as well.
@chrisC5339
@chrisC5339 Жыл бұрын
Good job, not looking forward to taking mine apart, doesn't shift until exhaust, beside the shifter, warms it up in colder weather, Ontario, Canada
@MrFixit1
@MrFixit1 Жыл бұрын
Too cold for me Friend! Haha
@MrAlternation
@MrAlternation 2 ай бұрын
4:30 how far did you need to drill? i already made a good little hole. but when i use my punch to punch out the little thing, its not working.
@MrFixit1
@MrFixit1 2 ай бұрын
I'd say it was 3/16 or a 1/4 inch or so. You will know because you will feel the difference between the aluminum and the hardened steel pin. But this was a few years ago now so my memory is a bit faded. Good luck.
@MrAlternation
@MrAlternation 2 ай бұрын
@@MrFixit1 thanks
@MrAlternation
@MrAlternation 2 ай бұрын
@@MrFixit1 yeah its not coming out man.
@bustersmith5569
@bustersmith5569 3 ай бұрын
Would a 1993 trans be different ?? Looks the very same as yours ,,
@MrFixit1
@MrFixit1 3 ай бұрын
Should be the same Mine is an EZ shift type 3
@brucegreen1016
@brucegreen1016 2 жыл бұрын
hey, nice repair job on the shifter, i was wondering what's in the plastic cup to harden the pins, my shifter is acting up now from plowing snow, i just might need to do a tear down soon
@MrFixit1
@MrFixit1 2 жыл бұрын
Used engine oil. Thanks for watching.
@jandeband
@jandeband Жыл бұрын
Ive got a sloppy shifter, on my recently acquired , 99 sportsman 500, easy fix, rebuild or replace ?
@MrFixit1
@MrFixit1 Жыл бұрын
Not a lot you can do to fix it. Best to replace it. The pin that runs through the ball on the lever may be broken or loose. I would check that.
@garyjohn316
@garyjohn316 2 жыл бұрын
Mr fix it, how in the hell did you get the 2 linkage rods off the shifter?? Thanks!
@MrFixit1
@MrFixit1 2 жыл бұрын
They were held in by a bolt and nut. 7/16 I believe.
@MrAlternation
@MrAlternation Ай бұрын
I had to weld a bot onto mine so i can break the years of rust. posting a video soon .
@johnnybarrett7612
@johnnybarrett7612 2 жыл бұрын
Imagine that. Working on polaris about like owning a harley
@MrFixit1
@MrFixit1 2 жыл бұрын
ha ha Polaris is the Harley of the ATV world for sure.
@lolprice6190
@lolprice6190 Жыл бұрын
Maybe put a grease nipple in the taped hole
@MrFixit1
@MrFixit1 Жыл бұрын
the threaded hole is blocked by the pin.
Fixing Polaris shifter
6:56
PolarisNuts Garage
Рет қаралды 71 М.
Basic Routine Maintenance for the Polaris 400L 4X4
15:09
Mr. Fixit
Рет қаралды 18 М.
My scorpion was taken away from me 😢
00:55
TyphoonFast 5
Рет қаралды 2,7 МЛН
How To Restomod A 1970 Dodge Challenger R/T: No Bolts Left Behind!
49:02
Polaris Sportsman 700 won't shift into high gear repair
6:57
Titaniumman Garage
Рет қаралды 65 М.
Removing and fixing the transmission in a 2017 Polaris General 1000
43:43
Mountain Mindset
Рет қаралды 3,1 М.
Polaris Magnum 425 - Chain Issues / Starter Noise / Transmission Problems - Part 1
8:09
Polaris 4x4 magnetic coil hub fix
5:12
jared howes
Рет қаралды 166 М.
Polaris Override Bypass
10:02
Mr. Fixit
Рет қаралды 20 М.
Fixing The Worst ATVs On Marketplace Polaris Xplorer 400
14:19
Avery Bryant
Рет қаралды 4,2 М.
Chain adjustment on older Polaris Xplorer 300 400
3:31
Kirk Johnson
Рет қаралды 129 М.
Polaris Sportsman Gear Selector Rebuild Part 1
2:46
Laythen Young
Рет қаралды 756