Massey Ferguson 135 6 Speed Restoration # 70 Fitting the Steering Box

[@gabriel-iz6wz]

Thank you for loading all those videos. Greetings from uruguay.

[@BundyBearsShed]

You are welcome!

[@davidsample9130]

Always a boost when things start going back together

[@BundyBearsShed]

Yes you can see results from your work.

[@charleshart6992]

Hi Lance - Excellent! Coming along very nicely

[@BundyBearsShed]

Yes starting to get interesting

[@johnvandenakker3245]

Thankyou Lance

[@BundyBearsShed]

Thanks John.

[@charlesvanderwolf5751]

Hello Lance. Starting to look like a tractor again--- and progressing nicely. Regards Charles Vanderwolf @ Nerimbera.

[@BundyBearsShed]

G Day Charles, Yes it is coming along as time allows, it will be one piece in a few weeks hopefully.

[@JACKATTACKED]

It's coming along nicely Lance 👍

[@BundyBearsShed]

Yeah slowly

[@DavidSTormu-ns3tb]

I'm interesting in the rebuilding of MF 135 & MF 375s .it's amassing.

[@BundyBearsShed]

Thanks.

[@1001Silver]

I have the problem that my front wheels flatter at higher speed. Are there spare parts available for the inside of the steerbox?

[@BundyBearsShed]

Yes almost everything is available but I would replace tie rod ends first and set 8mm of toe in at the front and see it that helps.

[@pm270100]

id say i will have to look in the box and the top bearing is roo ted coz my wheel goes up down good 1/2 inch

[@BundyBearsShed]

We sell the bearings for the column, it is common for them to be buggered.

[@pm270100]

i need to do that on my TEA the arms out of box r arse up out of wack and i can not adjust tow in /////icome up A its 12 here

[@BundyBearsShed]

G Day Bill, If you pull the tie rod ends off you can turn the wheel all one way and line them up again and if in doubt pull the 4 bolts near the column and time it from there.

[@samsstuff3100]

well now i know im not the only one who calls it a shifter

[@BundyBearsShed]

No other word for it, lol.

[@douglasgoldsworthy5019]

i remove my steering box it was gone so I replace it with a power steering box off old mf 35 and I got no idea were all the lines from p steering goes can you help me thanks

[@BundyBearsShed]

Have a look at the 135 workshop manual on my web site it will probably show you.

[@jembo1959]

Thanks still staking your videos Ha Ha, your a busy Man Lance, fair play another great video, can I ask would this be the same procedure if I was doing the steering box, on my TEF 20.

[@BundyBearsShed]

Bolting it on would be but the arms are different as the nut for them is inside the steering box.