Active spoiler, wheelie bar and filters. Quadra V-Tech from Cyberpunk 2077. Part 26

Hi everyone! I continue assembling Quadra V-Tech from Cyberpunk 2077! In this series, I wanna continue working on the back. I'm gonna make the wheelie bar and filters that are located under the muffler. I'll also make an active rear spoiler with variable geometry.

[@matthewschoen9827]

This project is truly incredible and I hope someone from CD project sees this. Everyone should see this. It's a feat of engineering.

[@rettichdergeile9361]

They've commented on earlier parts of this build

[@kruleworld]

the build is amazing. if this was done in the West lawsuits would shut it down.

[@consensus688]

@kruleworld Don't think they would he's not planning to make more sell them or saying it's his design

[@halofreak1990]

@@kruleworldI doubt that, to be honest. I don't see Mike Pondsmith, the creator of the Cyberpunk franchise, as one who would shut down a fan-made creation, as long as "fair use" applies

[@mocmocmoc13]

@@kruleworld It depends.. CDPR and Mike Pondsmith? They will love it!

[@diddy4279]

This is still the coolest thing to come from the Cyberpunk fandom.

[@Nykkynn]

Absolutely!

[@_mylastname]

Without question

[@shaboingboing1]

someone needs to make the tyger claw bike out of an ARCH method 143

[@_mylastname]

@@shaboingboing1 call Keanu Reeves and have his company build one then👍

[@zzzires5045]

My only dissapointment is being just this dude there's a lack of refined skills and more importantly a lack of funds ie not using a rear engine crashed super car

[@scottwatrous]

I love how much detail is being achieved with such scuffed fabrication methods. Absolutely bananas what some ingenuity can accomplish when you can don't have too many engineering constraints or concerns and just need it to look right.

[@jamesbando_original]

Search Bowell cars. Essentially what this guy is doing. Fibreglass diy cars. (Granted I would buy this over a piece of my countries history)

[@I3urton]

@@jamesbando_original The Nagari 300's tail lights make me yearn for a Honda Integra. :(

[@WIN73RMU73]

This is such an amazing build. I grew up around cars and always wanted to customize one like this. This is one of those builds that's so good you almost don't want it to end.

[@UFAnders]

Man, this is just incredible. His ability to craft all of these parts with such a precise look, using low-tech methods (hand-forming metal hangers, using syrofoam cores, etc.) is inspiring. We all should learn these methods before the apocalypse arrives. 😅

[@patton333]

You'd be amazed at what super high tech devices and vehicles use foam cores and hand formed composites in industry.

[@Mitjiva]

​@@patton333 :o

[@mirrorsmirage7534]

cant wait to see the final product. awesome work

[@TheMongolorian]

Car will be ready for when Cyberpunk Orion comes out

[@DanakarEndeel]

Would be so awesome to see CDPR reaching out to you at some point and perhaps see your creation at a convention one day. Would be pretty amazing if CDPR ever announced a sequel to Cyberpunk 2077 and have your Quadra V-Tech on display at their booth. 😃

[@Shadrok]

Considering how no one wants to interact with Russians nowadays it's unlikely that CDPR will reach out

[@YourPalQWERTY]

Sadly this is a functional model, it would be cheaper for them to just make a shell and fixed metal frame and just ship that around.

[@DanakarEndeel]

@@YourPalQWERTY True, but with a functional model it would be much easier to move it around. Instead of having 4 people trying to put together all the pieces of a mockup over the course of a couple hours; you could simply drive this one to the expo hall and be done with it. 🙂 A shell might be cheaper to ship though because of the lower weight but either way you'd likely need a container to transport all the items.

[@Styphoryte]

@@DanakarEndeel I would imagine most expo hall cars are brought in by trailer anyhoo. :P

[@DanakarEndeel]

@@Styphoryte Most likely yeah. All the assets of their booth would also need to arrive and be assembled so delivering them via trailer would be the most effective means. Having a car that can actually be driven would save a lot of time compared to a mockup that needs to be assembled first. But that's just my opinion. I'm simply amazed how this guy with some basic materials is able to create a complete working replica of a Cyberpunk 2077 car in his garage. 🙂

[@nathams42]

It's looking really nice...makes me wish car manufacturers would make cars that look like this instead of the usual round blobs we have today (unless we look into supercars)

[@WavveBoi]

Safety regulation. Crumple zones, pedestrian safety, reinforcement of ABC pillars, etc. Pretty much has dictated the design of cars for the last 20 years at least. Its hard to make cars look good or unique without designing something automotive safety regs would designate as a death box.

[@yourtrunkrattles4398]

This ugly as hell but us white people would love this no kidding

[@shadbud9198]

@@WavveBoi Quadra type 66 seems like it would pass regulations

[@WavveBoi]

@@shadbud9198 indeed it does. The second point is cost. Round blob crossovers(I'm looking directly at you Chevy Trax) have cheap to manufacture platforms and body panels. The more angles and styling the higher production costs are. The quadra type 66 is pretty much a fast back mustang with a very aggressive wide body aero package similar to a gt3 car. Not very cheap. In fact. There is a production gt3 mustang for the 2024 model year. Also. The roundness has a better drag coefficient for fuel efficiency while also maintaining the required structural rigidity for safety regs at the lowest cost within reason. Remember when cars looked terrible from like 2006 to 2010? They were trying to work around all the major changes to safety standards. It took a while to refine the metallurgy and fabrication needed to make cars look okay again. Toyota is a good example of that process. 2004 mustangs looked pretty good. 2005 were mediocre then ok again by 2011. Sorry. I'm a car nerd.

[@mannotter]

​@@WavveBoiinteresting explanation. I learned something. Thanks. Though I wish I could own something like a Quadra at an affordable price. Maybe in some alternate universe 😢

[@cgtactical6619]

I find this channel and build so refreshing, no ever-edited crap and actually shows what he is doing. A lot or creators would make a 30 minute video with maybe 10 minutes of actual content worth watching.

[@dannymartial7997]

Keep it up, man. This is my favorite build on YT, or anywhere. No one else is doing this

[@7Deer7]

Looks nova, choom. Can't wait for the final result. Been scrolling these since part 1. Keep up the good work! :D

[@benoitbergeron8858]

I stumbled upon this video 2 days ago. I was so impressed by the project that I went back and watch all the parts up to that one. It's really nice to see how much progress was made since he first assembled the foam body on a wooden frame

[@RamblinVan]

The amount of work you put in to one cosmetic piece is astounding. Much respect. I probably would've just shaped it from polymer and coated it in resin but you went above and beyond. I'm in awe of your shop and how many different tools you have available. You can do just about anything.

[@thefrokTV]

I Don't even need to watch the whole video to know that I already like it ! ☺

[@jordynwilson8918]

once again, so glad to see this series continuing man, this stuff is so dope, I really love this build. This is a dream come true seeing this come to life

[@arc00ta]

This is the greatest thing I have seen on the internet all year. Been following this build for a while. Absolutely amazing work!

[@an1xpyramid639]

I am excited and satisfied to see the ingenuity you show in solving problems, a treat

[@OneInTheMosh]

Piece by piece you're getting closer to getting this thing screen-accurate than I ever thought you would. Amazing work, keep at it!

[@alittlecreepywhenyou]

Initially I didn't realise what the intention of this project was, but then when the penny eventually dropped, I recognised how amazing this was. Well done.

[@benhaylock]

It's the attention to detail that really sells how much you enjoy the build

[@freeatleast]

These videos are absolutely amazing. This young man truly is an artist and mechanical genius.

[@Autmrane]

I’ve seen this project in my rec feed a few times and passed it up, now imma go and watch the parts I missed. The passion on display here is amazing, I’m excited to see it to the end!

[@matthewlock5833]

Again, absolutely brilliant upload. This just keeps getting better and better

[@caintz7792]

I am so glad someone is making one of these. Absolutely love the look of them!

[@Tavi78]

probably the most nova car build i’ve ever seen. your work is truly impressive choom

[@michelangelo5903]

this is just insane! love watching this build! this man is a master of his craft!

[@TheMrCyberthief]

Legit i caught up on the last four episodes today because id forgotten about the series and then bam. New episode. *Chefs kiss*

[@yourewrong4399]

Been following since the beginning and my god you are an inspiration. Every time a new episode comes out it actually makes me smile; i truly look forward to seeing these updates

[@Polyvalent]

I come back every now and then to check on this build. This rear end is incredible!!

[@danieledui2321]

Great job, amazing work, can't wait to see this quadra finished

[@Corn-Pop.]

got to respect someone who starts a project and sticks to it, and damn is this a big job

[@helbrecht69]

The detail is becoming really unbelievable. Well done!

[@xirofid6022]

this is the best project i ever seen my entire life you made it so far since 3 years congrats ! it's almost done

[@shogunender8752]

By far one of the most unique builds I’ve seen and the Quadra is one of my favorite car designs in fiction. You’ve done a fantastic job with this I hope it’s going well behind the camera.

[@thesavagegummybear7341]

this is actually insane!! honestly in just in awe of your ability, I'm definitely gonna keep an eye on this build, keep it up man!

[@juandeagle1795]

I would love to see this thing driving when 100% done

[@CY3ER]

My god man, this is amazing to see how much dedication and hard work you're putting into this project. The Quadra Turbo-R is one of the coolest cars in the game. It's so cool that you're bringing it into real life.

[@ampedelectric101]

It’s crazy how the two tier spoiler transforms the car! Beautiful work I’m excited to see the next video on this build!

[@monado550]

I cant waiiiiiiit i love your project man, makes me so happy that at least one of us will be able to drive this beauty

[@jenmc14gaming59]

Awesome project. I look forward to all your updates!

[@user-ik5cy2hs1p]

Truly amazing work, it's going to be mind-blowing once you're done.

[@DaDom07]

This guy is a genius. Awesome build!! 👍🏻

[@schnitzel_enjoyer]

I have been closely following this project, can't wait for this to be complete

[@bayronvega5910]

Finally, updated with all process. How fast time passes by watching these videos

[@iceneet336]

i was skeptical at first but damn its really coming together, BRAVO!!

[@adamgardiner5869]

This is basically a masterclass on kitbashing at 1:1 scale. Brilliant

[@AkulaCola]

So many disciplines and trades being used. Craftsmanship. Wow.

[@andreacaruso258]

Simply amazing, as always. Great work 👍🏻👍🏻👍🏻👍🏻

[@zephyro76]

This is really becoming great !! now the back look is almost perfect

[@artfiend4212]

This is unreal. Some fantastic engineering.

[@rcgcris1896]

It's amazing to see everything coming together. Keep it up with the awesome content 🤘

[@justinjones8744]

i love this project too been following from begining it gives me inspiration to get on with my own project and i love your engineering and skills with fibreglass and the electrnics keep it up buddy cant wait too see this completed it will truly be a work of art . Thanks for sharing

[@bustboi5906]

can’t wait til this is finished!! will be truly one of a kind

[@kingtorra6955]

I can’t believe it took me this long to find the progress on this. This is incredible!

[@Mogwai-user]

It's coming along nicely, looking back to when you started, there is so much completed now. congrats.

[@oscar21781]

This is so freaking awesome! I'm going back to watch the rest of the series now

[@arsenygubkin1222]

Got this video recommended and immediately subscribed! Hella impressive job!

[@justinhazze8228]

Been here Since part one. By far my favorite build I’ve been keeping up with and it’s so cool to see how far it’s come

[@taz275]

i love seeing this project slowly move forward, its so awesome :D

[@mariomunoz525]

im convinced this dude has never worked a day in his life. He has been enjoying and having fun with his talents and been compensated for it. Thanks to youtube i get to enjoy this mans journey and appreciate the art that you create. As a gear head and a gamer, THANK YOU

[@Smilomaniac]

Good luck with your project! Cheering you on!

[@llorjo_]

The type of commitment I need to have😭 You are amazing my friend

[@logancook435]

Can’t wait to see the whole thing finished. This is an awesome project.

[@Bounty_Hunter0000]

Jeez, I follow your videos of quadra making and its crazy how much of time and hard work it takes to make stuff like that. I only wish I had that level of perseverance.

[@kobalt9948]

It's really coming together, looking amazing

[@LyykNevaDies]

Damn this dude is going all in , coolest project ever

[@pedrooscar1890]

Im loving all the passion and true skill that you are putting into this beautiful build. Once you finish it please let Frank Stephenson review it on his channel. He is a car designer and he loved the car in his video about the vehicles in 2077❤

[@EpicEquip]

You are absolutely legendary. I hope they add you in the lore as a Quadra designer or something at the very least.

[@jakubzylowski1399]

Subscribed only to see this finished. Truly amazing 👏

[@greatmalus826]

Congrats man, I'm enjoying each video more and more

[@Asstacular]

Absolutely sick build!!!

[@damianjendryassek7168]

This looks amazing can't wait for the full effect ! :D

[@patatetube]

Hi, your a great fabricator. i love the way you do things and solve engineering problems. you really inspire me. thanks and continue creating.

[@Hilqy]

absolutely amazing work

[@B74ck0ut]

Been following this for a while, can't wait for the finished result! Also great camera work! It's improved a lot

[@DariusMcScotty]

Unreal. We are witnessing the process of making a masterpiece💪🏻

[@bigongia4385]

being here from the first episodes it going to be amazing to see it finished and driving

[@wiktormadziar9758]

Incredible project bro. Cant wait for next parts, keep going !

[@marcinskiba874]

This is so cool, waiting for a final result!! Great job man!

[@unitedbolts8053]

That is pure KZbin entertainment. Good work, we are following it!

[@nytlyf]

Dude is a genius! This might be the coolest solo creation on the internet.

[@chonnyy2475]

Its coming together so well!

[@ethanscinematicuniverse3260]

Love your videos man, keep up the good work

[@MultiversalMind3]

So good, can't wait to follow more progress, keep it up!

[@Eyeslayer]

I'm no car person but i found this extremely interesting I got to learn a few things as well. like you did a spot weld almost right on the fiber glass i wasn't aware you could do that without doing damage to the fiberglass so that is something i'm actually glad i learned.

[@3rdpig]

Your attention to detail is amazing!

[@3_5_wP]

Loving these cyberpunk inspired car projects 😝😎🤘🤘🤘

[@seanscott7120]

Dude, you are amazing! I know it is a process but I can’t wait to see it done.

[@AudiccyYT0423]

I love that your even attempting this build, Cyberpunk has come to be one of my favorite video games and universes, I hope CD Project reaches out to you to do a collab or something because the thought of this is so cool!

[@peterz.3526]

Sometimes I forget how capable we are as humans, you are incredibly talented.

[@Chomp-10888]

This is my favorite thing on KZbin rn, keep up the good work👍

[@ggapples5465]

the amount of technica and technologic skill it takes to re-immagine let alone re-create in meta is cool. lol. Looked east due to the smoth transitions from 3D Mode rendering to Welding etc..is super chill. You have to have so much Disciplined time managment and cleanliness is at least worth a standing ovation. sweet..

[@PbThunder]

Amazing, can't wait for the next episode! Keep up the good work!

[@mirabelcreator2552]

This is insane, my man! You're awesome!

[@AndroidNoir-L06k]

its always fun to see another mans work.

[@FlynnReddy]

Can't wait to see more, This is an awesome build

[@santiagoedwin715]

looking amazing sir, I remember when this was just in its super early stages keep it up!

[@aztr0k1d]

The engineering going into this build is still so crazy

[@steampunkfox1411]

you are friggin nuts choom, cant wait to see this beast at the end

[@derikhembree6530]

i’m excited to see this build come to fruition!!! great job man, i hope CD project red and mike ponsmith sees this.