Burnishing Tool - email giveaway QCD

[@georgedennison3338]

First video of yours I've watched. Impressive. As someone who is just a beginner at 70, I especially appreciate you being thorough in your explanation. When you're new to something, a person just doesn't know the obvious stuff a more experienced person does & it is very easy to get yourself overwhelmed by the 'What about this.. what about that.." questions. You explained every aspect of burnishing, thoroughly, then demonstrated it. Thanks... I'm going to have to build one. I have a mini, mini, lathe I added rigidity & torque to, but it just wouldn't be able to do this do to lack of rigidity between the ways & carriage. (It has a composite gib; need to make some bronze, but my milling skills are lacking, (for now ). I need a scissor type burnisher, like the scissor knurler I have. It works like a champ on my little lathe. Gone on long enough, thanks... gonna go see some of your other vids & see what I can learn from ya. GeoD

[@TangentJim]

George -- Excellent Comments . When exchanging Ideas -- it goes like this . You speak - I listen then I speak - you listen . Meaningful results can be accomplished. Today people only speak - nobody listens . George - when you speak - " I Listen " Thank you for your comments . --- Jim

[@RaysGarage]

Very Impressive Jim, excellent results and very nice tool! I'm in for one!!!

[@stevenhavener7327]

I already built my own from your excellent first video ! best regards Steve

[@TangentJim]

Steve - it looks like Grass doesn't grown under your feet . Thanks for the comment . -- Jim

[@jameslezak7882]

Again, some really good stuff, Jim. I wouldn't mind owning one of those. Thanks for your time and sharing! 😎👍✌️

[@TangentJim]

Jim -- I'm putting one in my Tool Box . In the future I'll do a couple of Videos using what I am learning. Hopefully we can take it to a higher level . I really appreciate your positive comments -- they push me forward . -- Jim

[@MotosAndMachines]

I would love one of these. Looks super well made. Let us now about the product when available. Thanks for the video.

[@TangentJim]

MotosandMachines - e-mail me for the free giveaway [e-mail] -- Jim

[@dperfetti1]

Jim, I think you hit another home run. I want one in my toolbox, so keep in touch with the progress. Doug

[@TangentJim]

Dynamic Doug - Thanks for the positive comment. I need to play with this tool to learn about it's possibilities . At this moment I'm optimistic . Taper shanks peak my interest . --- Jim

[@dperfetti1]

Jim, I saw a video not long ago about a homemade burnishing tool and was thinking about making one. It had 5 different parts and a threaded cap that held everything together. It's a little more complicated to build. Yours looks much easier and faster to build. Let me know what you decide to do. Doug

[@TangentJim]

Doug - I viewed the video - It was great - I learned plenty. This could be a game changer . - Jim

[@FrancisoDoncona]

There is a indian youtuber that demonstrates two versions of this and how to make one. I made one in about ten minutes, works well. Only a lazy person would buy one because It's easy to make. I purchased a box of bearings and googled machine vise bearing ideas. This is just one of the ideas that popped up including quadrangle pivoting vise adapter.

[@TangentJim]

Francisco -- Ten Minutes - It took me a lot longer than that . Using a box of random size bearings ??? Not every will do that .The quality must be questionable . Consider me a lazy person. I don't make anything that I can buy. Unless the pricing is ridiculous . Thank you for your opinion . -- Jim

[@tates11]

Here is another channel with lots of burnishing videos even on the mill + pattern burnishing. - kzbin.info/www/bejne/eWm2nqhmZ5tkaJosi=UIriXWUTNoGAQz5K

[@tates11]

Sorry I lost the last comment - Here is another channel with lots of burnishing videos even on the mill + pattern burnishing. - kzbin.info/www/bejne/eWm2nqhmZ5tkaJosi=UIriXWUTNoGAQz5K

[@acmemachining]

I need one of those. Wow no wonder you are so busy.

[@TangentJim]

Todd - I'm not just another Pretty Face . e-mail me for the giveaway [e-mail] -- Jim

[@jasen963]

Where does one buy your products I like the sine gage The burnishing tool would be good as well?

[@TangentJim]

Jasen963 - You can buy our products Via e-mail . My e-mail address is [e-mail] I will put your name in our e-mail giveaway . -- Jim

[@jasen963]

@@TangentJim Thank you for your reply 🙏 Love ya work. 👍

[@makerman00]

Like the vid, always leanring new things.

[@TangentJim]

makerman00 - Send me an e-mail . Maybe I can put one in your lap. [e-mail] -- Jim

[@javaduke1]

I would DEFINITELY buy one!

[@TangentJim]

Javaduke1 -- Thank you for reinforcing my thoughts . I'm now in the process of doing the math to see if I can offer them at decent money . -- Jim

[@javaduke1]

@@TangentJim Well, if not, maybe you can just sell a set of drawings and some basic guidance on how to make one for say, $10 per set :) Seems like all the components and materials can be sourced from McMaster but still it would be nice to have some drawings and dimensions. Just a thought.

[@williambowen7007]

Great video, thanks Jim. I have my fingers crossed hoping I am the one.

[@TangentJim]

Bill - This may give you some comfort . I have very few subscribers - your odds of winning are pretty good. " Good Luck " --- Jim

[@daveb3910]

You should get a microphone, it'll help, you kinda sound like a robot. Cool project though

[@TangentJim]

Dave -- Thanks for the heads up. I didn't realize that I had a problem . - Jim