Bushwacker Fender Flares install on my project Jeep

Bushwacker Fender Flares YJ: amzn.to/3r0V0S9
Bushwacker Fender Flares TJ: amzn.to/3qP93d9
If my videos have helped you save some money , and you would like to give back to the JeepSolid Garage, consider joining my Patreon page!! There's no obligation though. I am happy to help others out, but it does take a lot of my time.
/ jeepsolid
JeepSolid Merchandise: Hats, Shirts, Mugs, etc: / @jeepsolid
👨‍🔧 A few of my favorite tools 👇
OBD2 Scanner. Must have tool: amzn.to/3arRurY
Pro-Lift 3ton Jack Stand: amzn.to/2RU6rGa
Pro-Lift 6ton Jack Stand: amzn.to/33R9epj
3 Ton Jack: amzn.to/2S5obyJ
Milwaukee 3/8 Cordless Ratchet: amzn.to/39x7WAO
Extendable Socket Wrench: amzn.to/2LJNV2k
1/2" Craftsman Impact Driver. amzn.to/3pvOi5T
24" Breaker Bar: amzn.to/2RnuSNC
Craftsman Torque Wrench: amzn.to/2Wj7JiD
Dewalt 1/4 impact driver: amzn.to/2GYEJ4w
Be sure to get the kit with 2 batteries. You'll be glad you did!
Craftsman 165 Mechanics Tool Set: amzn.to/2GXRlIg
Excellent tool set that will last a lifetime.
Oil filter Wrench: amzn.to/2IbgT9e
Large Capacity Oil Drain Pan: amzn.to/2OjqXjh
Subscribe: / jeepsolid
Follow Me!!
Facebook: / watchjeepsolid
Instagram: / jeepsolid
Twitter: / dale_jeepsolid
Professional inquires from businesses: email me at [e-mail]
#jeep #jeepwrangler #jeeprepair
Some of the links provided are affiliate links, where I earn a very very very small commission for directing you to the website. If you make a purchase, it does not increase your cost, but helps me fund my channel. Thanks for watching JeepSolid. I am not a certified mechanic, just a hobbyist who enjoys working on Jeeps.

[@TheFishingHobby]

I think they have you peel the film off the adhesive tape after you get the fender flare in place in case you need a wiggle room to get the screws to line up that attach the flares to the mounts. Then you could peel the backing off after the screws are started...at least that would seem like a logical explanation. Thanks for the video, I was thinking about ordering some for my YJ. They look great!

[@belto_80]

Those fenders look very good, I might get them for my Jeep

[@JeepSolid]

I really like the look and they seem fairly sturdy

[@jakef1977]

Love the look of those. I've been wanting to put them on my 94 for a long time. Thanks for the video!

[@JeepSolid]

Thanks!

[@Dogfun251]

I have the same on my Hugger Orange ‘87. They are stronger than they look.

[@JeepSolid]

Yeah. I really like them!

[@roccom5988]

Looking great my friend.

[@JeepSolid]

Thank you

[@thebruce9042]

Thanks for the video, but 650 bones??? That's crazy money for these things! That's insane. It probably costs them about $2.oo each to have them stamped out in China.

[@davidsmith2394]

They look great when installed. I found that some of the plastic moulded pieces didn’t sit flat, so I had to file them down a bit. May have been a qc issue but it wasn’t too bad.

[@JeepSolid]

I didn’t notice that with mine.

[@jefflee7248]

Would the stock factory flare cover the extra holes you made if you wanted to back to stock look?

[@JeepSolid]

I think it would cover. Its mounted on the same line as the stock holes

[@scottb6194]

Dale, kinda missing BroncoSolid. Is he still around?

[@JeepSolid]

Yeah. He’s still around, but hasn’t posted a video in quite a while

[@pmfith]

stock shackles? :D

[@JeepSolid]

Haha! Yep. Still lots to do