BUY THE RIGHT LUG NUTS OR LOSE YOUR WHEEL!

[@KantstandlamGarage]

Lug Nut Caps! ➫➫➫amzn.to/2XReqJC

[@rondhole]

I think plastic caps is rookie things, a hassle and just looks cheap.

[@RolanTHUNDER]

Good video. It's important to run the right lug nuts for your wheels. OEM and aftermarket wheels are different and require different lug nut styles. I'm currently in the process of getting a set of Advan lug nuts for my Advan RGII's on my S2000 :)

[@poboypowder7567]

I have vintage mags on my cressida for a Kaido racer build and my stupidity didn’t know you have to buy mags specific lugs, learned that one when my wheel came off going 45

[@xushenxin]

5:25 these 2 are the the same for me. no difference. 100% inter changeable.

[@jayc443]

Wow your great bro so I have those oem lexus lug nuts in with the washer my question is can I use those on a spacer for my back tires should it fit ok ? Or do I need special lugs for the spacer ?

[@shieksty]

Question: How do I know that lug nuts I purchase will fit on the aftermarket rims I'm looking to purchase?

[@THXIIIRTEEN]

Most aftermarket rims have a rounded tapered fitting, I am looking for lug nuts myself, I bought xxr 559 rims and will be getting 60 degree tapered lug nuts, those should fit. Will updated later.

[@NewAgeRedBoy]

@@THXIIIRTEEN update?

[@THXIIIRTEEN]

@@NewAgeRedBoy purchased muteki open ended lug nuts (60 degree angle) fit perfect on my xxr 559 wheels (60 degree seating) these xxr 559 wheels have a super deep lug not hole/seating, used 60 MM extended wheels studs (shank length) on my G35 Coupe.

[@THXIIIRTEEN]

Also, when purchasing lug nuts make sure you fully read the description and it should tell you the seating, most average lug nuts have a rounded 60 degree angle, same thing when purchasing wheels, the description should say the seating degree. If not try to contact the company. Also be very aware of this, the wheels I bought for my car had a super deep lug nut seating hole, and my oem wheel studs were way too short, so I had to purchase 60 MM extended wheel studs, this was my first time buying a wheel setup, so I was unsure if extended wheel studs were going to be too long, I wanted to buy closed ended lug nuts, but I was scared what if the closed ended lug nuts won’t touch the wheel when tightened because what if the closed ended lug nut didn’t cover all the thread etc etc which is why I went with open ended lug nuts sr48 muteki, so keep this in mind when purchasing lug nuts.

[@kristelarabit3511]

I wanted to quickly reach out and inform you that we currently have some fantastic deals on our eBay listing.

[@trankali7166]

Hey bro do u know whats the OD of those nuts?! I wanna make sure they're thin enough for my wheels . Trying to Google but nothing come up

[@juanavila5956]

Im trying to figure out which lug nuts to buy for my Enkies TS-10s, they will be going on my 2006 Lexus IS350, will those 12mm x 1.25 fit that you had on your ISF?

[@kristelarabit3511]

I wanted to quickly reach out and inform you that we currently have some fantastic deals on our eBay listing.

[@jazej5516]

I got some 1320 performance lug nuts and they were 30$....low key worried about using them. Should I get some other nuts?

[@kristelarabit3511]

I wanted to quickly reach out and inform you that we currently have some fantastic deals on our eBay listing.

[@jeffreyventura8405]

What’s the difference between 1.25 and 1.5 ?

[@nhantran98]

Thats the pitch of the thread, google your manufacturer spec

[@DUNGSTA]

Did you mess up putting the volk sticker on the wheel or did it get damaged?

[@KantstandlamGarage]

The wheels were powdercoated and the stickers were put on after but after they went to get tires put on, the machine messed it up lol

[@oSMILEYox]

I went to a wheel rim shop to get some lug nuts for my aftermarket wheels and they gave me those small ones that you call adapters .. when i go between 55-65mph my steering wheel shakes to the sides not vibrate actually shakes .. which lug nuts should i buy idk much about aftermarket wheels 12x1.5 is my lug size

[@KantstandlamGarage]

Should always confirm that the wheels you are putting on are made for your car, that is it also balanced and not bent, ensure that the seat of the lug hole on the wheels are either cone or rounded, this would help with choosing the right lug for your wheels. Also torque the wheels down evenly. if nothing seems to be working, maybe check your tires and alignment.

[@oSMILEYox]

@@KantstandlamGarage thanks for the reply ……ill try to get my tires balanced hopefully it fixes my problem

[@Mario-hd5se]

What lug nuts would you recommend for gram lights 57Cr?

[@KantstandlamGarage]

I like any floating lug nut like these

[@adrianorozco6250]

These r26 are floating ends too ?

[@KantstandlamGarage]

Yeah. Which I like a lot but you just can’t over torque them

[@WEESHBONE]

I sincerely thank you 👍

[@marcusrobinson-Live4Love]

Informative!

[@Niyasutton]

This video probably mad so much more sense for people who kno about this stuff lol can someone tell me the best lug nuts for a Nissan Maxima , 2017

[@jose092596]

theres something called google

[@Niyasutton]

@@jose092596 oh really what is that?? Your mother?

[@jose092596]

@@Niyasutton Your comment defines your stupidity.

[@dylanbagona4031]

What would you recommend for the te37 wheel?

[@franchisefred4066]

Conical tapered tuner lugs

[@kristelarabit3511]

I wanted to quickly reach out and inform you that we currently have some fantastic deals on our eBay listing.

[@thelewiscenter3076]

is that car fed legal

[@xNAVAx562]

Great informative video! 👍

[@kristelarabit3511]

I wanted to quickly reach out and inform you that we currently have some fantastic deals on our eBay listing.

[@77felixthecat]

Awesome job thanks

[@kristelarabit3511]

I wanted to quickly reach out and inform you that we currently have some fantastic deals on our eBay listing.

[@77felixthecat]

@@kristelarabit3511 can you send a link to the site