Which LUG NUT should I buy...?

[@KikoLetoma]

Konigs are my wheels of choice. Just picked up some Countergrams!

[@Hoster987]

Which one (stainless steel vs TI) would endure impact wrenches better (scratches, etc.)?

[@konigwheels]

Stainless Steel would most certainly be more prone to scratches. Titanium is harder than SS. The ABSOLUTE BEST way to avoid scratching your lug nuts and wheels though is to use vinyl-sleeved sockets. Not expensive, a must to have in your kit.

[@PELPIDAS]

Great video, one question though. I know i need conical seats but i don't know the angle. Most aftermarket rims are at 60⁰, how about heliograms? 60⁰ as well??

[@konigwheels]

Yep they sure are. All of our wheels require the use of a Conical seat 60-degree tapered lug. We recommend using a tuner diameter or spline drive lug nut.

[@PELPIDAS]

@konigwheels thanks so much!!

[@elioakel1759]

My oem lugnut isn’t reaching the stud with the new wheels should i try putting the cone shape lugs to see if it works

[@konigwheels]

Yes, when installing aftermarket wheels, you can't use your OEM lug nuts. You'll need to get some conical-seat lug nuts. If you need a walkthrough on that, search lug nuts on our channel.

[@elioakel1759]

@@konigwheels thank you mate

[@konigwheels]

@@elioakel1759 No problem. If you need any more help on wheels, we're here. Cheers.

[@JLGolf26]

I have seen some pictures of people using small diameter spline drive lug nuts on OEM GM wheels on pickups,but the lug nut seems like it is just barely bigger than the hole in the OEM wheel.Could the wheel actually pull over the lug possibly since it is barely bigger than the wheel hole?I see most sites that sell lug nuts say not to use small diameter aftermarket lugs on OEM wheels.

[@sundaerecamadas5428]

What is the best lug nuts for ROH wheels?

[@konigwheels]

Not to sure you'd have to check with ROH but, All of our wheels require the use of a Conical seat 60-degree tapered lug. We recommend using a tuner diameter or spline drive lug nut.

[@sundaerecamadas5428]

@konigwheels thanks a lot!

[@timd5597]

I bought a used Acura with aftermarket wheels is there a way to find out what is the seat shape

[@konigwheels]

Most aftermarket wheels will feature conical-seat (cone-shaped) lug holes. If you want to be certain, it would be a good idea to contact the wheel manufacturer directly and ask them what seat-type they use.

[@Tomoose]

any recommendation for a 18x8.5 dekagram? want to order them before my wheels get here

[@konigwheels]

Recommendation in terms of lug nuts? You don't need to get too far into the weeds when picking out a set of lug nuts. Just make sure the material quality is good and that they are conical-seat lug nuts.

This reply is not helpful at all.@@konigwheels

You never explained anything on the SHANK LUG NUTS. What will happen if the shank is shorter than the oem. Is there a safety issue with that? Does anyone knows?

[@konigwheels]

A Shank Lug nut is simply a type of lug nut. As long as you have sufficient THREAD ENGAGEMENT, then you won't have any issues. To measure your thread engagement, we've done a few videos on this, pretty simple to do.

[@NOAHCASAS]

@0:36 & @5:46 LOOK VERY FAMILAR IN THE [H]ONDA YOU·TUBE WORLD

[@konigwheels]

@alldayanthony ! One of our O.G.s!