Buying only the DJI MIC2 Transmitter! Here are my concerns, hope DJI FIX it...

[@tathagatabandopadhyay2672]

Helpful informative, thanks 😊

[@DaKabayanTek]

Glad it was helpful!. Thank you very much.

[@LucasCho-c4e]

I'm going to buy only a transmitter and use it for Android spats. Can I remove noise and record 32 bits if I don't have a Bluetooth connection? In the video, it was confirmed that it is not possible when connecting Bluetooth.

[@DaKabayanTek]

The noise cancelling and 32bit float only works if u have the dji mic2 receiver or if u are using a dji action camera or the osmo.

[@kennethpaulcalangi4122]

very useful for vlogging. especially for motorcycle vloggers. idol, ako po ung nag tanong sa inyo regarding my iphone 7 UNABLE TO ACTiVATE (possible baseband issue). there are some people via FB groups related to iphones are saying it can be fixed through BYPASS (they're asking for my phones S#). is it true. though wifi use na lang daw and asking for a quite a high fee for the fix... I'm asking this as this is my only phone... more power

[@DaKabayanTek]

No Sir… it will not work thru wifi po yung unable to activate kase baseband issue ko yun

[@Motor_.MantraYT]

I'm only buying the transmitter for my Action 4. Does it connect automatically when switching the Action 4 on? After the initial setup is completed?

[@DaKabayanTek]

As per the video, u have to re-pair it again

[@lukeridess]

It does for me

[@DaKabayanTek]

You only have the receiver or the whole set? Just curious....

[@jmartinez728]

It connects every time for me. If you pair it with another device, then yes, you have tp re-pair. But if its just A4 to Mic, it should work every time you tunr it on. You have to give it time to register the connection. Usually between 10-15 seconds.

[@fishingrocktv]

Mic can work how many hour when the battery full of charge?

[@DaKabayanTek]

an average of 10-13 hours...

[@Virtual_Ambient]

Hello, I just bought dji mic 2 white and I have a problem that I can't turn on the noise reduction using the button on the mic2, the button doesn't respond at all. I can only do this in Pocket 2. Is the transmitter damaged?

[@DaKabayanTek]

As far as I am aware unless they address this in the latest firmware, if you have a transmitter only noise cancelling will only work on dji products or if you have the dji mic2 receiver. If you are pairing it to a non dji device using the mic transmitter only then the noise cancelling will not work.

[@fishingrocktv]

One mic can work with 2 osmo action cam in same time?

[@DaKabayanTek]

I have not tried that sorry

[@lukeridess]

Does active noise canceling work when using it with the action 4?

[@DaKabayanTek]

Yes it does on the action 4

[@Thundr4x]

if you buy transmitter only in DJI shop, the staff can help you set these settings. Hope this helps!

[@DaKabayanTek]

I already did that option as soon as I got the device. Thank you for watching the video

[@Vrammoman]

Is this supported in dji action 2?

[@DaKabayanTek]

Based from their website, it says it is compatible. Personally I have tested only on dji action 3 & 4

[@jmartinez728]

The standalone DJI MIC 2 recieve is not compatible. If you have the entire reciever set, then yes.@@DaKabayanTek

[@DaKabayanTek]

thank you for the clarification...

[@ChoaYeon]

when yo turn on the 32bit float from the osmo action do you have to stay connected to the action 4 or will it just turn it on and you can use the mic with other devices?

[@DaKabayanTek]

you can only use it on the device that supports the 32bit on the menu of the device.... I have not checked with the latest firmware if they have included it on the actual mic

[@ChoaYeon]

@@DaKabayanTek but doesn’t support 32bit float when recording internally on the mic? So wouldn’t that mean it will save after you turn it on?

[@aybspaw]

Ask lang po. Kase kakabili ko lang den ng tranmitter same white edition den, tps phone lang den gamit ko. Sa dami ko pinanuod sayo ako napadpad sakto content nyu. Ask ko sana yung sa 32bit pa na ON naba yun tps nag record ako sa phone ko goods naba yun or ang 32bit recording supported lang ng another dji product action camera or pocket 3. May update ba ang noise cancelling since kaka labas lang nila ng new software para sa mic2, ito talaga kase habol ko kahit phone lang gamit. Sana ma replyan thanks

[@DaKabayanTek]

Brother yung 32bit recording ma aaccess mo siya sa mga dji devices, unfortunately wala pa sa firmware update para sa transmitter, also similar dun sa noise cancelling either need mo ng dji device or yung receiver nya

[@toz8983]

[@DaKabayanTek]

🎬