How To Build A Shed And WHAT I WOULD CHANGE ONE YEAR LATER

This DIY building a shed project is all about how to build a lean to shed from start to finish. This DIY shed tutorial shows the step by step process of pouring and a 1 year recap. SHED PLANS HERE: byotools.etsy.com Bring Your Own Tools (#BYOTools 166).
Apparel List:
-Georgia Boots: bit.ly/3yZ4M6J
-BYOT Shirt: bit.ly/2T6l8dE
-Pants: amzn.to/3fU3ySJ
-Work Vest: amzn.to/3ge4jou
Material List:
-Wall Control (Medium): amzn.to/3oqDVfN
-Wall Control (Large): amzn.to/3b5SJ0g
-Wall Control (Accessories): amzn.to/3z5SVEP
-Concrete: homedepot.sjv....
-Wood Stakes: homedepot.sjv....
-Rebar homedepot.sjv....
-2x4x8' Studs: homedepot.sjv....
-2x4x8' Studs (PT): homedepot.sjv....
-2x4x10' Studs: homedepot.sjv....
-2x4x10' Studs (PT): homedepot.sjv....
-4x6x8' Header: homedepot.sjv....
-2x6x8' Roof Rafters: homedepot.sjv....
-1/2" Wedge Anchors homedepot.sjv....
-Hurricane Ties amzn.to/2LafoJt
-1.5" Galvanized Nails amzn.to/2FmYKCH
-Weed Block amzn.to/31N08rK
-1/2" Plywood homedepot.sjv....
-3/4" Plywood homedepot.sjv....
-1/2" Plywood Sheathing Clips amzn.to/3zl49nY
-3/4" Plywood Sheathing Clips amzn.to/3iFunf5
-Exterior Sheathing Screws amzn.to/3iCjWsz
-Drip Edge Flashing homedepot.sjv....
-G-Tape amzn.to/3ivLcZY
-6" Membrane Flashing amzn.to/3iOeTpp
-3' Tyvek House Wrap homedepot.sjv....
-Window homedepot.sjv....
-Door homedepot.sjv....
-Roofing Felt homedepot.sjv....
-1.5" Galvanized Nails amzn.to/2FmYKCH
-3/4" Galvanized Nails amzn.to/3zkzd7j
-5/4 x 4" AZEK Trim low.es/3A3tUtB
-5/4 x 8" AZEK Trim low.es/3zVcqQ1
-Cortex Fasteners amzn.to/3A3nCKg
-AZEK Shingle Siding bit.ly/3qqsLrA
-Paint Primer amzn.to/3vXMmR1
-NuRay Metal Roof www.nuraymetal...
-Z Flashing thd.co/3wYEGPV
Tool List:
-Framing Hammer amzn.to/2XmNErF
-Wheel Barrel homedepot.sjv.io/4eaXo9
-Shovel amzn.to/3x4onRd
-Bull Float homedepot.sjv....
-Drills amzn.to/2SbHzO1
-Circular Saw goo.gl/itL8ST
-Jig Saw amzn.to/3ij6Zno
-Palm Nailer amzn.to/2RvgW1A
-Air Compressor amzn.to/2IzBeEo
-Framing Nailer amzn.to/2VYLLQx
-Tape Measure goo.gl/nguoOO
-Speed Square amzn.to/2FrIuQK
-Contractor Square amzn.to/2TER2O5
-6' Level amzn.to/2J301Qo
-2' Level amzn.to/2RuPUHF
-Hammer Drill amzn.to/34Rec6m
-1/2" Hammer Drill Bit amzn.to/2S6pTU6
-Jig Saw amzn.to/3ij6Zno
-Air Compressor amzn.to/2IzBeEo
-Staple Gun amzn.to/3cxsu08
-Tape Measure goo.gl/nguoOO
-Speed Square amzn.to/2FrIuQK
-Contractor Square amzn.to/2TER2O5
-6' Level amzn.to/2J301Qo
-2' Level amzn.to/2RuPUHF
-Utility Knife amzn.to/2SsOToC
-Air Compressor amzn.to/2IzBeEo
-Coil Nailer amzn.to/2SZU9QZ
-Finishing Nailer amzn.to/2SxBuvA
-Chalk Line amzn.to/3xSZjwM
-Contractor Square amzn.to/2TER2O5
-6' Level amzn.to/2J301Qo
-2' Level amzn.to/2RuPUHF
-Paint Sprayer amzn.to/2Ux7Nv4
HUGE thank you to AZEK Exteriors for sponsoring this week's video. If interested in leaning more click here: azekexteriors....
BYOT News Letter byotools.me
BYOTee Shirts Available NOW! teespring.com/byotools
Instagram / byotools
Facebook / byotools
TikTok / byotools
MUSIC:
Min0:00 - Venice Beach: Topher Mohr & Alex Elena
Min55:15 - 1 YEAR RECAP Pata Pata: Miriam Makeba (Matt Cherne Remix) www.chernebeat...
#byot #diy #howto

[@BYOTools]

Multiple Shed Plan Sizes NOW: www.etsy.com/shop/BYOTools?ref=shop-header-name&listing_id=1396101371&sort_order=date_desc

[@bryanakers6023]

I've watched a lot of shed build videos and this is my favorite one. Thorough, for sure. I'm still on the fence as to whether I will build or have one built, but this is inspirational.

[@florencehallard3904]

Probably the best Ryan’s kzbin.infoUgkxGZedDTcDfgD7fG_uU4esfx_EgxzlY2_1 Plans on building a shed is hardly ever found. And Ryan takes the mystery out of different types of foundation options, etc. He even shows how to build a shed with different designs. Very comprehensive, covering different roofing materials, siding, etc.

[@anthonywilson1754]

I'm age 21 and been working in construction just over a year. My questions (given my relative inexperience) is why you didn't install foal sill sealer to help prevent water from concrete going to the wood?

[@John.Paulis]

Curious though, why not just use OSB? It’s usually allot cheaper than plywood

[@rossr6616]

Excellent build; I wish our house from the '60's was built as well as that shed ;) Sad to see so much PVC in construction, as it's so toxic from point of manufacture to degradation, but kudos to Azek for using mostly recycled PVC stock!

[@byroncruz8980]

nice work. I'd highly recommend a small hand roller to apply the waterproofing and next time don't forget the sill gasket!! Any wood on concrete is a no-no. Good luck on future builds. nice video.

[@htownblue11]

This shed will outlast his neighbors’ houses. Venting was a smart addition obviously. In the south we have to have venting due to the heat. Slick peg board system. Was wondering if you’ll ever consider the door opening outward? Regardless this shed is nicer than many homes.

[@BYOTools]

Good question and It's not a PACKED shed so the inward door is not an issue but I could see that being the case if it was a packed out shed haha. Thanks for watching TJ.

[@Drakeziel]

The vent was the only true issue I had with the shed I built while referencing your design. Framing is one of the more enjoyable things in life.

[@blazetownsend8785]

The lean too shed actually doesn't need a roof mounted vent, and can be vented from the soffits on either side because it already has a high point and overhang. Though a gable end vent would work as well. Just get vented gable or vent both sides of the soffits. I vented through my soffits in my build and it is amazingly well regulated inside the shed. I also used a metal corrugated roof instead of a shingled roof.

[@BYOTools]

I love the framing process as well. Thanks so much for watching and glad this video finally took care of the venting issues haha :)

[@KennethPelczar]

How much did this shed cost total?

[@rfauske]

so much work on waterproofing but no membrane between the bottom plate and the concrete. (yes it was treated but it will still get wet)

[@anthonywilson1754]

Also--so many nice things in this video.

[@dc5duben96]

so much great info and tips, thanks and keep the videos coming!

[@СергейСергеев-ю3с5р]

Спасибо ! Вы лучшие 👍.

[@EfffGeeee]

Very nice and well thought out. I do think that it is a shed so all the extra steps seem a bit unnecessary.

[@dhesgonzales9840]

Nice style

[@rohanyoandje9003]

Nice work

[@tbarg86]

Pretty sure I enjoyed this more so the 2nd time around. Love your videos, very informative

[@BYOTools]

Love hearing that and thanks so much for watching.

[@yaqoobtabsu3362]

excellent

[@enak001]

Very cool! I would love to see shop drawings if you could share them.

[@BYOTools]

byotools.me/shop shop drawings are available here. Thanks so much for watching.

[@anthonywilson1754]

Another thought I had is that you didn't add a filler board to the bottom of the door. You cut off the bottom and removed the original door filler. A simple addition to the bottom of the door, yes?

[@ilovepizza8263]

do you think someone who has never built anything with wood can do this with another inexpirienced helper? I need a shed as well

[@JustTheFactsYall]

Dang it’s already been a year. How time fly’s. Okay time to watch the video!

[@bryanlloyd1099]

Nice job as always!!

[@BYOTools]

Thanks so much for the support Bryan as always!

[@bryanlloyd1099]

@@BYOTools You are very welcome!

[@josephmercado2668]

Solid

[@BYOTools]

Thanks for watching Joseph.

[@mikepagliei426]

Hey Brent. Love your page. How do I get plans?

[@BYOTools]

Thanks so much Mike! The link is in the video description but here it is just incase: byotools.me/shop

[@bmfairweather]

Is that sanded ply for exterior?

[@Foodie-yj1qe]

Thank you for the great instructions you provide Brent. I really enjoy your videos. Brent I want to buy your plan for the shed build but have a question… How do we weather proof the sides which back up against the back wall. I want to attach it to my brick veneer house, but the concern would be the same regardless of it being weatherboard or brick veneer. My concern is when it rains directly in that area (back house wall) or when the wind pushes the rain in that direction, it will rot out the back wall. Thank you Brent, you’re a legend!!

[@lalalajuice]

Well I guess he has no idea. 🤪

[@HimmyNeutron42069]

@@lalalajuice if hes using interior doors as exterior doors he def has no idea

[@lalalajuice]

@@HimmyNeutron42069 That's a great point!

[@ashleyfalcon125]

Wouldn’t the roof cover the area where the two connect??

[@dqauto500]

Instead of using pressure treated wood 2x4 could you use that pvc type of 2x4? It’s pricey but you’d only need a handful.

[@MichaelBlast]

At around 25 minutes into the video you apply a 6" membrane tape material. Is there a specific name of this product that I can search HD or Lowe's for here in Florida? Thanks

[@walterrodrigues9077]

Nice 😊

[@fazaldgx6822]

Super

[@brianwin5183]

nice

[@kristinen6617]

Wow, you could’ve trimmed the trees while you were up there on the roof

[@bindiberry6280]

Why don't people lay plastic sheets under edges ( only the edges so water is no really contained ) under the concrete slap?

[@ghsbgyzh]

Wahoo

[@celyl]

What is The overall dimension ?

[@sdksniper]

Let it started?

[@BYOTools]

Hope you enjoyed the video.

[@warwickclark2143]

I just spent an hour watchin’ a man build a shed.

[@BYOTools]

I hope that means you enjoyed the process haha! Thanks so much for watching.

[@AmirKhan-mn2cs]

👍👍

[@stevenssendegeya7945]

❤❤❤❤😊😊

[@John-cf4iv]

You always make great, informative videos, but you cut back on your use of the word "extremely?" Thanks!

[@safeword_whiskey]

@ 6:08 he sent that ant to the shadow realm

[@rossr6616]

a good son, cleaning out his parents garage ;)

[@stevenbolin7688]

R you a LDS

[@AlainStar]

👏👍💪🔥

[@BYOTools]

Thanks for watching!

[@SyddlesFuzz]

Come to the other side of the sound and teach me your ways, sir! x3

[@kfourom]

"Over Time, Over Time, Over Time".

[@VK_DiggerKir]

Спичка

[@carbs66]

uhhhmmm.. does anyone else think this build is complete overkill for a shed? are you expecting 4' snow loads?

[@rockporttigger7138]

That is not the proper method to install hurricane straps/brackets. They must be sandwiched between 2 rafters/pearlings, headers and/or studs. On both sides of the brackets/straps. You should have placed your header beams side by side with the bracket nailed to the inside seam, that would have been correct. Same for the studs below them, even if you use a cross brace to sandwich the bracket between a second unmovable block.. Placing brackets on the outside of any surface is useless. In places where it's code to do it right, this would fail and you'd have to totally rip it out and redone.

[@romanamerlene8554]

WoodPrix is nice for that.

[@alishuseynov4521]

Another thought I had is that you didn't add a filler board to the bottom of the door. You cut off the bottom and removed the original door filler. A simple addition to the bottom of the door, yes?

[@tylerwatt12]

The door had lots of issues. I was surprised to hear not a lot of people talking about it. He used an interior hollow core door with MDF jamb, but it didn't have a threshold either. The lack of a threshold should have been a glaring issue from the moment they bought it