C-Notching the Frame on the

[@toddmccarter45]

Man you guys are on fire lately. I can't believe all these most recent apache truck were all filmed the same week, and there is still more left. You guys really know how to get some stuff done!

[@DEBOSSGARAGE]

It took a pile of planning. Probably over 150 emails between the Twins, Mike and getting parts.

[@toddmccarter45]

@@DEBOSSGARAGE well ya'll are doing GREAT!

[@justinwatch]

What planning. You just jump on a plane to Vegas and make a few phone calls on your way out and bang! It's so effortless Andy could have built 10 Apaches by now. Andy seems like such a swinger.

[@andrewkrose12]

@@justinwatchmore stripper than swinger.

[@v8motors.]

Apart from the great content as always, the editing and production values are fantastic.👍

[@DEBOSSGARAGE]

Thanks! We appreciate it

[@matthewlittle6940]

-15C in the garage working on a 98 honda shadow turning it into a bobber, love watching these while working!!

[@jonnewton5929]

Always a pleasure to watch your show mate. Very knowledgeable and practical. Cheers Rich.

[@braedon.builds]

Came in from the shop discouraged on my 68 C10 build, perfect video to help clear my mind and motivate me to push through and keep making progress! Thanks Rich! See you at Motorama 👊

[@bernhard8540]

That's the one thing I think you guys would benefit from immensely. Is a plasma table and Aaron could easily learn how to run it and then rich could make so many more things that are ideas in his head❤❤❤😊

[@minnesotatomcat]

Are u a welder?……….um, I HAVE a welder 🤣

[@minnesotatomcat]

Plasma tables are a godsend! We got one at my work and the amount of time it saves is incredibles and even a computer illiterate hick like me can easily operate one with minimal instruction.

[@DEBOSSGARAGE]

It will be my next investment.

[@semorrison7082]

Absolutely love the collaboration videos.

[@alanpaulick7815]

Well done guy's on the fabrication. Enjoy watch your channel.

[@Cujo8778]

Best mechanic on KZbin . !!!!!! . Never let's me down on content

[@DEBOSSGARAGE]

Thanks man, much appreciated

[@johnd21]

That thing is looking great so far. Gonna have to get you a cnc machine for your shop if you don’t have 1. Things are amazing. Love the builds !

[@davidgleason6400]

Rich…truck is coming together.It’s amazing to me what you can do with an old and forgotten vehicle…turning it into an awesome hot rod anyone would be proud to own. Love the videos…take care and God bless…David.

[@DEBOSSGARAGE]

Thanks man!

[@matthewgorshe7650]

I cannot get over how clean that frame is

[@benbloomer7503]

You sure do nice work. I wish you lived down the road from me. Thanks for sharing the journey.

[@thedudeprime4677]

It's so cool seeing you guys building a project 30 minutes from where I live, I just wish it was possible to finish my build for you guys to check it out

[@stanleymartin1613]

I'm digging it. Neat stuff. Enjoyed watching ✌️ 😎

[@CarswithNash]

When you were drawing out that C notch Rich I briefly thought that Chip Foose had dropped in for a visit!😉

[@larrydavidson3402]

What an exciting build this is.

[@FruitcakeFarms]

Love the grinder cutoff over the thigh. Reminds me of the circular saw movies in high school shop class where carpenters doing that would cut off their legs. Still can’t figure out how the film crews were there just in time for those events.

[@fergusonhr]

I had 18 stitches on my thigh from doing that...black cut off wheel chucks in my 🦵 uhg

[@gregskufca755]

Digging this build just like all your others!

[@DEBOSSGARAGE]

Thanks man!

[@grooveguy]

NICE. DeBoss drop on my Saturday afternoon!!!! LOVIN' LIFE now baby. I love the beat of that intro song!!! Fires me UP!!! ❤️❤️❤️ AARON AND RICH frickin love you guys man!!!! Let's GOOOOOO!!!!

[@keithmunz4160]

You really should bring poor Vince out of the cold and let him weld. And I noticed that one foreigner is wearing a tee shirt and the other guy has a hood and a stocking cap on. Toque.

[@fonhollohan2908]

Manuel got one of those newer type migs that has the option of a plus setting capability the power level speed will automatically adjusts with the wire feed speed that helps make adjustments where it's needed, basically giving you the perfect setting. The older type welders didn't have that function avail but if you know how to adjust the wire feed speed it's really not a issue. but if you have it, it helps you acquire a more uniformed weld. So basically the machine is helping you get a looking weld which makes your welds even look better. Btw those rims and tires look fantastic. This truck is going to look incredible when its finished.

[@Juicernaut]

Awesome content! Loving #ApacheStroker series

[@shanethompson7543]

Can't wait until the next video!!! 👊

[@garyworokevich2524]

Get out there, and work on something, preferably where it's warm and sunny. Amen to that. Where I live we got an ice storm, another on the way. Thankful I know someone with a large well heated shop. This little pick me up is sweet.

[@earlpotter2795]

Anyone notice how the guy from California is wearing a hoodie and beanie and the guy from Canada is wearing a light shirt with his sleeves pushed up and a baseball hat? Must be cold. :D

[@SootyDiesel81]

Last 4 link I did I had no option but to put the panhard bar in front of the axel and it worked perfectly

[@crazzykanadian2685]

Keep it coming, you guys rock

[@LostInThe0zone]

Granola for your loins. Funniest line in the video.

[@SlipFitGarage]

I've always liked 5 spoke wheels.... and these wheels look great!

[@DEBOSSGARAGE]

They are a perfect fit for the truck

[@pikehunter23750]

Famous last words..... "Granola for your loins?" Fair trade indeed!!

[@andrewkrose12]

I’d like to meat them.

[@troyadams1076]

Thank thanks for sharing really help me

[@johnkranz4004]

Looking very good Rich

[@shanewright6958]

Looking good guys 👍👍

[@Billyspacerocket]

All of the loves for your practical math 👍👍👍👍👍👍👍

[@ronaldsmith214]

You make great content what a guy

[@42Goopy42]

One of my friends has a buggy with a 9inch in the back and it has a short panhard right to the top of the pumpkin. Lots more clearance on the buggy though lol. Never seen one mount with a shock like that, looks good!

[@paullutherborrow637]

This is awesome how you guys are just working all this out as you go ! Maybe an adjustable wishbone on the top of the pumpkin to two mounting points up high on the chassis would work better than a panhard bar and look cleaner than seeing the panhard from the rear

[@mikemchaney1003]

Love the wheel choice. Please tell me there is going to be more to the panhard bar and coil over mounts. Single shear mounting on all those main components? I understand utilizing the shock mount as part of the panhard bar mounting, but there should be a second shear point to encapsulate that and the top coil over bolts. Single shear on a shock may be fine, but the coil overs and panhard bar??

[@DonVDBorgh]

Mooi! Looking great 👍👍

[@patrickkavanagh5335]

You know I love your video. Always watching.

[@brandonfloyd6321]

Ive seen setups the panhard went from frame to a bracket welded on the back of the pumpkin of the axle housing.

[@shaneholloway8877]

that gear oil looked like roof patch!!! could of used it to fix the shingles peeling up off my shed lol

[@garnetheron4885]

That oil coming out of the differential is next level thick

[@alanwheelock1460]

love the ryms

[@johnfranke9655]

Forget the Panhard rod, use a watts link, it will keep everything moving up and down in the same plane, and not pushing it sideways

[@dickmick5517]

Love you guys. I thought this was funny. You can do it with basic hand tools. LOL and a Cnc plasma cutting. VBG.

[@leetester8612]

Really enjoying this build. Thanks.

[@MikhailScottKy]

Yeah, and it never hurts that you could work in California instead of Canada during the winter on a project.

[@DEBOSSGARAGE]

I may be good looking, but I'm not stupid

[@joshhelland8836]

I get stressed from all my unfinished projects. Then I watch Rich and get stressed about his unfinished projects.

[@DEBOSSGARAGE]

Just watch all the finished projects on the front page and remind yourself that I finish everything I start

[@joshhelland8836]

Yeah yeah we all know your awesome. I'll finish building my house once I'm done watching this video.

[@chrisderr6375]

Use radiuses instead of sharp corners and your "C" notch will be less likely to get cracks. J/S

[@darthgator639]

I commented the same, that is a crack failure point waiting to happen.

[@fergusonhr]

I will let you weld too...(in his head he says, "because you need the practice")

[@marscruz]

Getting parts in one day is something that guys in SoCal take for granted. Except when every once in a 100 years the Grapevine gets shutdown because of snow. Atascadero doesn't have that problem because it's on the (101) and not (eye-5). Rich, Aaron and Andy have good timing. Must be something to do with living in the *_Rust Belt._*

[@darthgator639]

Looks great, but not sure about those sharp angles on the notched frame at the rear axle. That's a crack failure point waiting to happen.

[@rustyjunk1997]

Man u need to check out puddins fab shop for low rider ideas.

[@philmckanna5173]

Hey Vince, get your passport 😎

[@1one3_Racing]

Geeze. Not real fanatical about that single sheer cantilevered bolt holding all the weight and torque

[@edwardkelly-murphy3689]

More travel style videos with other creators ❤

[@DEBOSSGARAGE]

We will be hitting up a pile of places on the drive home. Very much like the Bronco trip home

[@koreywilliams4570]

One of these days I'm going to buy a plasma cutter. There's so many things you can do with those little things.

[@Ben-in6qh]

Next time put your wheel studs in the freezer before fitting, warm the hub, drop straight in 👌🏿

[@neilrensen8950]

easy to tell which one is the Canadian by the way they're dressed in the opening scene ;)

[@erroneum]

I'm not an engineer, so take everything I'm saying with some salt, but for those braces, I wouldn't have made them with hard angles in them. My understanding is that sharp angles concentrate stress, so if they were made with gradual curves, then while it would have been more annoying to make the plating for the top/bottom fit, it would probably have lasted better.

[@186scott]

Thought for your next project (not sure if you have done it yet or not) is to see how quickly you can do a build from start (buying it) to finish (some form of show)

[@DEBOSSGARAGE]

Any "Quick" project is never done right, and 1/2 the build will have to be done again. Wiring always gets cobbled, and the long days lead to crappy workmanship. If you want to watch that, just watch the "reality" shows on MT

[@koreywilliams4570]

I just sold my truck today. 96 s10 4.3 v6 5 speed trans. I paid 300 bucks for it about 4 years ago and it's been a great truck. Sold it for 600. 😁

[@DEBOSSGARAGE]

Hustling!

[@PSP2000MAN]

You thinking about beefing up the front side of those rear struts where shes cantilevered off the crossmember?

[@sandrapoyner1353]

Amazing 😧👍👍🇭🇲

[@copperman7133]

Awesome truck build . I love everything y’all done to the truck . Is this truck a Longbed or shortbed?

[@DEBOSSGARAGE]

Thanks! It’s a long bed

[@gasgasgas]

One shall not show a broken Milwaukee publicly!!!

[@juanieto810]

love this truck! What size wheel and tires are these?

[@morgansword]

Seems no matter where you go that there are deer around, they just seem like pets... so curious they are.. and tasty if too many show up. One thing for sure, capture one and you will find out, extremely good fighters and will kick the stuffing right out of you. It sounds like a love hate affair with "Ford" parts as in the nine inch rear end. I know one thing for sure, it takes far more than a flathead to pull one apart from power without serious additions to the power supply.

[@morgansword]

Mr DeBoss, can you make a from from a car with a unibody car with short sub frames from the front and rear... like those sixty dodges and plymouths?

[@jeffreywilson690]

I think the deer you were seeing are blacktail supposedly is so species between whitetail and mule deer

[@tomcleghorn4005]

Love what you guys are doing. I’m living through you!!

[@1tarbaby1]

Why didn`t you guys make as a watts linkage , then regardless of the height the diff will still be centered.

[@FORDLYFAOTEAROA]

The height of the c notch vs the factory chassis height is driving me crazy. First one I've seen that doesn't carry the height of the chassis right through the notch and out the tail end.

[@DEBOSSGARAGE]

The steel should be flush with the top of the wood if we use 1" wood. will also leave a nice spot to weld tie-downs for the cafe racer

[@jefferybuchan4235]

That poor first gen firebird rotting away in the back ground crying to be worked on next. lol Oh the deer where cool too.

[@northernlits425]

ditch the pan-hard bar and go triangulated 4 link @ the rear, FTW

[@kevinAuman1]

That really sounds like a "HER PROBLEM" n not so much your problem at all!!! Lol-ol-ol @26:23 and I quote " I got lots a meat n there i think I'm too long" 🤣🤣🤣🥩🍖🍗🌭

[@danieledwards1081]

Crikey!!! Don't think that diff oil has been changed for at least a half century 🤣🤣🤣 thick as!

[@ianatkinson8464]

😎👍

[@heavymetalmadman3533]

awesome vid. looking for MOT codes on welding frames in CAN. if you have ?

[@DEBOSSGARAGE]

Its a gray area. Most cops will have no idea what they are looking at. One mechanics shop won't safety it, another will. Its a 70 year old truck

[@heavymetalmadman3533]

@@DEBOSSGARAGE agreed

[@PeterHatch-mx7zc]

Great video thks c notch is that 3/16 steel

[@PeterHatch-mx7zc]

No worries don't want to answer questions

[@bobbywright2100]

But I can’t say I don’t like the results you get. I do like the channel

[@philipbarlow9013]

Did he at least try and get one with that bb gun? Or did he just use the scope as a broken binocular?

[@derrickodyes1934]

I can see a lo rider being useful in Canada with 10 months of winter....

[@dazzleyd]

Why not do a Watts linkage and move/notch the cross member

[@chloehennessey6813]

29:39 fast food

[@theblackguytv9891]

Please do that Merch Collab HHAHAHAHAHAHA "Above Average" lolol🤣😂🤣😂🤣

[@Tinman97301]

👍

[@chloehennessey6813]

Doods all bundled up in a hoodie and beanie and Rich is in a tshirt. Was it cold or is this just a style in California?

[@andrewkrose12]

When the sun wasn’t out, it was just above freezing. When the sun was out, it was perfect working weather. Legit toque wearing climate.

[@ktmcc4360]

Build a 460 Ford modern upgrades. I have a 120k single owner that has been sitting for 3 yrs inside and runs like new . Its in a bent frame but my new 97 is ready for up grades...help a guy get this to where its fun and reliable...

[@Fixingeverthingwithaengine567]

That's what she said.🤣👍

[@mcbarber5108]

I think you got some anti seize on me!

[@kentmckean6795]

All those "dinner on the hooves" wandering around must drive a meat lovers crazy!

[@andrewkrose12]

They are such a tease

[@fergusonhr]

Confusion with the knurel I'm 🤔

[@andrewkrose12]

I have a habit to reverse engineer and question everything. Just Andy being Andy. Dammit. See. Now I’m questioning you , about questions me , for questioning about the knurls.

[@bobbywright2100]

The old days from KZbin are gone

[@markharper4166]

Have a bambi burger for me.

[@Acestrex]

Commercials!!!!!!!!!!!!!!!!!🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯