Every C3 should have come factory with side pipes 👍🏻
@richgouette5 ай бұрын
I'm in the throes of installing Patriot H10160 pipes on my 74' L48. HUGE point of departure from the "norm" in my case, since I couldn't afford Side Exhaust headers.... I bought Hooker long tubes... Sooooo ended up buying that tube kit where you come off the (3")collector, and then so a 180 back toward the front, then a 90 pipe toward the sidepipe. The issue here is, there's way too much pipe for the short distance you need to get from the sidepipe, to the 90. ALSO, the size needs to go from 3" Chrome 90 sidepipe outlet, to the 90 2.5" pipe that comes with the hookup kit. Sooo I'm having to do two pipe cuts, and adapt 3" to 2.5" 1) I shaved some off the 90 pipe coming off the 180 pipe... and installed chrome adapter 3" ID to 2.5 ID 2) I'm about to shave off the Chrome 90 That's where I'm at. I haven't yet done any drilling, or hooking up to the frame yet... My goal here is to get the pipe as high as is possible , so it doesn't have that lame hanging too low/catch on everything in the road look.... PARTS: The adapters I bought were off Amazon: SSN Exhaust Pipe Reducer Component Adapter 2.25 Inch ID to 3.0 Inch ID Polished 304 Stainless Steel Universal ID 2.25" to ID 3.0" The pipe connect kit, I got this kit: "Speedway 2-1/2 Inch Side Pipe Exhaust Hook-Up Kit", but I got it for super cheap somewhere. I forget exactly now where... Headers: Hooker Headers Competition Header Part No. 2456HKR Feel free to ping me to ask questions, offer tips, etc.. RICH@GOUETTE.COM
@chevcam923 жыл бұрын
Love the sound even though the music drowns it out. Headman makes headers for this
@classiccorvetteguide91474 жыл бұрын
Major exhaust restriction with that connecting pipe from headers to side pipe. You need long tubes designed for that side pipe.
@kevinramey42263 жыл бұрын
which ones will work ?
@elainestamper38734 жыл бұрын
Like you’re video. For a good power increase swap the cam . A compcams 262h is a good one
@calebmac_cars4 жыл бұрын
I may have to look into this, been debating what route to go. Thanks!
@V8AmericanMuscleCar4 жыл бұрын
Nice ride and sounds sweet!
@calebmac_cars4 жыл бұрын
Thank you sir! Redoing the interior now, hopefully get a video up on that soon too.
@V8AmericanMuscleCar4 жыл бұрын
@@calebmac_cars you're welcome. I'll stay tuned.
@Rico-mo6uq4 жыл бұрын
Flowmaster has some sidepipes that fit your vette. Originally for Ford cobra. Keep the vids coming brother.
@calebmac_cars4 жыл бұрын
I might have to check that out. Thanks!
@idlewild19642 жыл бұрын
Caleb what size sidepipe kit did you install the 50" or 60"?
@OLSKOOLKINGZ5 жыл бұрын
Awesome content ready to see what’s next
@Killmonize4 жыл бұрын
Looks great. Love c3
@jayhays82679 ай бұрын
It looks like the side pipes are kinda low. Most of the ones I've seen are tucked up a bit higher.
@calebmac_cars9 ай бұрын
These tend to run a little lower
@jayhays82679 ай бұрын
I think when the pipes are hung from the slots in the frame that happens @@calebmac_cars
@jeffreygrinter17052 жыл бұрын
Hi, what length 50 or 60 inch. Thanks.
@jrodz8084 жыл бұрын
What shocks did you put in and how do you like them?
@calebmac_cars4 жыл бұрын
For now I went with standard KYB shocks (May upgrade later), The biggest improvement I've seen so far has been when I replaced the springs in the front and the rear leaf-spring with the composite one (I've got another video on that too). Overall the shocks are a huge improvement over the stock ones, mine were pretty much shot though.
@davidsprouse52343 жыл бұрын
What brand and model headers did you use?
@tomlipko4884 жыл бұрын
Please don't just use a floor jack to crawl under. Use some jack stands!!
@franklinnewill71084 жыл бұрын
What length of side pipes are they?
@kevinramey42263 жыл бұрын
51
@Okami4004 жыл бұрын
Those side pipes fit awkwardly, I dont know if I like them.
@Everything8172 жыл бұрын
You can make your own brackets and make them fit better and give another inch of ground clearance.