C4 corvette walk around 383 stroker motor (sold!)

[@catboi1188]

This Vette is very very well done 👍 take it over a new any day

[@tayzer22]

I have a bone stock 96 C4 and it's a road racer out of the box. Adding the 383 takes it to a whole new level. beautiful ride.

[@carsofsouthernmaryland4066]

There's no such thing as a road racer C4 unless it's a ZR1. That's why I am LS swapping mine.

[@Aqua350Lt1]

@@carsofsouthernmaryland4066lt1 and lt4 are fast

[@catboi1188]

383 can see 450hp dude ...smoke a ZR1 any day of the week and twice on Sunday

[@MaMa-ld3hw]

kzbin.info/www/bejne/jIaZo6yDlt-da9k kzbin.info/www/bejne/rJPScoRnaqZkeA kkzbin.info/www/bejne/ZnKpY2p_abd6ick

[@brandonlarose1052]

what surpirses me the most is that that engine bay is so clean but you havent trashed that god awful smog pump 10/10 either way

[@Oberbaumcorvette]

@@brandonlarose1052 at the time where I was working and storing the car mto did random spot checks right in front of my shop I had no choice also high flow catalytic converters 👍

[@brandonlarose1052]

@@Oberbaumcorvette geniuenly curious, 🤔did you still have it hooked up to somthing or was it just for show. It looked like you had headers that didnt have the air rails that the pumps hooked up to.

[@Oberbaumcorvette]

@@brandonlarose1052 no it was hooked up I bought a kit for the tubes that connect to heads that were tig welded in

[@brandonlarose1052]

@@Oberbaumcorvette ah cool!

[@lukeconverse6632]

Not a fan of c4 vettes but this one is really nice. The C4’s shoulda been made like this

[@steveo3947]

Super clean ride! Hope to get my 88 that sharp some day. She's not too far off!

[@catboi1188]

Sweet paint job 👍

[@MarkMadrigal-lf4ou]

Gorgeous!!!!

[@midgetmayo]

Greetings, nice to see my dream car wearing a license plate from the same province !

[@BigdaddyC4]

I have a 94 LT1. Let's just say that your video has lit a 🔥 under my 🐴. That hood is beautiful! Time to get that hot LT4 cam do some port and polishing build up the trans and add a nice converter. And I'm open to any other bolt-on performance tips you might have. Thanks for sharing your beautiful Corvette.

[@Oberbaumcorvette]

😂😂 thanks!! 🔥🔥

[@Oberbaumcorvette]

I didn’t do any bolt ons just ripped it all out went 383 tko 5 speed … crazy quick car now!

[@BigdaddyC4]

@@Oberbaumcorvette if you don't mind me asking. What she doing in 1/4? ultimately I would love to stroke the LT1. But I daily mine from time to time and the gas mileage I get right now is amazing! And I drive it like it's 1994 and I'm 17 with a new Vette 😁.

[@Oberbaumcorvette]

Never went to track just street fun 😂

[@BigdaddyC4]

@@Oberbaumcorvette awesome! Sounds like my kind of fun! I was just curious. Tomorrow is my 48th bday and my Lil bro has been picking on me with his SS Trailblazer so we're going to see where the ol Vette stands against that LS. He's has some head work done got a stage 2 cam headers and MagnaFlow exhaust a lil work on the trans but he won't say much just that he added a stall too. My only hope is he doesn't hook up,. His skills aren't quite on my level 😜. I'm looking forward to seeing you videos of your beautiful car I think I've seen all the ones you have posted already

[@Boostedimpact23]

Beautiful car!

[@sixsixtysixanhour]

this example is how a C4 should have been made from the factory...🏆

[@TheEmperorHyperion]

Blame California and the EPA.

[@jacksonfive5478]

Absolutely beautiful car luv it

[@docwillis1443]

Bad ass.

[@TheThemattyo1]

4 bolt main pump gas radical duration lift Come get you some ......

[@davidparisi4980]

YES SIR,,,,Done, right.Beautiful job,especially the analog gauges getting rid of the bullshit digital junk.Nice very nice.

[@Oberbaumcorvette]

Very very fast too😅

[@soulcapitalist6204]

It's beautiful. Is that a full hood or a scoup that was added?

[@Oberbaumcorvette]

Thanks it was a full hood by company I believe was called Toledo

[@crispy-dr8bx]

Just curious, did you do a muffler/cat delete or is it that loud with them still on?

[@Oberbaumcorvette]

Headers high flow cads flow master mufflers

[@Ashtoncars]

Great car. Where did you get the hood? I've been thinking about putting a cowl hood on my car after I get my 383 in

[@Oberbaumcorvette]

Toledo hoods but I don’t think they are around anymore 👍

[@TheHorseyGuy]

What cam and exhaust are you running? It sounds amazing!

[@Oberbaumcorvette]

Can’t remember which cam but exhaust was long tube headers and custom 3 inch exhaust with high flow cads and flow masters 💪💪

[@insidetheribcage1401]

Hey boss .. what's with the front nose looks different I like it

[@Oberbaumcorvette]

Hey I believe it was a company called Toledo hoods I don’t know if they exist anymore but it was a functioning one piece cowl hood

[@insidetheribcage1401]

Thanks for the inspiration

[@Dr_Exum]

How did you do dash/instrumentation conversion? Beautiful vette!

[@Oberbaumcorvette]

Bought a dash kit complete plug and play from ecklers many years ago not sure they still sell them

[@howardjeblim8292]

WHAT!!! Left the smog pump ON???😞

[@Oberbaumcorvette]

At the time I was working next to where they did MTO spot checks so I played it safe and kept all emissions in tack 😅

[@uio890138]

Nasty!

[@BrentWheeler-qi9ol]

Nice car ! What year and where did you get the wheels?

[@Oberbaumcorvette]

@@BrentWheeler-qi9ol 1986 …wheels were replicas from ebay I got them many years ago

[@BrentWheeler-qi9ol]

@@Oberbaumcorvette I have a 86 that im having a 383 stroker built and I’ve been trying to find wheels that look good . I can find the ZR1 replicas on eBay but they say the won’t fit due to the difference in offset. Did you have any fitment issues? I’m pretty sure the fronts will need spacers and I’m assuming that your wheels were 17x9.5 front and 17x11 rear.

[@Oberbaumcorvette]

@@BrentWheeler-qi9ol at the time I picked up those wheels they had replica sets that were made for the 86 It didn’t require any spacers sorry I don’t remember what offset they were but I do remember they were 9.5 front 11 rear

[@tomkruz5765]

What was the price of this beauty?

[@RPDSfinest]

I’m sure you have a good reason, but why go carb over EFI?

[@Oberbaumcorvette]

My intention was to but $$$ was adding up 😂

[@RPDSfinest]

@@Oberbaumcorvette I love the more traditional muscle car spin with the cowled hood, gauges, carbs and 315s on the rear I’m guessing? Awesome build man enjoy

[@Oberbaumcorvette]

Yes 315 ❤

[@UBeesh10]

I hate the c4. I love this one though.

[@Oberbaumcorvette]

It’s hard to hate when it sounds soooo good 👍 😂

[@rotorblade9508]

what lbs injectors does she run?

[@Oberbaumcorvette]

It’s a 750 Holley carburetor 😊

[@uio890138]

Sounds nasty!