I know not permanently mounted but be mindful of the rotor direction and the calipers with only 1 bleeder those need to point up. Nice setup dont listen to the negativity. Love the build.
@eternalflame77102 жыл бұрын
What? Lmao 🤣 no they do not go play with the rice burners you have no idea wtf your talking about when it comes to disc conversions on muscle cars
@eternalflame77102 жыл бұрын
This is not some pos new challenger or charger . 🤦♂️ go away with your new import car
@PA.SS1LE2 жыл бұрын
@@eternalflame7710 there is no need for this.
@nflynn__x2 жыл бұрын
Been a long time since you posted this but would you happen to have a link? I can’t find a full kit with the front back and the booster/master cylinder
@ItzTheDay10 ай бұрын
Correction. They are not C5 calipers, they are calipers from a 2000 Silverado. The C5 kit CPP sells also uses Silverado calipers, but they come with a custom spindle that uses C5 hubs.
@MyrtleBchsweeper4 жыл бұрын
The build is looking great, can’t wait to see it on the road...
@Lethalgarage4 жыл бұрын
You and me both!
@jdt0494 жыл бұрын
You will be fine with a 18 inch wheel on that, I run 18's with exact same set up
@shaunmccuin59544 жыл бұрын
Closer and closer everyday. Still love that color. What was it again?
@pitcuz2 жыл бұрын
Great video, I am building a 1980 Trans am protouring build. I also purchased the CPP big brake conversion for the front. I see that you a using Rocket Attack series wheels. What size and backspacing are you running up front? Well it started out as an 80 but I'm converting it to a 70-73 with a flush fit small back glass and front windshield. When I watched a video where you said you were at a 1 year and 4 days into the build, I was like shiiiiiitttt that's awesome. I am working on the back half of the car fabricating a rear diverter, extending the lower part of the rear quarters building a metal bumper and a metal rear spoiler and I am probably like 2 years just in that, so awesome looking work for such a short time. Thanks, for taking time to post your videos.
@SuperchargedCamaroGuy2 жыл бұрын
What’s the part number for that kit
@KazinM Жыл бұрын
Interesting how people buy this kit when they can get the wilwood 6 piston billet aluminum kits for like a couple hundred more (1200 to 1400 depending if you go 4 or 6 piston)
@Lethalgarage Жыл бұрын
That doesn’t include the booster, but when I got my kit it was $800ish for front and rears with the spindle and booster.
@KazinM Жыл бұрын
@Lethalgarage ooh my bad didn't know it came with the rears too. Just the fronts for wilwoods are like 12 to 1400. This is a better deal 😄
@ericsandhu62534 жыл бұрын
Can’t wait to see your wheel set up you choose to go with!
@wilsoncs39802 жыл бұрын
Nice Airborne Flag Brother, AATW!
@209jjones2 жыл бұрын
Do you like the front spoiler? And if you don't mind me asking where did you buy it from.
@onegative88872 жыл бұрын
Never heard of a front and rear big brake upgrade for under 1000.00. Where’s the link and parts kit part number
@tbrad1104 жыл бұрын
My 79 is the same color. Car looks great man
@garynoble15594 жыл бұрын
What hub did you use? Did the kit come with it?
@dannyoliveira47874 жыл бұрын
Great video Matt, Thanks
@getgetoutout2 жыл бұрын
I also used this kit. I had to throw away the rotor because the pilot hole was too big for the hub. Watch here. (kzbin.info/www/bejne/iHu9k4yvmpudaaM) CPP WOULD NOT replace them. Then both pistons in the 'rebuilt' C5 calipers leaked. JUNK. I am sure that the C5 hubs were the cheapest Chinese junk as well. THEN the CPP Spindle that allows you to hang C5 brakes leaves your front a FULL (1") wider than stock. In other words, your front tires are one inch further apart out than your rear tires. CPP claims in their literature that they do not. It is noticeable. I measured it, as did my frame and alignment guy.
@BumbleBee-kg5ig4 жыл бұрын
I think you should powder coat them red while they are off.
@BobRochon4 жыл бұрын
what spindles do you use to mount the front hubs and rotors ? oh and nice build...
@markkalkwarf45203 жыл бұрын
That spindle is a CPP c5 for 2nd gen camaro.
@MA276963 жыл бұрын
Do you have a part number for the kit?
@skozoticschi9 ай бұрын
So no part number huh
@SkillzManifest2 жыл бұрын
With this kit are you still able to Mount 15in rim
@teoduloacosta57012 жыл бұрын
That's the same question I have, don't want to replace my 15 in rallys..