C6610 error Kyocera Taskalfa 3501i 4501i 5501i | Step by Step Solutions | Cleaning

[@macor285]

@Max1u, Thank you for correcting my previous uploaded video of C6610 error.

[@max1uYT]

Very Good Video :) I also remove the diodes from the housing and clean them :D What liquids do you use to clean the sensor?

[@macor285]

@@max1uYT use co contact cleaner

[@hamadakasem8781]

Great dear 👌

[@macor285]

Thanks...

[@alekskruk8875]

Good afternoon. Error C6950 popped up in Kyocera TASKalfa 4551ci KX, nothing can be done, control is impossible, the picture shows a disconnection from the network, it does not help. Have you encountered a similar problem?

[@JohnnykNg]

Do you have better ideas how to repair the fuse unit for Kyocera 4002i .code 6600 and code 6670 ,(just like you say #2 THE BELT ROTATION)THANK YOU for responds

[@macor285]

www.copytechnet.com/forums/kyocera-mita-copystar/157554-5002i-c6600.html...check...

[@tiuakira]

This is caused by toner that has smaller particles than normal, causing the toner particles to clump on the sensor... use a good quality toner and you won't have this problem anymore.

[@tiuakira]

Olha a quantidade de sujeira de toner....

[@macor285]

Thanks.

[@HruruFjfuyg]

السلام عليكم سيدي ممكن تساعديني في حل مشكلة مكنه تصوير كيوسيرا 4501 العداد عالي جدا ممكن فيديو امسح العداد كلوا اخلي التوتل كلو اصفار واشكر حضرتك ارجو الرد والمساعد

[@ZeeshanMehmood-jw1bq]

Kyocera 3500i 4201 paper jam

[@macor285]

Clean paper sensors. Check pickup roller/ feed roller.

[@abdelnasersleem9550]

Error C6400 4501i

[@macor285]

Defective connector cable or poor contact in the connector. - Reinsert the connector. Also check for continuity within the connector cable. If none,replace the cable. Fuser heater PWB (YC29) and feed PWB 1 (YC27) Defective fuser heater PWB. - Replace the fuser heater PWB and check for correct operation. courtesy: kyocera service manual