hp officejet 7612 printhead cleaning

how to clean printhead hp 7610 7612.
manually cleaning the printhead on the hp Officejet 7612 printer.
hp Officejet 7612 printhead cleaning.
hp Officejet 7612 printhead error.
hp Officejet 7612 printheads missing.
hp Officejet 7610 missing or failed printhead.
hp Officejet 7612 missing or failed printhead.
hp 7612 ink system failure.
hp Officejet 7510 7612 printhead cleaning.
hp printhead missing.
OfficeJet pro 8610.
pro 8600 printhead cleaning.
pro 8600 disassemblies.
6500 ink system failure.
hp Officejet 6700 premium 7610.
hp Officejet pro 8620.
pro 6830 printhead removal.
hp Officejet 7612 setup.
hp 8600 printer reset.
WEBSITE: maintinance-cen...
/ howtofix92 .
[e-mail]
How to Fix
~-~~-~~~-~~-~
Please watch: "How to Unlock Oppo 5G CPE T2 Router Like a Pro!"
• How to Unlock Oppo 5G ...
~-~~-~~~-~~-~

[@bradleyganz4118]

My printer would not print pink and/or reds, So I cleaned my Printhead fo the Magenta ink cartridge using this video as a guide and now it prints Pinks and Reds. Thank you for making this video!!

[@Samdg123]

Thank you for posting. Great help since I also have the printhead missing error. I like you video, but I would prefer spoken instructions over this music 😁

[@ReubenMRU]

Thank you so much! Helped me loads today! Printer started working again after doing as per your instructions!

[@HTF]

+ReubenMRU Welcome

[@rbryngo]

This is the most irritating video without explanations and jerking of the camera. Never identifying tools, procedures and fluid used. Bad, bad video and worthless.

[@sailingnstuff]

I don't advise doing this yourself. I've taken apart many things from electronics to cars. My printer would still print black but the color was faded and off color. Because it was so clogged the cleaning fluid didn't go through so I pushed harder on the syringe and I popped the thin plastic cover over the reservoir tank. I ordered a refurbished one and installed it and got error message 'print head missing or damaged'. Found that someone had tried to'fix' it by soldering over the gold contacts shorting each pair. Seller sent me another one, no soldering, and still same error message. Now shopping for a new printer. It won't be a HP though.

[@MrBloodhaste]

what liquid solution you used for cleaning ..water.

[@jaydensimmons4637]

It has been used several times and loved.

[@proyectah6336]

I did not tried it as yet but seems to have technical sense, thank you.

[@dspmandavid]

Thanks for posting this video. Very useful, as I have the "print head missing" message, repeatedly.

[@sailingnstuff]

You should caution people not to put too much pressure on the syringe. Mine was so clogged that the clear plastic cover on the little tanks is leaking. May have already been leaking but I think too much pressure did it. I tried a piece of packing tape on top but it wasn't sticky enough.

[@elvirapeduto101]

GRAZIE Hai salvato anche me !!!

[@gemstonemylove723]

Hp officejet pigment ink s are oil based pigment inks, so don't use wateror distrill watwr, special clean solutions, or ip solutions easy to evabration must need after clean use fan dry or some time to give evabration after on printer 👍

[@queenainne]

Is it water that you use?

[@DawnMB57]

Also, it looks like you are going in the right direction instead of left to remove them. Am I seeing correctly?

[@arnoldperez4736]

Does printhead need to be primed with ink before installation?

[@huchihaitachi2994]

Merci vous m'avez sauvé

[@MuhammadAshraf-rl5vi]

what liquid solution you used for cleaning ..water. Please tell me

[@HTF]

yes

[@remifrancois1694]

@@HTF only water ? alcohol it's good or not ?

[@ahmedhieba4495]

Dear What type of liquid you used it Thanks

[@jkmjkm3365]

use normal water to cleaning ?

[@gilleslefebvre5426]

100% Merci mon ami.!

[@beckywhatley6675]

In using this method, on one of my 'ports', I heard a 'pop'. Did I damage the bladder by putting too much pressure?

[@sailingnstuff]

Probably. I think I did the same thing. Mine were so clogged that when I put pressure on the syringe it loosened or split the clear tape on the top of the small tanks and cleaning fluid is now coming out of those.

[@COMUNIDADAGUSTINIANADELAMORDEC]

Hola de los tres cables de conexión, el más estrecho se desconecto de la impresora y no encuentro donde tengo que conectarlo. Podrías ayudarme por favor? Gracias

[@robertstephens3601]

Hi, Thanks for posting this video! Can I ask - what is the cleaning fluid being used (distilled H2O or solvent? What is the size of the tube used on the end of the syringe? Where can I purchase the syringe/tube? Thanks!

[@HTF]

I am using mineral water for cleaning.

[@HTF]

the end of the syringe I made from the wire heat sleeve.

[@robertstephens3601]

Thanks!

[@HTF]

welcome. please like and share my videos

[@ArkMedic1]

How to Fix The wire heat sleeve? Can use distilled water to clean it as well? What temperature does it need to be? Room temperature, warm, or does it matter? Also, where the ink system rests when not in use, all the way to the right of the printer on my 7610, there is black ink underneath the ink system on the printer. Is that supposed to be there? Should I clean and off?

[@kriley9386]

After all this, the HP still didn’t work. So I trashed it and bought a new wide paper printer.

[@sheilacaldon2371]

Good video, thanks! What was HP thinking...? LOL

[@pfranco1226]

Grazie. Hai perfettamente ragione. Ciao

[@mitrasolusiproperti6476]

is the error printhead missing or still remain?

[@paulogar]

How fix the flat cable encoder?

[@AMITKUMARSINGH1503]

After cleaning the cartridge now carriage jam error message showing.. carriage hits the left side harder . How to fix this?

[@RolandReichmann]

Look if the ribbon with the points ist on the right position backside of the printhead. This is for positioning

[@oliverngu3248]

what is the liquid used????

[@melissaburns622]

cleaning is a stop gap measure and doesn't work for long. I KNOW I'VE TRIED IT SEVERAL TIMES!!!!!!

[@user-no2zf1jc7t]

hi i follow the steps，but the printer shows ink system failure

[@DawnMB57]

Where can I find an allen wrench small enough to remove these screws?

[@robertstephens3601]

Actually, it's a Torx bit. I use them a lot but not this size. I found a set of smaller Torx bits both on Amazon and at my local hardware store.

[@vedputeea8126]

it is sold as star wrench key.sold in sets in any hardware shop.take the small ones only if possible

[@khankhan-jb3mp]

my epsonT60 slow printing problem after 4 to 5 prints. can you help me ?

[@marcyzanna78]

I tried to do in this way. I didn't solve my problem and now I've got another problem.

[@prabuk5694]

How can I solve the error message of this printer "ink cartridge carriage stalled"?

[@prabuk5694]

Also catridge moving slowly and hits on the left hand side heavily..... Suggest the solution...

[@BoomBoxPL1]

@@prabuk5694 I Have the same problem. Have you fixed that?

[@mazzaferropaolino9351]

era molto faticoso. ma dopotutto, ok. grazie. GRAZIE ......! ( distilled water 50% + 50% ammonia )

[@pfranco1226]

ciao, scusami ho una hp7612 ma non ho capito bene cosa si usa par la pulizia delle testine, quale liquido? Grazie mille

[@mazzaferropaolino9351]

@@pfranco1226 acqua distillata ed un poco di ammoniaca, ma dopo la pulizia è meglio usare solo cartucce originali. ( Comunque questa stampante è una porcheria ).

[@mazzaferropaolino9351]

@@pfranco1226 Ne ho riparato 3 , di cui 2 sono andate bene solo con cartucce originali, l' altra preferisco buttarla perche una testina nuova cossa quasi 80 euro, e le cartucce originali cosano intorno ai 75 €. Ci ricompro una stampante nuova. Qusto modello non lo vendo piu'

[@Amanda-cv7vn]

So mine has a broken hinge

[@cm7884]

Do I turn off first?

[@kimnilsson7501]

If you turn it off, the ink-craddle goes to the right and is locked. I pulled the plug and it stays visible.Right now I'm gonna try to clean up our printer. Will soon see the outcome…. Happy it if works.

[@geninetenbroeck636]

Um, you forgot to put back that plastic cover... XD

[@juniortsunami6316]

How to Change the HP Officejet 7612 Print Car?

[@wandjisilvere4741]

How to fix code error B8B5DBB4 for HP officejet 7510

[@jkbsdasf]

Didn’t work. In the garbage it goes

[@aljelova.]

It doesn't work!!! it seems a fake procedure... don't do it anymore!!

[@1984Nupe]

This music should be DELETED!!!

[@jv-dz2pj]

this printer is a piece of junk

[@Thebest.786]

Fucking, not problem solving

[@melissaburns622]

THE SPRINGS BEING GONE IS NO HELP TO ME!!!! TAKE IT OFF YOU TUBE.