CA Compliant Rifles

Running a rifle in Cali? Justin and Sam break down some CA Compliant Rifles to show you the variations you can run in CA. Yes, we know it sucks, but, better to see what you can and can't do. We touch on fin grips, Hellfighter kit, AR Maglock, Comp Mag, and Juggernauts Grip.
Here are some links to featured products in the video:
Juggernaut Grip
riflesupply.co...
AR-Maglock
riflesupply.co...
Comp Mag
riflesupply.co...
Featureless Fin Grip
riflesupply.co...
Hellfighter Kit
riflesupply.co...

[@declineofthewest.]

As a Georgian, this is absolute madness. My God

[@rememberthefallen1970]

Georgians voted Democrat on the Governor. Soon you will have this madness knocking at your door

[@IanArizpeArroyo]

all the guns here are neutered and twice as expensive

[@fastdude2002]

Democrats want to make this law for the entire country so vote accordingly if you don’t want this coming to a state near you….

[@bertkilborne6464]

As a Californian - You're Right

[@hnfiiinc5993]

We are sorry for having laws that butcher fine machine systems into a Frankenstein of ineffective safety. This is why I won’t buy an AR in CA. 10 round mag, pistol grip fins, loading changes, etc. damn shame. Practically a 10-shot hunting rifle with worse features and extra heft for nothing.

[@aj897]

All these laws are funny to me, it still shoots the same cartridge regardless of the grip shape or stock position lol.

[@Mecryte]

The point of the laws is to be such a frustrating mess that no-one wants to bother.

[@maxtm3000]

@@Mecryte yeah 100%, they want you to say "nvm I wont get a rifle then" because of the hassle

[@PandaClanGaming]

Lmao the whispering in the backround when hes going over the juggernaut fixed mag

[@riflesupply]

Justin was talking to his dog 🤦🏻‍♂️🤣

[@FreedomKat]

Thats what I was thinking hahahahaha@@riflesupply

[@phaze2yogi400]

LMAO....

[@Hollerboy931]

I was wondering wth that was I thought someone was talking to there kid.

[@Alckee6904]

love the whisper honestly if gives your videos so much character. Keep it up!@@riflesupply

[@Mus0846]

Thanks guys for showing us a lot of different options for California compliant AR’s .

[@chunkafunk81]

RIGHT! :)

[@Roscoeverdin5469]

Perhaps the best video made on CA compliance options without the politics and just going over our CA work-arounds. Thank you!

[@StrangersIteDomum]

All ca citizens should appreciate their US constitution and the CA politics that are infringing them.

[@yoellopez82]

They should have so the residents know they are getting played.

[@xxxbigbxxx]

We need stop making work arounds and just refuse to comply. Insanely unconstitutional, unsafe, and rediculous. Let's make a rifle with a weird grip angle hard to hold and aim, so you miss your target. Let's add a bunch of steps to load /reload so when adrenaline is rushing through your system, you can't operate the weapon and you become a victim.

[@rickluttrell5529]

Well. Kind of stuck regarding to buying CA compliant rifles. But agree. No need to continue to comply once it arrives. Just say no.

[@carlwalther136]

Victims is exactly what the democrats want. The more victims they have, the more power they get.

[@markduccini]

So you believe that people that are unwilling to follow rules and laws should be able to purchase what ever firearms they want🤔

[@SupergiantgeckosLLC]

What’s legal in 1/50 states is all 50 good

[@PhilipPerez-PLC]

It's difficult to refuse to comply, when the manufacturers don't/won't make the product available for the residents to be in non-compliance with. And even if a CA resident drives out-of-state to purchase a non-CA-compliant firearm, the FFL won't sell to a CA resident.

[@RenoMay]

If I can’t reach the safety with my thumb I do a reach under with my shooting hand

[@riflesupply]

Reach unders are only for Friday Nights 🤣🤣🤣

[@user-eo3jm5ew4z]

😂

[@emiker33]

This was insanely informative for someone in the market for a rifle in So Cal. Thank you . Will likely stop by.

[@rng_clapz4359]

Me watching this from Florida mind boggled 😮

[@elicash315]

Me too bro. Complete nonsense.

[@ben83724]

thinking of moving from california only thing stopping me is employment

[@tdo7125]

I got 30 round mags during freedom week and did not realized it can only be run on a featureless. First time I heard of this

[@ghost8487]

Pretty sure it just ain't tru. Because if you use them how can you prove they're freedom week mags? They'll confiscate them anyway. Regardless if they charge you for a crime or not

[@PanditaP]

Yeah I didn’t know for a long time either.

[@thomasreyes5782]

Hey sorry new gun guy here. What is freedom week? Is it a yearly thing where people aren’t limited to what mags they can buy?

[@lel6727]

@@thomasreyes5782from what i know it happened a couple years ago and it was a short period of time where CA residents were allowed to purchase higher capacity magazines

[@bhba2847]

@@thomasreyes5782freedom week was a period I believe 3 years ago where a judge ruled the magazine capacity limit was unconstitutional, so for a brief period of time you were allowed to purchase legal 30 round capacity magazine in California.

[@haikarate3876]

Fun fact....Armalite, is an American small arms engineering company, formed in the early 1950s, in Hollywood, California. Chief designer was Eugene Stoner.

[@rmacdizzlee]

As a beginner best video to watch and help decide.

[@cornpop8570]

It's not worth getting a rifle in California you are screwed.

[@kimbilinkimbilin]

These laws are unconstitutional

[@riflesupply]

Amen to that

[@clip619]

The constitution is as good as the us dollar... destroyed by jews

[@dontkillyourkat1733]

Your whole lifestyle is unconstitutional. 😮

[@LocaICommenter]

So unsigma

[@genegomez3402]

I got the juggernaut hellfire along with the hogue freedom fighter that way I could get my bolt to lock back. It’s great. Took some adjusting of the freedom fighter when you first get it but once you get the hole drilled to the right spot it works amazing and never had an issue with either. Highly recommend for anyone forced to do this shit in Ca :)

[@mk3driftmotion]

I have several AR rifles with the Juggernaut grip, 10rd mags, muzzle brake, and 16" (or longer) barrels. It's actually very comfortable to hold and shoot with the Juggernaut grip and their backplate, I really don't mind it at all. The fin grip is horrible to me, I don't feel like a have a good hold on my weapon with it, and that is dangerous. I bought a bunch of parts from Rifle Supply in the last 4 years, they are one of the best places in SoCal to get parts and accessories for AR builds. Everyone there is helpful and nice to deal with.

[@meisong0717]

California crack down on criminals: ☹✋ California crack down on law abiding citizens: 👈😃

[@LocaICommenter]

Indeed. These liberals are so overdramatic.

[@BrandonMeyer1641]

In New York we have the option of a permanently fixed 10 round mag and can keep adjustable stock and pistol grip. I’ve found that the MA loader is a good option for the setup. It’s essentially a stripper clip for the AR 15. Bolt locks open, insert MA Loader and feed rounds in, remove MA loader and bolt is seamlessly dropped and round loaded into chamber. Have had 0 reliability issues. Best way to use it is to keep support hand on gun and pressed into shoulder and use firing hand to load. However, in all honesty, I think the best option for compliance states is a rifle that was designed from the onset to be featureless. Items that come to mind are mini 14, that new sig thing, and the like. You get better ergos and manual of arms as compared to a chopped up compliance ar as well as removable magazines which we know gives you nice options down the road. As long as law makers are dumb to the fact, they are the best option imo.

[@triuneicthus3524]

From what I've watched and read, you cant clear malfunctions with the Juggernaut unless you completely break open the upper and lower receiver, but with the AR Maglock you can when the upper and lower are closed. Huge difference.

[@garryneidig2511]

I'm in CA. I use the Thorsen fixed stock with a rubber hand grip added to much improve the feel. It takes a bit of lube to get it over that awful plastic handle but it works so much better

[@Pulverized]

Springfield Saint victor featureless is the best way to go living in CA I’m okay with my fixed stock and fin grip

[@PeterRoos]

I'm in California, instead of a fin grip you can also have a Thorsden Stock with a featureless rifle. Much better grip. DSI makes fully compliant CA rifles if you are new to the AR thing and you are not sure about the legalities. I have one of their rifles, works just fine.

[@fjbyedone1731]

My go to set up for HD is the Strike Megafin which has a thumb perch for a more secure grip, while still able to run standard mags.

[@riflesupply]

That's a nice setup

[@chrisfrank8413]

Get a Monsterman Grip. Those things rule, pin your stock, get a compensator, your good to go! Got my Freedom week mags. Holosun dot and 5x flip magy. It's 90% man, really good!

[@kosherlechon]

Sparrow dynamics makes a solid CA grip, finger stop, muzzle break and ambi fire selector. Great company trying to keep the 2A life alive!

[@riflesupply]

we are are going to do a part 2 and they will be included

[@davidfields5627]

If you run dry with the help fighter kit, you will have to chamber the first round when you insert the next mag. If there is a hold open and you’re using it, then you have to send the bolt home before breaking it open and you still have to chamber the first round of the mag. If you have a double feed, it takes considerably longer to clear without being able to drop the mag with the bolt stuck half way.

[@TheTongMan]

these rifles are so unsafe...severely handicapping yourself and limiting your ammo makes you a hazard.

[@riflesupply]

Unsafe, No! Ridiculous? YES! 🤣

[@NeverStop909]

They are unsafe because that’s not the way they were designed originally

[@Ghost05900]

Welcome to California 🎉

[@codeinecowboy8607]

It’s like firing a 2x4

[@egld2020]

@@riflesupplyunsafe YES !

[@phatmanrx7]

We just need the Supreme Court to do the right thing, uphold the constitution, and we will no longer need this video. 🙏🏼

[@greglovett2269]

Can’t stop laughing over the steps😅 love it

[@riflesupply]

🤣🤣🤣

[@getlost3346]

X-california here. Best is the Saiga AK with no pistol grip. Comes in 223 and 7.62. For AR15 dont bother with Maglock, get the featureless slant grips.

[@morradovr6]

Vids of lightweight AR builds, pros/cons, where you can cut weight, and adding weights. Adjustable Blocks shootout, Adjustable Gas Key vs Block. Muzzle breaks vs Flash hider shootout Best chambering for AR-15 & AR-10, then compare and best uses, ballistics/distance, cost, parts availability. Ammunition versus test of trending calibers... HTH

[@therainydayshooter2973]

The best maglock in my experience is the hogue freedom fighter kit paired with the armaglock kingpin or the hell fighter pin.

[@Conservingtheworld]

Living in California is like having over protective parents that don’t allow you to have any fun toys

[@pergaminopoo]

Worse they make you go to bed at 6pm

[@LocaICommenter]

And they hit you every night for fun before bed.

[@markjacksonmusic21]

Just got my sig spear LT. What mag Lock version would fit best? Do you need pinned stock with it as well? This video is so helpful!!

[@crush3095]

I just hate having rifles in my room that I can't USE unless I go to the range I've been there feels dumb, zeroing an AK at the range knowing full well I can't even hunt with it I sold all of my rifles except for a heavy ass 300prc that I hunt with, bolt action, zero desire for a pistol grip, horizontal pressure needed for accuracy but I've been eyeing a 300WM AR for a year.. will probably still end up with a long range hunting set up; but it was great to see some of these options

[@captainkush8423]

Great video!! i just need to say this we the people in California never voted for these politicians to pass these restrictions, saying election interference is a thing but laughing and talking down on Ca and it's people is hypocritical. we're all Americans and whats stopping the government from trying to do this to every gun owner in the future! we've seen the atf try pulling all types of bs to our guns all over the Us

[@NissanSkylineVR30]

As a Californian, I feel like California is that one teacher that makes you do that one unnecessary thing because they want you to for just cause. Honestly - this feature does not change the AR at all. It really just creates a "hassle" to slow down your reload by 1-2 seconds for noobs and less than a second for someone that is trained.

[@ronblitz]

I think it’s more about the fact that they illegally do this. Not so much what they do.

[@NissanSkylineVR30]

@@ronblitz They want to and its illegal. Both can be true.

[@LocaICommenter]

welcome to California: Rules, regulations and tour guides: 1: housing is expensive as shi- 2: gun laws are absurd 3: half the civilians are over dramatic 4: civilians believe that they are the king/queen of the world 5: civilians think abortion is ok 6: civilians think it’s ok for people from a different country cross the border illegally 7: the civilians think guns are only made for killing others and not recreational use 8: civilians take the constitution as a joke 9: streets are littered with tents and trash Am I missing anything?

[@andresanchez948]

​@@LocaICommenterThe exception that proves the absurdity of their backwards thinking... our riding law that allows us to do lane splitting (which I love, but making a point). One would think they would deem that "unsafe" as well. Besides the weather, it's literally the only redeeming quality that keeps me from uprooting.

[@michaelbanasiak3015]

Great video. I have to come and see you guys for the Compmag.

[@lvrrylxrd232]

shoutout to akthumbgrips for the finned pistol grips that gives you even more perch for your thumb, super comfortable and i even modified a strike industries safety selector and flipped it upside down so its easier to flick the selector with the thumb

[@jerrys5764]

Can we convert an AR from California compliant (maglock variation) to California compliant feature less( fin grip, juggernaut grip)? Or is that considered illegal

[@riflesupply]

Yes you can

[@pergaminopoo]

Crazy how all these 2A people are complying with all these unconstitutional rules

[@jerrys5764]

Better to go feature less even with fin grip. The ugly fin grip is removable and the mag release operation remains!! That’s the most important thing to me. All I care about is semi auto/ mag fed weapon to survive a fight. Therefore original mag release operation is the most important. If the world becomes lawless then it won’t be illegal to remove the ugly fin grip 😅

[@riflesupply]

There ya go!

[@kobeh6185]

I've perfected my CA setup, reference this boys. I've got a Gen 4 ARMaglock with the Kingpin to replace the rear pin. I'll address how I fixed its issues, the criticisms of it in this video are correct, but I have rectified them and it is very much worth it. But first, I'll explain why maglock rifles are usually superior. Firstly, fin grips and fixed stocks are inflexible, the fin grip in particular but broadly the fearureless grips as a whole make the rifle harder to shoulder or manuever with just the firing hand. This makes reloading more difficult as well as a number of other tasks. This only gets more difficult the more attachements or weight you have on the rifle, god forbid you have a quadrail. Retaining the pistol grip is worth it, just keep reading. You NEED to have a flashlight on a defensive rifle. Thats weight out front. If u want a do it all, even night vision, thats even more frontal weight. That weight is really gon a add up and that fin grip is really gonna be a pain, and its not quick to take on and off compared to the Gen4 Maglock. The benefit of the gen 4 maglock is that you can retain your bolt release, and not fundamentally change the manual of arms too much. To fix it, firstly, I found a screw with a larger head that fits a larger allen key, but has the same threads. I shaved down the threads to the correct length, and replaced the tiny set screw. This tiny one has a very bad habit of stripping. To prevent the button from walking off the rod, I shaved down the part of the rod the screw touches so that it would be flat. A flat screw end on a flat surface slips a whole lot less. The wider head and larger allen key allow you to tighten it much tighter without stripping. Make sure to shave the pin only a little bit, and to shave down where the screw touches it *as well as* everything to the left of where the screw touches as well. This is because when you go *out of state* you can use your allen key to simply adjust the maglock to a more spaced position, allowing you to release the magazine without splitting the recievers. I must stress you only do this *out of state*. Also, make sure youre shaving the right part of the pin, which is facing the screw when the maglock is assembled, (90degrees from vertical, facing down, in other words, the bottom side of the pin) Shaving the pin to have a flat surface for the screw also gives the benefit of not letting the button rotate so much, meaning the button wont miss the gap in the reciever when the kingpin splits it as often. Another issue the ARmaglock has is that when the bolt is locked to the rear, the recievers don't split apart far enough for the mag lock to slip into the crack and release the magazine (Unlike when the bolt is forward). To fix this, I shaved down the "pokey bit" that goes into the gap into a sharper point. *Critically* this is only a subtle change, do not shave off any length, just narrow its width so it can fit into a slightly more narrow crack. It should still lock the magazine (by not poking into the reviever gap) when the recievers are closed. I also shaved the two recievers slightly when the maglock slips between, so it has a sort of "ramp" to get into the crack. This is especially helpful when the bolt is to the rear and so the crack in the recievers is very small. However. Dont overdo it, the change is subtle. The maglock still needs to function as it was designed. The kingpin is a good design as well, as it can be removed without tools, and installed with just a sharp object that I know you have, such as a pocket knife. The kingpin is *very necessary* for this build to work. The whole thing relies on its ability to split the recievers quickly. Ive got rail covers, IR equipment, a large and powerful flashlight, VFG, whatever muzzle device I want, and importantly for CA, a pistol grip, all the while being fully compliant. Furthermore, I can change my magazine in mere seconds. When I go *out of state*, I can simply get my allen key, loosen the button screw and scoot the buttons a few millimeters out on the rod, retighten it, and use the button as if it were a normal magazine release. No reciever splitting necessary. (Remember this is *out of state* ) In my pistol grip, I carry a spare maglock set, just in case this one were to walk out and fall off. However, with my modifications, this has yet to happen despite some pretty rough use. You get basically a fully functional rifle, but legally when you're *in state* and the maglock is *on* , you've got to use 10 (or 5) round magazines, even if you legally possess standard capacity or high capacity magazines. When you're *out of state* , like I said, just adjust that maglock a few milimeters and you have what is baaically a fully functional rifle that will take any magazine. One more note: sometimes you wont be able to release the magazine with the bolt to the rear anyway, and on that occasion, i have a BadLever to help. I can release the bolt and pin the bolt rearward with the firing hand, allowing my support hand much more freedom to manipulate magazines and the charging handle. I would strongly recommend a badlever or other device that allows the firing hand to drop or pin the bolt. Feel free to comment questions, I'll probably answer them. Featureless isnt bad, tho, especially if it's not a defensive/SHTF rifle with a bunch of shit on it.

[@DavidSmith-iz6qj]

You guys rule. I haven’t been coming by lately because I see how slammed you all get. 😂 take care fam, good video

[@user-wg5lj4ch2l]

I have a grandfathered in LMT Defender DI Build with no FCU, so I have 30 Rds, I also has the Juggernaut Break open, with those special parts to make it fast, then I have a Saga 7.62 x 39 16 inch with those 30 rounders lol, also a mini 14 18 inch barrel, with NO FCU, so I can run the nice mags. also have speed loaders for the fixed mags

[@LABAMA15]

So first gun everything normal beside fully gripping it , second is all bells and whistle beside taking out the mag

[@darrent1000]

The AR-15 F.N.G.R. Fixed mag kit is by far the best solution I see for this BS CA compliance. I am glad that the gun store owner recommended the kit to me when I bought my first AR15

[@MrZola1234]

Great topic. I want a competition pcc. What is the best left handed option??? On the featureless, can you get ambi mag drop? Can you get the finn reversed so it fits a lefty better? Can you reverse the maglock or jagurnaut king pin for speedy left hand use???

[@davidfaria6194]

I’m with you 200%. I have no problems with all my featureless rifles.

[@jtonyf4978]

I’m in CA. I want to get into 3 gun/multigun competitions instead of just my pistol and bolt gun competitions to round out my skillset. I’m leaning towards a featureless AR15 in 556 setup. What would be 2nd best? Sig’s ranch rifle they just came out with …? interesting but $$$$! The multigun competition folks none use the fixed mag setup ever on their AR15 that i can find. Trying to wrap my head around this before doing an AR build for competition use.

[@shanekump5228]

So you are saying that California is NOT a free state?

[@riflesupply]

That's pretty much what we are saying lol

[@victorparker308]

60+ native Californian here. It used to be a free fairly conservative state. Definitely NOT a free state today & rapidly progressing towards slave state status.

[@shuffeler94t]

Thanks for the options lad . Stupid California we can’t have flash hiders but stores would sale you the uppers with the flash hider on it

[@anthonysholars4782]

Can you do all ca compliant rifles? example mini 14 etc

[@OrangeBlossom4x4]

Thought that was Raahague's. Awesome vid, comprehensive for the different compliant variations. Building a featureless with juggernaut grip. Subbed

[@Irishhoodlem]

had 2 bullets get stuck in juggernaut rifle both froze the bolt carrier group . dudes that work there are cool ..replaced bolt with no charge. hate the hell fighter kit tho changed it out after that

[@Ocho474]

I installed the maglock gen 4 im my Springfield AR 15 Saint and I hate it. It breaks the action open as it supposed to but its hard to close it back up, I have to use my finger to move the mag release button away from the upper and lower so it can close. I think i’m going back to futureless.

[@salr1473]

I’ve come to find using the gen 2 is a lot better than gen4 due to the mag release actually being threaded like an original mag release, compared to being secured with a small Allen head plug

[@d8ed78]

Bro, that just means it needs to be tuned. Mine did the same as it would clamp down on the AR Maglock part and I had to file it down a bit. You can obviously go back to featureless or try and tune it a bit. I am on the AR Maglock Gen 2 edition personally.

[@brennanrichards6516]

I have a AR with the features of the last rifle. Can I have a forward hand stop and be legal or no?

[@narr0wm1nd49]

One point you missed was that Pistol ARs must be maglocked. The magazine outside of the grip is considered a verboten feature on pistols and you can't get around that one. So featureless isn't an option. There are a few straight pull/single shot AR pistols on the roster as well as a few other methods to buy an AR pistol lower. Most of those can be legally converted to a semi auto (upper or gas system swap) by the owner but must be AR mag locked to avoid constructing a banned weapon.

[@CRUMB831]

@narr0wm1nd49 What are the other methods of getting a lower ?

[@narr0wm1nd49]

@@CRUMB831 a shop like 2Azone can make a roster exempt configuration, transfer it to you. Then you can do as you like so long as you don't make an assault weapon.

[@jonathanesparza9975]

So I have been told that the Juggernaut Grip has to come with a COMP mag? Can anyone confirm this with me?

[@bigstew9724]

The fact that everyone just goes along with the infringment blows my mind! And you all are SO excited about it! You make it sound like SO much fun! An inch at a time, before you know it......

[@Jazzman-bj9fq]

My suggestion for everyone with a CA compliant AR where you want to be able to drop your mags is the Juggernaut CA compliant angled grip. Also I've used the Ledesma compliant grip and it's a great solution as well.

[@myparentsgarage8650]

At 3 min I appreciate the fact they left that part in because accidents happen. You could be the best weapon handler and it could happen to you. Thank you

[@RootedRay]

Hogue Freedom Fighter paired with the Kingpin from AR Maglock is the best setup. An improvement to the normal AR Maglock setup. Normal size mag release button.

[@jess500texas]

I read that Cartels buy those featureless rifles all the time and send them south to Tijuana all the time and just get a saw and saw off the fin... Sure it works

[@dennisdain987]

Thanks guys for your input. I'm new to the platform so I have no pre existing habits or preferences which makes these decisions a lot easier. I installed the Hellfighter kit and now it's just a matter of getting acclimated with it. Yes it sucks to live in (what was once a great state) but now we have restrictions. But it is awesome that companies like Juggernaut have stepped up and created products to help us 'law abiding' citizens out. I am a new subscriber to your channel so I'll have to look through what else you have out there. Hopefully you have some info on your store front(s) as I am somewhat local to where this was filmed.

[@DSIMMS650]

Can you guys do more videos on Pistol Caliber AR’s. I feel like a lot of your viewers would appreciate that.

[@weduhpeople8504]

Yes also pistol caliber semi auto subguns like the B&T APC9k which requires a fixed mag and only 10rd magazines. From what I’ve been told on Calguns it cannot have an arm brace.

[@riflesupply]

Sounds good we’ll make sure and put it on the list, thanks!

[@ApocalypticFTW1776]

Hydra arms

[@19anthro11]

Thanks for doing this! Been looking for something like this for awhile.

[@riflesupply]

Glad to help!

[@Noredlac_]

Get a keltec su16 and you can have whatever you want, no dumb fin and regular mags. There are other options that aren’t ar15s, the lawmaker’s boogeyman.

[@70HeavyChevy]

Comp mag is fine for the range. Nice to have the features, and is easy enough to reload when not practicing tactical reloading

[@riflesupply]

For sure, good point

[@AliasTekTV]

Never had a good experience with it. It's misfeeding 1 of every 4 or 5 rounds for me and got me into some interesting situations with local range RSO with a very interesting bolt override that I had to fix before we could go cold for target reset.

[@johndover7096]

I would buy the Ashford BRS system if i want to keep the rifle with all the features or i would change out the grip fins and replace them with the Ledesma Arms featureless AR grips because Ledesma Arms Ar grips can be adjusted to CA compliant

[@Nileking300]

I live in California and I don’t not comply. I will not comply and I will not comply and I do whatever I want I can I have any AR 15 FGN !!!

[@travocadoo]

Do gear reviews (plate carriers , chest rigs , battle belts ) would be nice to know what to buy and what y’all recommend

[@riflesupply]

Sounds good we’ll get that on our list.

[@MrTuna714]

Love how u explain everything keep the videos coming and keep up the good work…

[@riflesupply]

Thank you, really appreciate it!

[@famousmidnight]

Justifying these "features" made my brain hurt. None of this is going to reduce crime

[@riflesupply]

and we totally agree

[@RomanSherin-lm9cs]

So i can just install jugernaut and rifle will be legal in cali?

[@peakswashere]

No pistol grip, collapsible stock, flash hider, or vertical forward grip

[@juncapulong1911]

Yes.

[@markm148]

This is the most ridiculous load of bs add on restrictions I’ve ever seen. I have no idea how people can keep up with this or even tolerate it. Good on you guys for even bothering to make this video. I couldn’t do this stuff to my rifle. Might as well leave it home in pieces and take out another platform. These are unsafe and as stupid as a truck that has one wheel in the center. Absolutely unbelievable. Don’t argue this, don’t defend or justify these restrictions. Fight them. What a sad failure of the once most glorious state. I can go on and but it’s just too sickening.

[@dynasty2146]

Love rifle supply. Best shop ever!

[@franciscofranco5739]

Man….im so glad I left that state

[@70nlsuelo67]

This is the reason i left 10 years ago and never looked back.

[@meejmuas8686]

My favorite is featureless with mega fin grip. It still provides extra grip because of a nub near the thumb. Indo however had to find a smaller ambi safety to accomodate it. Allows me to easily hold my AR10 one handed because of the extra grip

[@kosherlechon]

The whispering reminds me of the voices I “used” to hear… 🫢🤣

[@wprunkard]

Thank you for your video. I really wanted an AR-15, but now I will have to pass and maybe find something else.

[@deltatwoniner96]

Make a top loading ar15 that has a fixed mag, but uses a side scharging bcg, that can take stripper clips. Like the sks, the dsarms fal, etc. Bear creeknarms makes side charging arms already. So make a notch somehow to accept a stripper clip and maybe a sliding or spring loaded dust cover. Just a thought.

[@weduhpeople8504]

I never liked maglocks. I only had it on my Saiga 12 and Vepr 12. Now that they are considered assault shotguns I just have them disassembled. I don’t want to put that puck where it doesn’t cycle another round after a shot. You have to manually pull the bolt back to chamber another shell. All my semi auto rifles are featureless.

[@MikoTactical]

I don’t miss having to deal with this. Thanks for fighting the good fight. California is too rich for my blood, and too restrictive.

[@riflesupply]

Yeah its tough out here

[@eel1331]

So early i can't change the resolution lol i know that was mike raahague as soon as i seen the birm

[@riflesupply]

Its 4k now lol

[@tbabajan]

Other than the trigger on my Fightlite I fuggin love it!

[@kitchenknives]

Thank you for sharing these info

[@riflesupply]

Our pleasure

[@Space-Fonzo-7]

A long time ago when i bought my first ar i took it out that week and we just needed the bullet button I had 3 cops roll up on me while shooting in the desert and they said I should remove the bullet button and ran my numbers then took off. Idk how they will treat my rifle now if they see it.

[@epg805]

Bought my rifle when we still have the bullet button mag release and with flash hider pin welded. Made my rifle featherless and nothing I can do about flash hider since it’s pin welded. 🤷🏻‍♂️

[@djtwelvetwenty2939]

Suprised you don’t have fin grip with thumb rest. So much more comfortable.

[@riflesupply]

We always do Ambi controls

[@Doc8404]

Kingpin with Hogue is the best solution imo. bolt lockback and all.

[@riflesupply]

We need to get some of those in and do a review.

[@wayneshaff3069]

Agreed, being able to crack the upper with the bolt back and clear a jam is a game changer

[@thesickness530]

Only way💯

[@patrioticspartan]

The muzzle device thing gets soooo confusing under the law. Because no flash hider/suspressor defined as any device that will lower the light that comes from muzzle by CA. Most brakes and comps are allowed but ive heard horror stories of officers saying a brake reduces flash.... so i mainly run open bore on most rifles.

[@claytonlillywhite9072]

So can you have an “evil pistol grip” if you have a mag lock system?

[@riflesupply]

Yes!

[@OriginalJadenAnthony]

i’m from texas and this shit is unfathomable

[@bertkilborne6464]

I'm from California - It's lunacy But Someone can have built guns and compliant guns - If you're at risk get caught with one, be sure it's compliant. Everything else is just parts

[@rickluttrell5529]

Vote for Democrats and it will become a lot more fathomable in your state and the rest of the free states for that matter. CA didn’t get this way because of Republican politicians.

[@HugoFrias-dq9gu]

What is the first AR15 being used called???

[@Zay96_]

Headphones on and all I hear is dudes whispering in the background lmao 😂

[@BLCKBEARDJT]

thank you for this insight I'm currently looking to get an AR! also what range is this?

[@anthonymurphy3073]

i love how you guys just talk like regular people. like you were talking to a friend.

[@riflesupply]

That's exactly what we are aiming for. Just regular guys no better than anyone else.

[@sqc281]

This is both rough and sad to watch.

[@sixsixsix.]

What stupidity...Pistol grip fins don't make the AR's any less lethal.