Cab air bag Freightliner

[@arnoldramos39]

Great video thanks 👍

[@sunny-qu3mf]

Thank you brother it's really helpful and saved my time and money 👍👍👍

[@miguelcastillo3712]

You and all your videos are extremely helpful. On behalf of all of us new truck owners thank you very much

[@vicmed6088]

thanks for tunning in

[@Gegrier01]

What happens if you don’t plug the airline

[@vicmed6088]

truck will drop and its hard to fit the air bag on

[@WhiteGuysWRX]

Just wanted to say thanks, I did my torsion arms and the few tips you posted in the video made it a 5 min job. I'm very mechanically inclined an can't see paying a shop for something I can do. These cab shocks are on my to-do list for today. 🙃🙃

[@bxgeneral23]

Thanks Vic just change my cab airbags with the help of your video 👍👍

[@abdulh7623]

Vic u a real trucker u stay keep your truck up and running

[@MalikAwan-sw2wm]

Thanks for sharing

[@Thind93]

Thanks man .I am going to change on Sterling they look similar to the freightliner.

[@vicmed6088]

man i know its a dirty looking truck.but that rain that we had here in california sun and monday.i was in the rain thats why its dirty.but ill get to it.

[@pelochino3899]

10 4..Vic..I still have a strong leak but I don't know...from where...air bag is ok..Pls...anyone help me..Tk.

[@pelochino3899]

10 4

[@monday1313]

I found a leak on the leveler valve itself. The arm that actuates the valve is on a bolt that goes into the valve box that the air lines go into. Spray some soapy water on the bolt and wiggle it around a little bit, if it blows a bubble, time to replace that too. It's a fairly easy fix. Just remember to drain the air tank too, or when you remove the airline going into the valve from the air tank, it will try and break your finger... ;-)

[@Gcal1956]

Thanks for sharing the video.

[@davidgonzalez2458]

I always thought that something else would happen if you removed the air bag from the cab like that.some one with a Volvo should be doing some of these videos,i have a volvo

[@roushonedwards452]

I'm dealing with this same problem so it's that easy?

[@udcgtdbjfvnxdhnc.f.g1357]

yup I've did it the same way

[@topdogfreightliner9148]

way to keep up on your truck.

[@ilushkaish]

not that easy. the basic idea is same, but you still need to use a jack or some kind of 4x4

[@vicmed6088]

Ilia Jakeli thanks for tunning in and your comments

[@ilushkaish]

Vic Med I had to replace on my truck and without a Block it was hard to take it off

[@georgejungle2255]

Ilia Jakeli That's why he aired everything up and plugged the air line. The other side airbag is lifting the cab up. If you bleed it down on both sides you will need a jack.

[@ilushkaish]

George Jungle it's still not enough man. I had to learn it hard ways. other side airbag does not gives yoy big help

[@georgejungle2255]

Ilia Jakeli My bags on the Pete are that easy. shocks don't let bags bottom out and that lift from the other side is enough to slide new one. My old freightliner I used a little bottle jack. I think a cheap scissor jack from a junk yard would have been even better.

[@atp1962]

You left out the most important part and that was remove and install, sometimes that can be a bear

[@pokellaa]

Tommy Pierce LOL hahaha

[@Theshyone310]

Nice video...but WASH THAT THING!