Six Cylinder Radial Engine in Solidworks 25.Assembly

[@TheZiko16]

Thank you, the preview at the beginning of the videos was really helpful.

[@alpcanpertez1553]

We are so thankful for this perfect labour. 🙏

[@olusalawu3427]

Thank you so much for this tutorial.....i cant thank you enough...excellent work.

[@abdulrahmanassaf7086]

For the last relation, when you face the problem of having the cylinders go out from their track hitting components outside the cylinder body , here is what you should do. Just mate a relation between a vertical plane of the valve component and the vertical plane of the base. Let this relation be and angle between the 2 planes... And let it be about 40 degrees. All of this to fix the rotation of the valve.

[@otmanedriouech]

im facing this probleme the piston come out hiting the counter weight what should i do

[@tylerhurst8263]

It looks like we have a relation error on part: 11.valve. It happened @ 11:00 when we made the concentric relation between the 11.valve and 14.Crankshaft valve crank. Great video regardless!!

[@tylerhurst8263]

upon further inspection, we deleted the concentric relation between 11.valve and 14.Valve housing @ 9:20 (which makes sense because we want the 17.Crankshaft rod to rotate on its axis....I guess I'm missing something mechanically....I had fun watching! thumbs up!

[@caroa.l3930]

I use the 2019 solidwork and there came a time when it no longer allowed me to make more assemblies to be more specific, it was in the part where the connecting rods and pistons began to be put, can you help me on how to solve that problem?

[@aorguy8944]

Sir I have a problem, when I assemble connecting rods and connecting rod hub, those components are intersecting each other, so I think you're missing that part of the video, I'd very grateful if you upload that part of assembly.

[@thippeshhk1339]

im having some problem the valve and connecting rods are not rotating as expected , they intersecting , how can i reach you to get it resolved

[@alexismagananaranjo7752]

just place them in the way that it looks like they will fit well, that happened to me too

[@aashishkothawade935]

Thank you so much sir

[@reddysajay7810]

why is your valve rotating instead of crankshaft valve crank is that supposed to be that way ? please respond

[@prashantdahiya711]

Sirji aap Great Ho 🙏

[@vierosxd7412]

I'd like to know what material each piece is made of.

[@bhensdadiadarshit1080]

I can't properly assemble the Crankshaft and crankshaft valve crank. Some kind of error is generate during the assembly of Crank shaft and crankshaft valve crank and those both part is not mate in the assembly so what should I do

[@gughanrajae1338]

Where we can find the bearings, because in my design library there is no bearing parts

[@CADCAMTutorialhttps]

Good job, sir

[@gresyokoumba5203]

Hello sir, in fact I have a problem, for the assembly, for the bearing I cannot find it in my library. and i have the soliworks 2016. please i need help. thank you

[@muhammadarifadnan902]

same problem :)

[@jagatutor]

Wowo iya so cool for design thanks for tutorial sir iya give me some idea 😀

[@NLANAND]

Thanks sir

[@ayariamine5167]

good job

[@bpetnoi1472]

If you watch this engine rotate you will notice not all pistons reach top dead center. After thinking about it I assume it is because the engine has an even number of cylinders. All radial engine always have and odd number of cylinder per bank. Most likely this is why the video does not show proper cycles.

[@ifigetbannedagainyoutubeis2018]

Valve and crankshaft valve holes don't even align. This is a mess

[@mrstrange4194]

When I went for motion study it's not moving smoothly why?

[@devbansal9357]

Hey cad is there any difference between solidworks and fusion 360

[@nhol815]

Hello Sir, where can I get the 3D files so I can practice the assembly process?

[@manikandans9326]

bro did you get the dimensions pdf please share the link bro

[@tonezbox8730]

Sir, from where i can get it's dimensions(measurement)

[@priyanshusingh324]

Connecting rod hub me Connecting rod apas me tkra rhi hai

[@robertbest8763]

I didn't see the steam supply to the cylinder and the piping

[@reddysajay7810]

crankshaft doesnt align with bearing support when aligned with crankshaft valve crank. It doesnt work the way you show it here. Please fix this. The bearing support hole is intersecting with the crankshaft when aligned with crankshaft valve crank. Please update the drawing

Finding the library with the ball bearings was somewhat frustrating, then I found out I just needed to enable an add-in...

[@valientemente1809]

Brother, could you tell me what that complement is? I have the same problem

[@rohanshrma4387]

Sir plss make a video on advnce surfacing

[@iqbalmalik8633]

Supper sir g one videos nx software me banso sir please...

[@alexismagananaranjo7752]

how to do the animation?

[@mdbodiuzzaman2422]

Please add Solidwork electrical videos lecture

[@akashm835]

You missed one relation in connecting rod hub that's why connecting rods are oscillating weardly Solution: just add parallel relation on right plane of connecting rod hub to valve housing front plane and re arenge the connecting rod and re assemble the connecting rod

[@kunalshivhare-dq6xd]

Sir can you provide pdf to all of parts

[@Engineering_Technology]

like

[@ilkerobali6167]

easy

[@Oceam]

okay

[@rahulkatare802]

Bill of Materials and Simulation???🙄

[@nishantkumarpradhan]

Can you send me the 2D drawing of this 3D model.

[@manikandans9326]

did you get the dimensions details share the link bro

[@nishantkumarpradhan]

@@manikandans9326 not yet bro.

[@manikandans9326]

@@nishantkumarpradhan in fb there have sum diagram details but not for all video u may get in Pinterest app bro

[@officialmaxx9041]

I think I part missing

[@danixdlolz]

siuuuuuuuuuuuuuu

[@priyanshusingh324]

Assembly wrong hai Centre match nahi ho rhe

[@KarolosAthens]

Napier Deltic !!!!!!

[@Black_Hole-j4j]

Can anyone share the above Mechanism Solid works file please