Let's design this part in Creo Parametric Blend in death in Creo Parametric • Blend in-depth includi...
Пікірлер: 48
@vikassinha95572 жыл бұрын
This part consumes lot of time because of tiny features thanks sir learn something new today
@arabstar50 Жыл бұрын
Dear Mr Satinder Your tutorials are great ❤️
@ravichandrauppin44183 жыл бұрын
Thank you very much sir for sharing your immense knowledge with everyone one....
@kelvinle86624 ай бұрын
Right click and hold for half a second for the dropdown menu to appear.
@franciscomorales3396 Жыл бұрын
Muchas gracias por enseñarnos a conocer este software.
@swapnil88543 жыл бұрын
Thanks sir nice explanation
@arkaaldov58933 жыл бұрын
Thank you! You are the best!
@arkaaldov58933 жыл бұрын
Do you have any future plans on covering assemblies and multibody parts? Also a quick tip explaining hole options in parts? Such as linear and diameter etc... Thank you for all the hard work please keep it up!
@CADxTraining3 жыл бұрын
Yes, it's coming soon.
@sandeeppk35643 жыл бұрын
Super sir... Thank you...
@niharika95243 жыл бұрын
Thanks sir
@chetanargiddi33522 жыл бұрын
Sir do u hve practise exercise from start to end which cover all function one by one
@uday2917 күн бұрын
small doubt sir how you take 50 degrees for axis at 22:20 for rib and also radius 3 at end of video
@CADxTraining16 күн бұрын
I have considered it 50 degrees as it gives me the best result. Actually it should be tangent there. But I was getting some error when I was using tangent condition there. So I considered 50 degrees to get the result.
@piyushrampariya46523 жыл бұрын
Overall fantastic . super..but where is the dimensions in the sketch page. Show as during sketching .
@CADxTraining3 жыл бұрын
I didn't understand your question.
@piyushrampariya46523 жыл бұрын
Sir ..you make sketch from a 2d drawings..where all dimensions are given..but you take dimensions very fast from that drawings . Our mind don't get it.
@CADxTraining3 жыл бұрын
You can pause the video sometime in between to understand the topic better. I don't indicate dimensions all the time to reduce the length of the video. That is why I keep the drawing open all the time on the screen. Hope you can understand the reason.
@piyushrampariya46523 жыл бұрын
Ok sir ji ...your all videos are great upper thanks a lot.
@wildtiger.11 ай бұрын
Sir, How you mentioned the centre line for rib sketch Please explain!
@CADxTraining11 ай бұрын
I have taken it as approx value
@omkargarud843 жыл бұрын
Sir you have added the part drawing next to the model tree. Can you guide me how to do that ?
@chetanargiddi33522 жыл бұрын
Start point and blend vertex not coming while right click
@CADxTraining2 жыл бұрын
Just right click will not work. Right click and hold the right click, you will get the options.
@gasserjoshua7448 Жыл бұрын
22:19 how did you derive 50 degrees? Love your videos!
@CADxTraining Жыл бұрын
I have considered it 50 degrees as it gives me the best result. Actually it should be tangent there. But I was getting some error when I was using tangent condition there. So I considered 50 degrees to get the result.
@gasserjoshua7448 Жыл бұрын
@@CADxTraining understood thank you for the explanation
@chetanargiddi33522 жыл бұрын
During video all time dimension sketch is showing which cover half area of display that is annyoing
@antonysilverious56262 жыл бұрын
sir can u please try swept blend method ..i tried swept blend to create the part but i cant able to create the rib feature
@CADxTraining2 жыл бұрын
If you are following swept blend method then at the rib using extrude.
@antonysilverious56262 жыл бұрын
@@CADxTraining got it sir ..I used The extrude feature now .. it worked ..but can I know the reason sir why rib feature is not working in swept blend method
@CADxTraining2 жыл бұрын
The surface generated by swept blend is different than extrude and revolve.
@antonysilverious56262 жыл бұрын
@@CADxTraining yes sir while doing swept blend .. the surface was not fully closed to do rib feature ... So like u said I did extrude instead of rib ... Thank u for helping me out sir .. learning a lot from u daily
@CADxTraining2 жыл бұрын
Keep learning
@yuvaraj85562 жыл бұрын
sir how to add pcd as shown in this drawing
@CADxTraining2 жыл бұрын
There is no direct method in Creo parametric to do this. You can only do this by adding a draft entity.
@prasadhire1842 жыл бұрын
Sir in my creo 7 when i use "Skecher pallets" then i received "fatal error -traceback error" Get only when sketcher pallets i use
@CADxTraining2 жыл бұрын
There is some technical issue. Uninstall creo and try to reinstall.
@prasadhire1842 жыл бұрын
@@CADxTraining it occurs every time i reinstall so many times
@CADxTraining2 жыл бұрын
You try any other version to check
@prasadhire1842 жыл бұрын
@@CADxTraining i checked 5 6 7 8 version
@CADxTraining2 жыл бұрын
Than this will be the graphics related issue
@agsamuel103 жыл бұрын
How to keep the drawing on the left as you did in creo?
@CADxTraining3 жыл бұрын
This is done by video editor
@agsamuel103 жыл бұрын
@@CADxTraining Thank you so much sir, Your videos are so helpful.