Helical gear in Creo Parametric

[@CADxTraining]

Parameter consideration: no_of_teeth = 20 /*any teeth value normal_module = 3 /*any teeth value normal_pressure_angle = 14.5° & 20° /*Standard value width = 20 helix_angle = 26 /*normal_pressure_angle = αn /* transverse_pressure_angle = αt /*helix_angle = β Relations for helical gear: transverse_module = normal_module / cos (helix_angle) pitch_dia = transverse_module*no_of_teeth normal_circular_pitch = pi * normal_module transverse_circular_pitch = pi * transverse_module transverse_pressure_angle = atan((tan (normal_pressure_angle))/(cos(helix_angle))) addendum = normal_module dedendum = 1.25*normal_module outer_dia = pitch_dia+(2* addendum) root_dia = pitch_dia - (2 * dedendum) base_dia = pitch_dia*cos(transverse_pressure_angle) normal_teeth_thickness = normal_circular_pitch / 2 transverse_teeth_thickness = transverse_circular_pitch / 2 lead = pi * pitch_dia / tan (Helix_angle) root_fillet = 0.38*transverse_module semitopping = 0.1*transverse_module Involute equation: theta = t*90 base_radius = base_dia/2 cir_len = (pi * base_radius * t ) / 2 X_PNT = base_radius * cos(theta) Y_PNT = base_radius * sin(theta) x = X_PNT + ( cir_len * sin(theta) ) y = Y_PNT - ( cir_len * cos(theta)) z = 0

[@ductan]

Thank you very much

[@gymastic_tips_94]

Literally very much useful sir thanks for the parametric formula, i have made both gears by ur method and done absolutely perfect with animation ☺️

[@aneesurrehman4135]

gears and turbine/compressor/fan blades are one of the most technical design models in cad

[@deepakkumarsahu1590]

great mind comes with great knowledge.

[@sperinjery]

Great Explanation and knowledge base. Would like to know how do we add addendum modification coefficient to this model as this factor is considered in gear specific software like Romex

[@cdl1701]

Is there a way to add the helical sweep direction, LH or RH, to a family table? This would allow the ability to family table the gears all in one family table.

[@vikassinha9557]

Thank you sir

[@aneesurrehman4135]

amazing 💞

[@rabindrabehera9866]

super sir

[@mahesndm9776]

very thank sir

[@naveenkumara3691]

Thankyou 🤗🤗🤗🤗

[@krishnaekhande3126]

Please make video on all bevel gear design using creo

[@upindersondh]

Amazing !!!!!

[@canti2pd]

Hello, if we wanted to modify the formulas and relations to make an internal helical gear (for a planetary gearbox ring gear), how would we do that?

[@hirenhadiyal1409]

Jay Hind Sir Satyendra Sir, Please make a video on Gear Box

[@user-yy7yi6uj5t]

Hello please make video on sieve web belt sprocket

[@deepakkumarsahu1590]

sir please explain the curve equation.

[@shashindave6757]

Please video on worm gear

[@KunalArrt]

I drew that with Blend !! Is it ok ..?? Please guide..

[@atherfarooq5222]

SIR ,WHEN CHANING THE TEETH DIRECTION FOR HELICAL GEAR 2, THE PROCESS FAIL TO OCCUR,, HELP ME

[@papathorat3387]

Sir... Do we need to make some changes in formulae while designing helical gear with modified addendum correction? If so please guide me.

[@CADxTraining]

Just follow this video step by step.

[@syedmubarak8732]

How to design an internal helical gear in creo?

[@CADxTraining]

That I have not done yet

[@shashindave6757]

Make video on warm gear please

[@CADxTraining]

It's coming soon.

[@dineshd2988]

Sir Can you please make a video of shrinkwrap part file and shrinkwrap feature

[@CADxTraining]

Yes I'll do that but it will take some time. Currently I am working on worm gear.

[@dineshd2988]

Thank you sir..

[@raghumandula6614]

You can start an online class for learners....

[@CADxTraining]

Yes I am doing this.

[@bulanddio2438]

Do you know how this flat gear is drawn? cdn-adffp.nitrocdn.com/crbUCoDsRphTMSdwYVBXyPMAWsKkoBOp/assets/images/optimized/rev-228bac1/wp-content/uploads/2021/10/fishing-reel-gear-ratio.png