Hi everyone - let me know if you have any questions about Quantifier in the comments below! :)
@mind.sight.studios4 жыл бұрын
Nice work Justin! I'm glad you showed examples of creating objects with the built-in tools rather than with Profile Builder. Some people don't realize that you can use Quantifier Pro to quantify any type of SketchUp geometry, not just ones created with Profile Builder.
@bikerchrisukk3 жыл бұрын
This looks very good, I might give it a go soon, thank you. What I do like about this, is how it's flexible and can use materials or tabs - things that are created anyway.
@indie3d4 жыл бұрын
Thanks for making cool SketchUp videos they are very informative 😃
@GrigoryMashuryan4 жыл бұрын
I bought it today! Will wait for discount for profile builder 3😊
@nigelyoung86304 жыл бұрын
Hi Justin - is it possible to have a dynamic link between SketchUp and a spreadsheet, so that an update in the spreadsheet automatically updates SketchUp? What I would like to do is create my layers/tags in the spreadsheet with all their data, and then have SketchUp create the layers/tags from that? I'm trying to template my work, and this sort of reverse creating of layers/tags would work well for me. Looking forward to your thoughts :)
@newagemusic32033 жыл бұрын
Very good question
@TaranpreetSingh132 жыл бұрын
following up for the response.
@chexvanz5 ай бұрын
Can Quantifier costs transfer between models? Having a bit of trouble doing that
@ed209eddiepeter12 жыл бұрын
Hi Justin, I’ve only recently started using quantify. Like yourself I use standard codes e.g 09_M Stone Crusher 19mm, 10_M River Sand, 11_M Plaster Sand, however quantify a doesn’t seem to keep a recording of the codes used when I open a new project. This means that I need to re-enter my codes and their descriptions on every new project. Is there a way in quantifier to record all your codes and their descriptions, so as to use them continuously without having to re-enter them on each project?
@sandydebruin72862 жыл бұрын
Hi there can this be used with carpentry / shopfitting materials
@jdickson274 жыл бұрын
Hi- I bought the extension because of this video! When doing my material report- it does not include the waste %?
@Thesketchupessentials4 жыл бұрын
I don't know the answer to this. Where did you apply the waste? Was it a material based calculation? A calculation based on the area of an object? Did you run the same report I did?
@davidandersen99734 жыл бұрын
Another great video, Justin! As an estimator in the construction industry would you say this is one of the best estimating plugins you've come across for Sketchup? Thanks!
@Thesketchupessentials4 жыл бұрын
Yeah I'd say so - there's another "estimator" extension from John Brock that I haven't really tested much. This one seems to be the most polished so far
@Z-add2 жыл бұрын
@@Thesketchupessentials is this what you use professionally?
@Thesketchupessentials2 жыл бұрын
@@Z-add Not for large projects - since I work for a large commercial firm, we get a large majority of our models in Revit rather than SketchUp. Obviously you can't use a SketchUp extension to quantify a Revit model. I would definitely use it for smaller projects where I have more control over the SketchUp model though
@decilsamuel35883 жыл бұрын
I would like to ask the Quantifier Pro plug-in, the U. S. dollar can be adjusted into the Chinese yuan?
@Thesketchupessentials3 жыл бұрын
I don't know this one
@orchardheadstudio10234 жыл бұрын
Thanks for helpful vid. If I had 3 different thicknesses of stud, eg 4 x2, 6 x 2, 2, 2, on a layer/tag called "Studs" would I actually need to create 3 layers to get a cost per linear foot for each type of stud? I am worried about my layer/tag list becoming bloated if thats the case. Thank again
@orchardheadstudio10234 жыл бұрын
Sorry I meant studs sized at 4x2, 6x2 and 2x2 inches
@falgunpatel31584 жыл бұрын
Whenever we upload cad file which have curv wall plan so how can we trace them or pull push them ??
@Thesketchupessentials4 жыл бұрын
Start here? kzbin.info/www/bejne/mWOrdaCBe816ja8
@josephfdunphymba32412 жыл бұрын
Excellent
@Thesketchupessentials2 жыл бұрын
Thanks!
@gddraftsman56174 жыл бұрын
big help, thanks, even I'm down and being scam,
@macroiu37784 жыл бұрын
i hope this plugin could earn their expected profit but the functional design is below expectation that you should warn the developer the improved version: 1...various materials related to cost table item by mouse click, 2...timeline specifier to apply on different layers built for he models at different period of time, 3...generate section cuts from the built layers with several default animation options to show progress for user to select & present to boss......otherwise the plugin is for free....
@Thesketchupessentials4 жыл бұрын
Well first of all - you don't get to dictate what features are required before a developer can charge for their extension. For item 1 - you can already relate costs to materials in the extension. Item 2 - I think you could do this with different layers, but are you actually creating cost loaded schedules? Otherwise why would you want this? And for 3 - you can create these animations in SketchUp already.
@joelamaral1408 Жыл бұрын
link to download pls..
@narfi4jah4 жыл бұрын
This is not free plugin, so sad
@Thesketchupessentials4 жыл бұрын
Developers gotta pay bills too...
@scaniapower46103 жыл бұрын
you go far to fast to actually see what you doing how the hell is any ment to follow along when you click so fast to see what your doing
@Thesketchupessentials3 жыл бұрын
You know, honestly I don't feel like I went that fast...