Calculating the Size of Knife Pleats formula| formula @fashion academy MJ

Calculating the Size of Knife Pleats formula| formula ‪@FASHIONACADEMYMJ‬
free fashion design course at home Hindi class
The key to pleating is all in the math. You need to calculate the length of fabric you’ll need so that, once pleated, it equals your waistline measurement (or any other measurement you want to bring it to), plus seam allowances on each side.
Generally, each pleat takes three times its width in fabric: the pleat (as it appears on the surface), the underfold (turn-under), the underlay (return). In other words, each pleat is three layers thick. So, to create a 1”pleat, you’ll need 3” of fabric
For example, if your waist measurement is 25” and you want to create a fully pleated skirt, with 1”-wide pleats, you’ll need to multiply the waist measurement by 3 and add seam allowances for each edge. 25 x 3 = 75 + 1 (2 x1/2” seam allowances) = 76.
However, the width of each pleat depends on the desired design effect and is totally up to you. In this example, we’ll be creating a set of 1”-wide pleats.
In order to create our template, we need to draw two markings for each pleat: one line for the fold of the pleat (usually referred to on patterns as the foldline), and one line for the line to which the fold is brought (the placement line).
Let’s take a look at what a template for knife pleats looks like:
HERE you can download a printable template for 1″-wide pleats.
If you wish to add some pleats to an existing pattern that doesn’t feature any pleats, you can do it pretty easily in these 3 steps:
Trace the pattern.
Draw slash lines for the desired amount of pleats parallel to the center front/back.
Slash the pleat lines and spread for two depths of each pleat.
Forming Knife Pleats
NOTE: If your pleated piece is part of a garment, any hemming should be done prior to pleating. It can be done afterwards, but you would need to repress the bottom of your pleated project.
In general, knife pleats are formed from the right side, especially if you are working with striped or plaid fabric that requires careful pleating to position motifs.
Because you are working in multiples, you need to mark your fabric very accurately. Some sewists like to use basting stitches to mark the foldline and the placement line for each pleat. Personally, I find this technique pretty time consuming and prefer to mark the pleat foldines and placement lines with different colored pins. Choose your preferred method and use pins, basting stitches, fabric marker, chalk etc. Regardless of the method you select to mark your fabric, it can help to use two colors: one for the fold lines and a second for the placement line.
Use your template as your guide and pin-mark the pleat fold lines with different colored pins along the edge you are about to pleat: yellow pins for the foldline and pink for the placement line. Shift the template as you go and remember to leave seam allowances at both ends.
Fold the first pin (yellow) to the second pin (pink) to form the first pleat.
Fold the next yellow pin to the pink pin following it.
Repeat the same steps until you reach the end.
Pin in place to secure.
Note: If the fabric to be pleated has joining seams, you can plan to hide the seam inside a pleat.
When your pleats are all formed and pinned in place, and you’ve doubled checked that it all measures up and fits your waist, take your fabric to a sewing machine and run a line of straight stitching to baste them in place. Sew about ¼” away from the edge, taking out the pins as you go. You’ll remove these basting stitches once you have your seam in place.
Tip: Sew with the fold of the pleats instead of going against them.
Press pleats along the fold for a crisp look using steam and a press cloth if necessary, press lightly or leave them unpressed to create soft folds. Remember, your pleats may be soft or sharp, but they must be accurately measured to look good.
When folded and positioned, all knife pleats usually go in the same direction. But to achieve a certain stylistic effect, they can also go in two directions. These pleats are formed in two separate sets. Each set faces in the opposite direction from the center, on either side of the center front and the center back.
If you wish to give your pleats more definition and secure them in place, you can run vertical lines of topstitching as close to each folded edge as possible and going down a few inches (or whatever inches you want), backstitching at both ends. The decision is totally up to you as this is simply a matter of style and personal choice. This technique is often used on crisp skirts to secure pleats from the waist to the hip and will give you a nicely defined top but will allow your pleats to open at the bottom.
Continue on with however your project calls for finishing the garment.
#youtubeshorts
#ytshorts
#youtubevideo
#patternmaking
#pattern
#viralvideo
#viral
#couturedesign
#finishing
#fashion
Instagram link 🔗
/ fashion_academy_mj

[@shanthiayyanar9433]

My full waist size 38 ple calculate the cloth..