❌ never make mistakes when using an electric angle grinder

Never make mistakes when using an electric angle grinder.
The electric angle grinder is an essential tool for many types of jobs, it is used for cutting, grinding, sanding and many other functions. however, at the same time that it is very useful for the most varied types of work, the electric angle grinder is also a very dangerous piece of equipmen however we must be attentive when using an electric angle grinder. Wear all personal protective equipment and always properly maintain all angle grinder parts before using an angle grinder. In this tutorial I go over a little of what we should and shouldn't do when working with an angle grinder. If you liked the video, don't forget to leave a like and subscribe to the channel to always stay on top of all the news.
#caldeireiro #grinder #anglegrinder #welding #grinderwelding #boilermaking #caldeireirowelding #welder

[@caldeireiro23]

✅how to install hinge 👉🏼kzbin.info/www/bejne/paHWo3uaj5ydbas

[@paulcragg1315]

No mention of unplugging the grinder before changing a disc.

[@2035jim]

I was thinking the same shit that’s the best way to lose a finger

[@jamesbarbour8400]

​@@2035jimabsolutely - safety first - always !

[@user-xz9wr5if9d]

Disconnect batteries on cordless grinders too. Learning this the hard way is a good story, but not a story I'd want to tell

[@2035jim]

@@user-xz9wr5if9d yeah I’d rather not have to tell that story either

[@udayamendis1956]

Demonstrator has violated the golden rule.... Never try to replace discs with the power code is connected...

[@caldeireiro23]

🙏🙏👍

[@shan8737]

Instead of having background music, why not explain what you're doing?

[@grantm6514]

Because it's youtube, so there HAS to be music, no matter what, apparently. Also, so the music will become extra annoying when you watch at faster playback speeds.

[@shan8737]

@@grantm6514 true😄

[@twotone3070]

The video is not about angle grinder safety, it's about revenue. Unfortunately by commenting we are assisting in it's proliferation.

[@bigmacdaddy1234]

Why don't you watch and pay attention. Talking will not make it clearer. It's already clear.

[@shan8737]

Attitude!

[@caldeireiro23]

✅🚀 Watch this amazing video 👉🏼kzbin.info/www/bejne/g36lg52hbrKiqrc

[@ALEFILES]

Yo tengo la misma amoladora MAKITA...La mejor!

[@giordanocarpita6580]

Nel video non ha specificato la cosa più importante, e cioè ogni operazione di posizionamento dei dischi, deve essere eseguita tassativamente con la spina della smerigliatrice staccata dalla presa di corrente.

[@123456zenn]

Good teaching. I learned a lot before using my grinder for the first time.❤❤❤

[@caldeireiro23]

👏👏🤠🙏🙏

[@emm_arr]

"Good teaching." Not really. It doesn't even show the recommended and safe way to install a disk.

[@dcpowered]

The best video i have found to teach me how to use an angle grinder correctly for the first time! Thanks! 😊

[@caldeireiro23]

🤠🙏🙏🔥🚀🚀

[@jeffreystephenson6946]

There is an arrow to tell you direction on the machine you muppet

[@hanspflucker4482]

Lo hiciste sin hablar nada, este es el video que estuve buscando, mil gracias

[@caldeireiro23]

🙏🙏🎉🎉🚀

[@eddieme2009]

Nice, im a noob when it comes to using grinder.. thanks 👍

[@wildworldz627]

MY BIGGER PROBLEM WAS SLOVED THANK YOU

[@caldeireiro23]

😉🙏🙏🔥🚀

[@gregarrell6132]

Read the manufacturer's instructions. They explain the correct way to use the tool. As you become more experienced you will see why some of the safety features bare there. I worked with numerous people who were badly hurt because they thought "it would not happen to them." Wen a blade (particularly ultra thin blades) shatters, it can really cause serious damage to you.

[@ronkali5365]

The first thing most people do is take off the guard, man do i hate those ultra thin blades. I like the bosch, because you can control the speed of the grinder on some models

[@DVSONENL]

​@@ronkali5365always leave the guard on. And the 1 mm cut off disks slice through metal like a hot knife through butter.

[@davidvintr3007]

​@@ronkali5365Nejen Bosch !!! U Bosch platíte za jméno... Mám zkušenost například YATO YT-82020 a NEJSEM DEALER!

[@SloopyDog]

I found out to my cost how dangerous angle grinders are. I was cutting a plastic sewage pipe with a saw blade on the grinder. It kicked back and the blade went down the middle of my index finger also taking off the tip of another finger. Several years ago I was cutting through a brick, the cutting disk grabbed my teeshirt which wrapped around the blade. I was unable to turn it off and it cut a ten inch gash into my stomach. I can not blame the grinder it was my fault for being so stupid. I respect the angle grinder now and follow all safety rules.

[@caldeireiro23]

😳🙏🙏🚀🚀🚀

[@gjaguar99]

Para eso es la llave PARA APRETAR No solo con la mano!

[@daviddelair1754]

Eso no lo entendí

[@daviddelair1754]

Para mi no tiene que apretar con la mano

[@princeamongmen7064]

Well I just learned something new from you today and I thank you 🙏

[@useruser5716]

Ok gracias,; Lo tomaré en cuenta. Saludos.

[@caldeireiro23]

Gracias por tu comentario, siempre debemos tomar todas las precauciones al utilizar la amoladora angular eléctrica. Abrazos 😃🙏🙏

[@andreyalla22]

Спасибо за подсказку! Надеюсь, что так на самом деле правильно фиксировать гайкой круги. Я всегда делал наоборот... А вот насчёт того как устанавливать отрезной круг картинкой вниз или вверх не знаешь, кого и слушать. А хотелось бы знать наверняка.

[@caldeireiro23]

🤠🙏🙏

[@edilsonsilva5668]

Excelente trabalho, muito bom

Thanks for the video.

[@rooteroman]

1 - El sentido de giro de un disco, si es necesario, se indica muy claramente con una flecha GRANDE visible a simple vista con forma CURVA y lo que tú muestras en el video es parte de un logotipo diminuto. Observa un disco de corte de diamante y verás lo que intento decirte. 2 - No te he visto utilizar guantes o gafas de protección. 3 - La máquina incluye una llave para fijar la rosca de apriete que tampoco has usado en ningún momento. Creo que debes aprender a usar una amoladora correctamente antes de dar consejos a los demás. Un saludo.

[@miguelonubaelandevalo]

@igorshevchuk77, efectivamente amigo este tipo se cree que la llave la trae para hacer bulto

[@philiprahman6778]

Thanks, I always made mistakes. Now I know what is the correct way.

[@caldeireiro23]

🤠🚀🙏🙏

[@omnilovismus]

Wenn ich mir das Gefummel ansehe, bin ich froh dass mein Winkelschleifer mit dem X-Lock System ausgestattet ist. Ich kann mir vorstellen, dass dies eines Tages der Standard sein wird.

[@caldeireiro23]

🙏🙏🔥🔥🎉

[@bernardocisneros4402]

I'm confused. Do you or do you not use the spanner wrench to tighten the cutting wheel? If you're not supposed to use it, then why does the manufacturer provide one with the tool? Common sense tells me to push button to lock angle grinder and use spanner wrench provided to tighten cutting wheel to grinder. Am I wrong?

[@DVSONENL]

Hand tighten and then give the Cut off disk or abrasive disk a pull to tighten it a bit more and you're good to go.

[@bernardocisneros4402]

@@DVSONENL Thanks, when I bought my angle grinder I tried it both ways and they both work fine, but using spanner wrench takes longer.

[@andrewcoulter525]

Don't use the wrench on the flange nut when fitting a cutting or grinding disc. Just snug it by hand. When the grinder spins up the inertia tightens it up. The wrench is supplied so you can loosen the flange nut when you want to remove the disc. If you tighten the flange nut with the wrench it is possible to over-tighten it which can damage the disc imperceptibly leading to failure of the disc. This is one of the reasons a disc can shatter in use. You should never use a disc you don't know the history of, or a disc that has been dropped for the same reason. Discs also have a expiry date printed on them. Don't use them past that date. Expired discs have a greater chance of shattering because the adhesives holding everything together degrade over time. Keep your discs in a dry environment away from humidity. Humidity can cause premature failure of the adhesive and disc failure.

[@bernardocisneros4402]

@@andrewcoulter525 Thanks for all the good info

[@Paotakloi]

Very interesting. Waiting for next video

[@caldeireiro23]

🤠🙏🙏

[@user-gj1xl4wo5x]

Thanks! Very useful video, Bravo!

[@caldeireiro23]

😀🙏🙏👏

[@arturodelagarza9028]

WE LEARN EVERY DAY. WOW GREAT INFO 👍👍👍👍

[@caldeireiro23]

🙏🙏🚀🔥

[@danielcep1879]

Excellent, clair, brillant!!Merci...

[@francoismouton8338]

merci pour tout ces bons conseils..

[@caldeireiro23]

🙏🙏🤗

[@boutrosalkhouri4523]

You can’t say aweseome to your self, when people watch they decide about it not you, 😂.

[@caldeireiro23]

😃👏👏🙏

[@guruprasadcv5358]

Excellent advice

[@caldeireiro23]

🚀🚀🚀🤠🙏🙏

[@rudyvalentin1789]

I've been cut with a couple of times witn an angle grinder. My quick reaction spared me from losing a finger. Also I didn't blend out because the friction from the blade cauterized the cut at the same time.

[@caldeireiro23]

It really is a very dangerous piece of equipment 🙏⚠️

[@drnh4444]

There used to be something called common sense.... unfortunately those with none need videos like this

[@caldeireiro23]

Thank you for watching our video and leaving your feedback! have a great day 🙏🙏🚀

[@danieltarcho9324]

Me parece a mi... a miiiiiiiiiii. Que la llave, Y ES COMO ME ENSEÑARON, sirve para para ajustar y desajustar la tuerca de apriete del disco SEA CUAL SEA. Y QUE NUNCA SE DEBE APRETAR Y DESAPRETAR A MANO, por que un disco de corte puede estar dañado y lastimarte.

[@BHP15]

OK now, I did not know that i could fasten the disk with my hand without grinder tools. i am killing myself using it to fasten the disk.

[@caldeireiro23]

🙏🎉🚀🚀

[@peritobrasil]

I almost lost my feet using this equipment.

[@caldeireiro23]

Thanks for watching and leaving your feedback! I wish you all the best in your life 🙏🙏🎉💪

[@joepro3562]

So for years I've been loading my cutoff discs backwards? I've never had problem, is there something I'm missing? I just went up on a Norton Abrasives video on how to load a disc, why are they showing the wrong way? Put this in KZbin search and see for yourself - How to mount a cutting disc onto an angle grinder correctly. I honestly just want to know which way is correct and why or does it even matter.

[@user-sl3il5sz2s]

Relax, no matter which side. 🙂

[@tassie7325]

I just went and checked my discs as I couldn't make out what it is that he was highlighting and I have no such marking on my discs. To me it looks like a standards approval stamp, just like all the other markings on his disc. I think he just saw what he believed to be a directional arrow and jumped to the wrong conclusion. Additionally, it makes no sense that they would be directional as there are no teeth involved, just abrasive particles.

[@danielkonrad1444]

Makes No Sense to make a directional arrow so small everybody will Miss it. Cutting Discs are Not directional. Put them as you Like. I prefer colored Side Up.

[@pjwoo276]

why didn't you just use a shovel to point to that microscopic directional arrow on the disc ?

[@caldeireiro23]

🙏🙏💪🚀

[@Lanesplitter]

Check the date stamp on the steel ring - the structural integrity of phenolic resin deteriorates with age. A fragment of wheel travelling at 80 meters per second could potentially kill you.

[@caldeireiro23]

Thanks for watching and leaving your feedback! I wish you a peaceful day full of blessings 🙏🎉🎉

[@ascensaoomega541]

Jamais trocar os discos de corte com éla ligada na tomada!

[@caldeireiro23]

👏👏🙏

[@igorshevchuk77]

Это надо смотреть "супер умным" для техники безопасности 👍

[@joseivodasilvaivo9020]

Boa tarde Não é necessário mesmo aberto um pouco o disco quando colocar na máquina?

[@artyfhartie2269]

Never use a grinder to clean your hands

[@caldeireiro23]

🙏👍🚀

[@ricardoluz...]

Boa instrução ...

[@caldeireiro23]

🤠🙏🙏

[@fakrulislam5404]

thanks a lot

[@caldeireiro23]

😃🙏🙏

[@XRavenHunt]

I've made the mistake of taking the guard off once and the result was 20 stitches and a cast on my arm for 3 weeks.

[@caldeireiro23]

🙏🙏

[@hugohernandez6726]

Nunca corten madera se traba y salwn para cualquier lado me corté la altura del pecho..

[@caldeireiro23]

Thanks for watching and leaving your feedback! May your day be blessed 🚀🚀🙏🎉

[@marceloalexmenezes2797]

Quer ensinar mas Botou o disco de corte virado!

[@Hewagej]

Amerzon video thank you so match

[@caldeireiro23]

😎🙏🙏

[@vikto95]

thank you very much!

[@Serralheiro]

Very good

[@daniel27959]

No se vos pero yo voy a seguir usando la llave para ajustar el disco

[@user-bu2nu8lt5m]

Не въехал, как ставите круг? Знаю по науке, круг ставится мет шайба вниз. За кожух лайк. Тут со своими соратниками бьюсь, что б кожух ставили обязательно. Без кожуха это пижонство. Тем более производительность падает. Искра летит куда попало, плюс все аремя в напряжении.

[@caldeireiro23]

😃👏👏🙏

[@raulmarulanda8529]

Muy bien gracias

[@Eagle0000]

Tomando la amoladora lo mas atras posible sin obtruir las ranuras de ventilacion se obtiene mayor control sobre ella en el video se ve que practicamente la esta ahorcando con la mano

[@caldeireiro23]

😃😃🚀🚀

[@robertopablovizcarra3023]

Buenos consejos

[@emgee8483]

Safety first.

[@MForMaker]

good idea

[@caldeireiro23]

Thank you, watch this other video too 👉🏼 kzbin.info/www/bejne/pmfKhqadYspkp68

[@alanricardo8895]

Muito bom

[@albertbordelio986]

No dia que as empresas colocarem o manual junto com o equipamento, muita gente vai conseguir usar com segurança

[@1891kmk]

Uhhh I’m pretty sure they do not sure what the hell u r talking abojt

[@juliofranguellifilho5968]

Ótima dica

[@caldeireiro23]

Que bom que gostou 🤝😎

[@michaelschofield1537]

Why did you not use the peg spanner to tighten the outer flange before you ran it up? Contravention of regs right there, not good education, hand tighten is NOT acceptable

[@caldeireiro23]

thanks buddy, I'll check it out 😃😃

[@barrysmith8193]

Say here’s a thought……. How about creating tools that are safe and appropriate for left and right handers alike? This right handed grinder sucks for left handers. I have other tools that blow saw dust into my vision and eyes not away like right hand action. We left handers should get some sort of credit on the purchase price for having to accept unequal consideration, or at a least “right Handed Version” should be printed on the packaging.

[@repetemyname842]

Not enough Southpaws in the population to make it worthwhile for the companies. Sucks, I know, but thats how corporations work.

[@danielkonrad1444]

Dude, rotate the shield and Put the handle in the other side. All anglegrinders are two sided.

[@williamlorimer060867]

This video is funny the first thing you do with a new grinder is to throw away that handle

[@davidvintr3007]

Při řezání je kotouč vertikálně držadlo také a je to pro praváky nešikovné. Levé předloktí je nad ochranným krytem. Pro broušení je vhodné aby byl kotouč horizontálně a držadlo také, vypínač je nahoře.. Toho lze dosahniut JEN přetočením převodovky proti motoru. Prakticky je potřeba mít dvě úhlové brusky. 👋👋👋🤠👍

[@siriosstar4789]

Not well thought out at 1:25 you make a cross with your finger indicating that holding over the motor housing is wrong but then make a check mark indicating that it is right .

[@rodolfomautino2196]

El primer disco de corte está puesto al revés☝🏻

[@caldeireiro23]

🙏🙏

[@2402ajay]

Well commented my friend.

[@caldeireiro23]

thank you my friend 😀🙏🙏

[@idetubeid]

✅❤️

[@caldeireiro23]

😃🙏🙏🚀

[@miguelonubaelandevalo]

Pues ahora me entero yo que la llave que traen la amoladora angular es solo por gusto o para hacer bulto

[@caldeireiro23]

Uso la tecla solo para soltar el disco. 😎👍🤝

[@ukrainianUA777]

Ерунда это всё с переворачиванием гайки и отрезного круга по металлу

[@caldeireiro23]

🙏🙏

[@brat210787]

👍👍👍👍👍👍

[@caldeireiro23]

🙏🙏🚀😉

[@KallenSC]

2:44 is actually wrong:) first time was actually correct!!! ALWAYS put metal ring on disk from ginder!! This protect from breaking disk and jaming disk!

[@caldeireiro23]

👍🙏🙏🚀🚀

[@enricofavetta4633]

Interruttore, molto duro.

[@manuelmosquera1038]

Nunca lo hago ..

[@caldeireiro23]

😃🙏🙏

[@antoniobaptista928baptista6p]

❤

[@caldeireiro23]

🙏🙏

[@FC-qe1wl]

The guard he is using is for grinding, NOT cutting. There is a different guard for cutting. But even a wrong guard is better than NO guard

[@caldeireiro23]

Never use the angle grinder without protection 🙏🙏🚀🚀🔥🔥

[@ianhillman4007]

Narration instead of annoying music would have made this video 1000 times better...

[@caldeireiro23]

thanks for the suggestion 😃🙏🙏🚀

[@renatobatista4312]

Você descobriu o mundo

[@arkonman]

the second is wrong

[@caldeireiro23]

🙏🙏🎉🚀

[@danmetalgods5048]

Esta errado a instalação do🎉 disco, a porca tem que ficar em contato com a parte metalica do disco.

[@caldeireiro23]

🤠🙏

[@carlosatiles9964]

first mistake for safety change the disc with the grinder disconnected and have safety gloves to start working or continue working

[@creative1000K]

😮

[@caldeireiro23]

👍🙏

[@user-bt5qt9pp4x]

I have cut myself on a tablesaw before, never an Angle grinder. I can imagine the angle grinder would hurt much more as its a burning grind rather than a slicing cut. Can anyone testify?

[@caldeireiro23]

🙏🙏

[@donaldgodide8740]

I cut my finger with a big grinder never felt it only realised after l saw blood and l thought it was from the guy l was working with it was a small cut but deep. I still have my finger but with a scar ..mistake l did was l got destructed so never put your eyes off any power tool they are very dangerous

[@user-bt5qt9pp4x]

@@donaldgodide8740 Sounds similar to my tablesaw injury then, barely felt a thing until I noticed the blood. I guess any fast spinning tool will severe the nerves before you can register pain but would you say the recovery pain after was really bad? I did suffer serious throbbing and minor psychological distress for a few days myself

[@santiagodominguez491]

Creo que no aprendí nada😂

[@silmarsoares2010]

A chave que acompanha não serve pra nada então?

[@caldeireiro23]

A Chave é usada apenas para soltar a Flange, nunca para apertar. 🤝👍

[@abranco4523]

Nunca usei nem pra uma coisa nem pra outra

[@petrosnikopulos7098]

its very dangerous because you will not feel any pain till goes to bone

[@caldeireiro23]

🙏🙏🚀🔥

[@JagtarSingh-vb7hy]

कुछ नया बताते कोई एक आध होगा।जिस को पता नहीं। कोई ताज़ा बना मैकेनिक 👍

[@caldeireiro23]

Thanks for the comment 👍🤝

[@edithfreeman4367]

Did l miss the part where you mentioned to disconnect electrically when changing the disc?

[@caldeireiro23]

watch this other video👉🏼kzbin.info/www/bejne/aZXNaqecadVmoJo

[@user-zu3zz9th9q]

👍👍👍🙏🙏

[@caldeireiro23]

😃🙏🙏

[@wingkailiu1740]

go to use x lock

[@caldeireiro23]

🙏🙏

[@rinaldobosio5838]

Hai scoperto l'acqua calda....😂😂😂😂😂😂

[@micheleberto9302]

Cambiare il disco con la spina inserita non mi sembra un ottima idea...

[@caldeireiro23]

😎🙏🙏

[@Middlestepofficial]

Biggest mistake you were doing through the whole video is replacing discs while angle grinder is plugged in.

[@caldeireiro23]

😉🙏🙏🚀

[@1891kmk]

Probably the same type of guy that grinds in flip flops

[@caldeireiro23]

🚀🙏

[@abranco4523]

Disco não tem lado

[@VOODOOphg]

Clickbait

[@caldeireiro23]

🙏🙏🚀

[@ricardojuricic9027]

👎por poner música en vez de explicar

[@mikmik9034]

Sad, this might have been interesting, but being a DUMB (no narration, silent) Video it is useless to me. I task while listening, rarely watch videos.

[@fernandovergara3119]

Dónde estás chufa por noche

[@caldeireiro23]

Thanks for watching and leaving your feedback! May all your dreams come true 🙏🙏🤠💪

[@franciscoruiz3560]

Buy vien

[@rb-ex]

this video started out ok with putting the nut on correctly for different thicknesses of disc. and ya, you should always use a guard. but then you got muy stupido making up stuff about the direction of a fiber disc. you are using a norton disc. look on their website for a video that tells you the disc orientation is personal preference and makes no safety or functional difference. stop making stuff up in your brain and focus on real safety issues like angle of incidence, rpm's and matching discs to materials

[@caldeireiro23]

Thank you for your comment, I'm glad you understood the objective of the video, we are just trying to pass on a little of our knowledge, especially for beginners, as the angle grinder is a very dangerous piece of equipment 🙂🙏🙏