Calibrate MYGIG radio screen

[@CrazyIvan987Channel]

OMG THANK YOOOOUUUUU!!!!! I couldnt use my touch screen for about 5, 6 years & with the help of this video i got it back!! Thanks!

[@CapnDanTreasures]

Thank you, Thank you, Thank you, and in case I forgot to mention... Thank you... I accidentally messed up my calibration, and now, because of this video, and the precise and great illustration, it's fixed... what a relief!!!! This video is a very great tool, very well-done Sir... Thank you Matt.... Dan

[@toddspraker8916]

How can you tell what version you have?

[@jeniwinchell6428]

Thank you so much for this video! It was a life saver for a kiddo that wanted a movie but the calibration was off so I couldn’t select the dvd option!

[@SMV372]

There's a way to get to the calibration settings if you have a newer version. I have v. 9.214 and I touch the menu button and hold it, then seek up AND down buttons at the same time. It gets you into engineering mode.

[@vadude21]

Whoa! This might be the gold mine advice! I’ll need to upgrade and see what happens. What model radio?

[@rachelklessig2541]

This is the version of software on mine but I can't get it to into calibration settings using those buttons?

[@XX-og9yi]

DUDE you're a god, saved my ass with this comment 🙏

[@youtubular007]

Problem is with that version, once you are in engineering mode you have to use touchscreen to get to calibration menu option. Doesn't work if your screen is already bricked. Only this older version gets directly there by hard buttons. Mine's been bricked for years. I don't know how to downgrade the version.

[@Jeffro2273]

My radio has a button marked NAV where yours is AUDIO how do I get into the calibrate screen?

[@ktjarvgaming7002]

Did you ever find a solution, I'm having this issue right now

[@Jeffro2273]

@@ktjarvgaming7002 nope.

[@ktjarvgaming7002]

@@Jeffro2273 that's rough, I completely bricked my touch screen in my Sebring, but I figured out how to fix

[@iwadeable14]

@@ktjarvgaming7002how did you fix it?

[@ktjarvgaming7002]

@@iwadeable14 by a miracle when I was in the calibration screen I did touch the screen in random spots, so while the screen was "unusable" I had calibrated it enough to have some random spots on the screen actually press buttons, but they didn't translate to anywhere close to where I was accually pressing. I spent 3 days pressing randomly till I had a stroke of luck and got back into the menu and fix it

[@luiscasillas9853]

Mine has seek up, radio media and nav. Not audio. What do i do?

[@TheBULLRAM]

Do exactly as you see on the video press the navigation button and the up and down seek press all three at once and let go and you'll see that screen be super careful in there if you scroll down slowly you will see calibrate screen do exactly what he shows I used the pin off of my note Android phone you can use any stylus make sure you line up those things look at them first you will see a one a two and a three make sure they're green on all three it does not say okay or you did a good job or anything you just make sure you do them in order one two and three then press the media button to get out you will get out of there worked perfect for my rhr 730n

[@JohnFraser322]

Thank you, that was very helpful and solved the problem I was having

[@notjoecheez1]

How do I find out what version my stereo is? It looks exactly like this one. The touch screen doesn’t work. Radio works though

[@TheBULLRAM]

It's actually on the face of the radio bottom right corner r e n or HR or rzb the three letters tell you what version it is

[@bedbugauthoritycanadaltd1909]

I get to the point where the yellow lines appear, but there is only 1 vertical line to the extreme right hand side of the screen. There is no horizontal yellow line. Any comments are welcome.

[@vadude21]

If I recall, you need to use your pen-tip, get in that corner, and drag.

[@richardkamadulski2104]

I had the same problem, just keep trying it till it works. Took me about six tries but i got it.

[@AD-wk6dj]

Thank you for the video. I have a 2019 and don’t have the seek buttons as a hard button they are on the screen. I tried the seek up on the back of the steering wheel with no luck. Do you know how to get to the calibration screen on a 2019 model? Thanks for any guidance.

[@BeowulfHagen]

Did you ever find a way your radio?

[@George_Gautier]

I bought one town/country and have lot of issues with touchscreen, now doesn't work at all, I replace the digitizer screen but look like I should looking for reflash

[@vadude21]

If you can reach the calibration screen at all, (black screen with the hash marks as per video) then you can likely get it functioning again. Please please PLEASE do NOT exit the calibration screen until it is set properly. If you exit before set, you will never be able to get back in again.

[@George_Gautier]

@@vadude21 Touch screen doesn´t work any more

[@George_Gautier]

Look like thats was the issue with anterior owner. I replace the screen due to my generic logic about radios but now I know this unit is tricked to lost calibration and is stored in a flash, don't even think replace OS, or HDD, Or screen. Doesn´t work at all. Good sound quality but is a crappy system about touch. I will try to discover how to flash the entire brick @@vadude21

[@JindoshDraco]

hello friend, my radio is ren and when I press the buttons that you say it doesn't send me to that screen, what else could I do to calibrate my screen, since I can't use it?

[@vadude21]

This means you are likely on the newest firmware revision, which does not allow for this command. The only way is to downgrade to older firmware, which can be done by downloading and burning to DVD. Unfortunately, you have to be able to hit the “OK” button on the screen to begin the firmware install. If you have ANY screen functionality, you may be able to touch “ok”

[@JindoshDraco]

@@vadude21 I will try it friend, but I investigated and I use the 9112 and I have not found any page where I can download it, but I also have another doubt, I was also observing that on the mygig page, they say that if you update the radio it is necessary that the hdd does not have failures, Will there be any problem if I update it to the previous one without risk?

[@JindoshDraco]

@@vadude21 ???

[@vadude21]

@@JindoshDraco sorry for my delay. I had no problem downgrading mine with the same hardware. The firmware is available online for free, but I don’t have the links available at the moment. Keep in mind, there is a prompt that appears on the screen, asking you if you wish to downgrade. If you are unable to select “yes” on the screen, you will not be able to perform the downgrade. If you attempted to calibrate previously and lost all screen control, you are stuck. If you are able to have SOME screen control, you might be able to select “yes” when the prompt appears.

[@zackiechan7895]

Anyone know where to go to buy this exact version?

[@BeowulfHagen]

Does anyone know how to do this on a 2015 430N RHB? It doesn’t have the seek buttons

[@patrickramsey7854]

I have a 2010 jeep grand Cherokee but the UBS on the radio isn’t working any help would be greatly appreciated

[@TheVista22]

Can anyone help 2011 jeep Cherokee no seek button how to calibrate?

[@dato-bm2oe]

how to check wich software i have ?

[@CapnDanTreasures]

I believe you can search through your EVIC display (Electronic Vehicle Information Center). It should be in there...

[@funnyman2436]

Mine puts me in engineering mode? It don’t put me straight into calibration mode

[@ferreira6682]

How do I go to the calibration menu for a RHB radio? I don't have the SEEK buttons on mine. Thanks!

[@stanbergey6218]

Man, I wish I had seen this before I tried mine. I did a lot of reading, but still ended up messing it up and I'm on newer software. Any way to roll it back now?

[@vadude21]

I put this together because I, too, bricked my first unit and wanted the atrocity to end. Lol. Do you have ANY screen usage at all? I’m assuming not. There’s a company somewhere who can flash 9.11 back to it. Also, I think the dealer can do the same. You can still calibrate with 9.29, but you only get one shot!

[@stanbergey6218]

@@vadude21 No screen usage. If you have the name of the company that does the reflash, that would be great!

[@BeowulfHagen]

Any update on this?

[@yosypmannyhernandez2213]

Buenas noches yo tengo una grand caravan 2008. Que quiere decir( no equipado con U-connect ) saludos espero me pueda ayudar

[@tallonyow8672]

how do i downgrade the software

[@sergioespinosa6377]

Matthew, puedes indicarme como bajar la version.....ya tengo el iso 9110...pero creo que me dara problemas dar el OK:.....graciass

[@vadude21]

Yes, hitting “ok” is the hardest part. If you are able to select “ok”, you will be able to downgrade. If your screen has no function, you will not be able to continue.

[@sergioespinosa6377]

entiendo...........pensaba que podria dar OK de otra forma.. o con los botones del volante (manubrio)

[@sergioespinosa6377]

Matthew.......Puedes tu modificar lo que se muestra en pantalla.....es decir...puedes mover el OK a otro lugar de la pantalla para poder pinchar.-...ideal seria que estuviera debajo de NO.............y asi poder acceder-.---- yo estoy mirando los archivos de actualización /ISO REZ 9111........pero no encuentro (donde se pueda leer)...donde esta la pantalla que indica SI o NO en la actualización.................-gracias por tu respuesta-

[@sergioespinosa6377]

MATT cualk es el archivo que controla la parte que sale en pantalla para dar el OK....??? es decir es uno de los archivos del cd...o esta en la radio...??......tu piedes hacer que esos "botones" YES o NO, se puedan ver Verticalmente..¡¡?????

[@amanmalik0732]

Hi, Matthew I also have the same touchscreen calibration issue but in RHR with software version 2.600. So could you help me out with this one as well. or is there any way to factory reset the whole system, bcz I have already somehow by touching here and there managed to master reset in engineering mode but that didn't work as well.

[@amanmalik0732]

or is there any video showing how to calibrate RHR?

[@neraklegion]

Entrar directo a la pantalla de calibrar en mygig REN, oprimir los botones al mismo tiempo por unos segundos: seek arriba + seek abajo + radio/media + audio (nav, supongo funciona). Entra directo a la pantalla de calibrar.

[@sergioespinosa6377]

Hola buenos días...esto es genial MATTEW .. mas de 7 años intentando arreglar el problema de mi pantalla que yo provoque...jajajajajaj... Tengo una radio REZ con versión 9.292...puedo tocar la pantalla pero todos los botones están muy juntos en una línea diagonal de no mas de 2 mm de grosor...( \ ) .y a veces es difícil dar con la acción que necesito...es muy difícil apuntarle al OK para bajar la versión-.-......funcionara con una versión del software 9.113..??

[@vadude21]

You have two choices. You can enter the engineering mode by pressing SEEK UP, SEEK DOWN, and MENU. Or, SEEK UP, SEEK DOWN, AUDIO. Once there, you will have option for the screen calibration. ONCE YOU HAVE SELECTED THIS OPTION, DO NOT EXIT UNTIL THE SCREEN HAS BEEN PROPERLY CALIBRATED as shown in my video. If you leave the screen before successful, you will BREAK your radio completely and it will no longer function. PLEASE BE CAREFUL.

[@sergioespinosa6377]

Noo, pressing SEEK UP, SEEK DOWN, and MENU. Or, SEEK UP, SEEK DOWN, AUDIO. no me lleva a la calibracion.....solo al menu ...y tengo que avanzar de hoja con los botones para llegar a la opcion Calibrated, pero ese justamente lo que no puedo encontrar los botones av pag o re pag....para seguir

[@ferreira6682]

@@sergioespinosa6377 I have the same problem, did you figured out?

[@sergioespinosa6377]

@@ferreira6682 NNOO. Aún estoy con el problema que no puedo OK al intentar bajar la versión del sw 😭

[@JindoshDraco]

​@@sergioespinosa6377Ya lo resolviste¿?

[@SergioJiménez-m2c]

Cual el conetor

[@hectorgarcia3817]

Excelente 👍

[@dhansel4835]

(Dodge RAM Laramie 1500) My Dodge RAM Laramie 1500 truck will be 7 years old on Christmas Eve. About 2 months ago I ordered a navigation map update and installed it. The installation went off without a problem. Here is the problem. When driving down the interstate at 70 miles an hour and I am in the far left lane. Every time I pass an exit the voice comes over and announces that the speed limit is 30 miles per hour. The display on the map screen changes from 70 miles per hour to 30 miles per hour. After I pass the exit it goes back to 70 MPH. I am not getting off of the exit but keep on traveling in the left lane on the interstate. I have called the map company, “Here” and told them the problem. They said it is not their problem and I need to call Dodge U-connect for a fix. I called Dodge and explained my problem. They said go to the dealership. I did and they told me to back to Dodge U-connect. I was told today when I called it was a glitch in the system. Call Tiffney 800-826-6632 X3025432 Call and complain to have them get this glitch fixed. Here I am the customer wedged between two companies and cannot get any help.