Call Me What you Want - Farm Around and Find Out

[@jamesstandridge8757]

Not cutting all of the milkweed is what I call being a good dad. I remember doing that with my kids when they were that age. Good memories. Enjoy all the time you can with them because they grow up way to fast.

[@marckimbrell4645]

Song is "Try That in a Small Town" by Jason Aldean. Love that song.

[@pauledwards3012]

If the milk weed is gone,so are the monarch butterflies

[@Tinytraveler]

What a ride its been, nearly as exciting as Between the Rows, when you guys had that terrible weather and the damage to the old garage, with all the damage to the equipment, it was heart breaking. To see the repairs, the new garage, the new grain bin, its great! Here's wishing you all the best in the construction!

[@MillennialFarmer]

It's been a giant pain but ultimately it may have been a blessing in disguise!

[@searchpei470]

good to see CatDog is around.... still has my vote for the breakout star of the summer. (sorry Jim)

[@thatcurveguy]

We need CatDog Merch

[@amanitamuscaria5284]

CatDog has my vote also, shes awesome🙂ok so is Jim but.....

[@amp710252853]

Jim still may get stuck if they actually get rain…. Love catdog

[@christopheronstott2358]

Cat dog is a cutie hope he or she can stay around for awhile!!

[@jeanlafrance8746]

What an incredible cat. Really a once in a lifetime special little catdog.

[@bricktop7803]

Yup, had that on a Ford, all the fluid is in the brake servo....or booster as you guys call it. Had that happened a couple of times, no brakes at all on a 70's Ford. You just need another brake master cylinder.

[@MegaGeorge1948]

Hi Zack. If your Scottsdale brake slave cylinders and brake lines are dry and your are still losing fluid, you may want to check the rear seal on your master cylinder where the brake push rod from the master cylinder mounts on through the vacuum power brake canister. You do this by removing the master cylinder from the vacuum canister and looking inside the vacuum canister. If there is brake fluid in it (most likely on the bottom), or the back of your master cylinder is wet with fluid, then you have found the source of your fluid loss and you will have to replace the rod seal or replace your master cylinder if it is old and crusty.

[@MillennialFarmer]

Thank you!

[@kylancook3477]

And the booster if it's been contaminated

[@mikewithers299]

​@MillennialFarmer he meant to say "old and wrinkly" 🤣

[@randysacora3684]

That is likely your problem if you have no fluid on the floor anywhere

[@MegaGeorge1948]

@@kylancook3477 Agreed.

[@Bradyn2121sports]

Amazing video keep it up

[@sleeve8651]

I worked with a Company named, " Ranch & Farms Agra Systems " out of Nebraska, I believe ? Many years ago, and we built many, a grain silo ! What you can't appreciate here, is the noise that several impact guns make while inside a silo under construction ! Brought back some good memories, from which I was many years younger ! But don't let anyone tell you it's not work ! Many long Hot days, and too short nights !

[@cudaman-yq7pq]

On the classic truck, if you're losing brake fluid but it isn't dripping onto the ground, it may be leaking back into the vacuum booster, which will eventually ruin it.

[@steveunholzer2056]

Could be inside the rear drums too

[@steveunholzer2056]

Could be inside the rear drums too

[@imhungry1778]

To add to the other posters, pulll the Vac hose to see if it's oily inside. Usually that confirms its leaking.

[@MillennialFarmer]

Screen shooting this for later. Better check into that, thanks!

[@Sicktrickintuner]

@@MillennialFarmer pull the vacuum line to the booster and check for brake fluid in there. It sometimes gets sucked into the engine

[@daboyjiggy6454]

you know its good day when you see a new video from millennial farmer!

[@dsells171]

The song you were singing was December by collective Soul.

[@AntonyMB]

Monarchs are threatened due to loss of habitat, so leaving some Milkweed is beneficial to them 👍🏻

[@beckyumphrey2626]

Great video. Awesome to see your Dad doing great with his knees.

[@Meowschitz]

It’s good to see you being nice to cat dog. I am the only farmer and rancher I know in my entire area that doesn’t have mice problems. It’s such a simple problem to fix have a couple cats. Mine even have food all day whenever they want but they still murder mice all day long!

[@justinemagson1767]

I’ll call you exactly what you are. An awesome father

[@gilbertvidana9709]

Machos, working sun up, to sun down, nice work force!!! N.P...... Gracias!

[@kingtrumpet123]

Calm and cool Catdog makes the regular dogs seem like they are hyperactive, LOL

[@barrysimmons5489]

Harvestorer silos were build using the jack process. Screw Jacks were bolted to 1st ring in concrete, tied together by drive shafts, powered by a pneumatic motor driven by a big air compressor. Glass laminated steel sheets sealed with what looked like an asphalt cement, bolted together and torqued. Worked building'em briefly during the early 60s. Largest I remember was a 35' by 85' air-tight.

[@jasonmfshow]

If your brake fluid is gone but not on the ground, it's likely inside the booster.

[@alk7142]

check the vacuum booster for break fluid. New bin is a monster.

[@adambrewer4400]

it's awesome to see how old school farmer your dad still is, heck with wasting time getting a pull tape, count the steps and know the distance, reminds me of some old farmers I know

[@joannford5860]

Exciting to see a Grain Ben going up in your yard. Thanks for sharing. It was nice to see your new shed finished and great concrete pads to put new shelves on.

[@rickwoodvine.7529]

I construct sukup and gsi grain bins back in the 90s and early 2000. We were out of Illinois and we'd go as far as north Dakota's to south of southern Mississippi. Love building them.

[@Glideslopes]

Looking good. 👍

[@daveevans2710]

Lucky Isla, you're a good Dad Zach.

[@tomrowe7534]

When I watch your program I’m reminded how easily it will be for you to 100% electric😂

[@kevinbrooks1104]

Truss , holds up the roof. Final answer truss. I feel like corn puts a heck of alot of heat in those bins. I have seen corn do some funky stuff when it green.

[@scrappy7571]

CatDog is the most awesome pet ever!

[@livingthedisneycatdream5595]

Catdog needs a go pro attached to her/him. It would be neat to see the farm from their view.

[@rawlsanderson3632]

Spraying cotton in North Carolina. Love the videos.

[@larrythompson8630]

I am only 6’ wide brush mower. New blades last year. 15’ looks like fun.

[@MarvUSA]

That looks like a really nice bin. Dam it's big. Between the rows, well, good job Onyx. Makes dad really proud for sure.

[@angelina20161]

Its awesome to finally see a new grain bin finally going up.

[@davemack7908]

In your Chevy truck, the brake fluid probably leaked out the back of the master cylinder, into the brake booster. Remove the master cylinder from the booster, and it’s probably a wet mess in there.

[@bradleymincey6905]

You are one cool and awesome dad!

[@sander3635]

That red semi is looking sharp with that buff and wheel polish you did!

[@tianyi05]

Way back (late 70's) when I was in college, worked a couple of summers putting up bins. Bigger than this one, most were 100 feet in diameter. Traveled from Illinois to Washington state, North Dakota to southern Texas. Worked sun-up to sun-down 12-14 days straight at a site, had 5-6 days off. Paid $20/hr first 40/week on the clock rest in cash. Paid for 2 years of college.

[@Libhater-PP4PM]

After seeing cornstars bin ladders and walkways falling apart, yours is really awesome 21:48 to see👍😎

[@jondoe7223]

“Don’t scream about, don’t think aloud just turn your head and baby just spit me out” December-collective soul. I love the guess the tune game

[@MillennialFarmer]

Such a good tune!!

[@dk3062]

It's not old school because it's from my youth.

[@KevinChristiansen-i2q]

Great video Zach

[@rodeastman5465]

Please thank Miss Becky for her excellent editing skills. WE love your videos. I've learned more about farming the last 2 years than I have learned from my Grandfather in 14 years. Thank you very much.

[@fonkapollo]

Have you seen the new “robots” of sorts that they have now that drive around the top of the grain inside the bin so farmers don’t need to go inside and dislodge or breakup clumps? Pretty cool tech for farmer safety.

[@davidkimmel4216]

One big bin. Thank you for sharing this with us 😊😊😊

[@deblarsen8528]

Zach.... Another great video! It's cool to watch the crew "raise" your new steel bin! Catdog is AWESOME! Anna and Didge are cool too! Until your next video ~~~Stay safe, healthy and happy! 🚜

[@Northern_Farmer]

Id like that one bin full of canola

[@701chevy9]

Check the carpet under the drivers side, as well as the firewall on the squarebody! If it's vacuum boosted make sure it didn't leak into the booster. Check the passenger side carpet as well, for a leaky heater core while you're in there.

[@scubajoe3321]

The way your so nice to those workers is nice

[@papashaq1]

You could always load the trucks facing east instead of west. That way the front truck would be filled out of the side draw and has plenty of room to pull head and/or pull out as it gets filled faster.

[@flynlr]

probably has one direction stuck in his head

[@waynejones5239]

I was thinking that if you have it to go the way the trucks normally fill then they could go the other way if needed

[@stevekegerreis1962]

Nice bin going up

[@justin-ej4ui]

Ik you guys are always busy, but I miss multi videos every week. Lol you guys are one of my favorite farmer youtubers to watch then it's larsons,welkers. Keep up the great work! From your fellow state fan cheesehead Wisconsin.

[@KevinChristiansen-i2q]

Good luck getting your bin built Zach

[@buddybresett8356]

Just keep up the good work and everything will work out.

[@codymoffatt1281]

He says "I could've been a engineer". Hilarious😂

[@dantheman164]

Love it. You connect us to our food. Such a privilege.

[@lstone.09]

Awesome video Zach. 🚜🚜🚜

[@burtbrooks7731]

Spent a many summers building them big shiny beasts!!

[@randywhelan8944]

The break fluid is inside of the break booster , now that's a fun job 😀

[@Bretagne-bm1pu]

I watch from France. See you soon.

[@stevenicoson6670]

Thanks for another great video. It was interesting and enjoyable. You new grain bin is a big one. Wow. Thanks for showing us how they build the bin and how the rings go in from the bottom up. Interesting. Good crew doing that. Will be nice when it is all done. The service work you did on the bush hog mower worked out good. Really knocks down the weeds and small brush. Your new sprayer and spray trailer work great together. Makes spraying a lot easier. Thanks for everything Zach. Really like your new bin setup. The Iowa Farm Boy. Steve.

[@RambleOnIan]

Millennial Farmer the monarch king 🦋

[@tonylawrence1814]

Newbie here..looking good on the bins..👍I like the Farm Around & Find Out 😂👍

[@ferebeefamily]

Thank you for the video.

[@seagullsbtn]

I love these videos.

[@colonialroofingofnorthcaro441]

Now you got a nice new bin to play around in, ain't that going to be fun

[@BuckMasterNorm]

thanks

[@mrbakerskatz]

You probably have the truck brake issue figured out but in case you don’t ….your brake booster is the problem , that’s where you will find the brake fluid . Fix it and you’ll be way ahead of where you were .

[@ed21690]

The one had to be stairway to heaven since you got the new up stairs on the new bin. I think it was actually the director’s cut with the impact wrench melody at the end

[@chriswhite7029]

Nice bin

[@scottyjomant6240]

Song is by Collective soul, December (spit me out). Love the videos!

[@philipthomas2452]

Love the bad jokes and dry humor 👍

[@jerrymoore-nk7tv]

I don’t know means what I think it means or I’m just stupid but either way you a HELL OF A GUY glad you’re on YOU TUBE to let everyone get to know you👍👍👍👍👍👍👍

[@phillipdickinson8557]

The new bin looks great enjoyed it was outstanding love the sprayer and the chem trailer thank you for sharing and your time was really great never miss a video thank you Zach and Becky always a great video

[@chichard86]

Woohoo! Progress on the great rebuild-shuffle!

[@ronk8325]

Mmmmm that new grain bin smell

[@jamesmartin4270]

Drive the new bin truck loading from the gravity feed in the opposite direction when loading, that should give you the separation and the truck could just drive around the bins to get out.

[@randykroells8049]

I just seen a big newer bin laying on it's side today.

[@michaelalbanese3784]

That new bin had a perfect shot gun shooting platform for throwing clays off of

[@codywinkler7230]

A little December by Collective Soul action! Nice! Looks like things are coming along halfway decent up your way!

[@schusterrides6941]

I’m 16 and I guessed it

[@admranger]

The song you were jamming to was Nessum Dorma -- the Live from Central Park version that Bocelli did. Looked like you nailed it.

[@05xlt]

I worked for a buddy’s dad over a few summers in HS building and tearing down bins. Still one of the favorite-est jobs I ever had. Our jacks were hand crank though, none of that sissy hydraulic stuff! 😂

[@floydferguson5366]

Great video!

[@schusterrides6941]

I’m 16 so I’m probably wrong but I think the song 14:20 is December by collective soul

[@timnichols9015]

Yup, bin looks all jacked up…..

[@marksmith8163]

Get 2 cones and place them out. Heck even 2 5 gallon buckets and place them where you want.

[@DonVDBorgh]

If you can't find a break leak underneath or at a wheel cylinder, take the master off & See if leaked into the booster. Good looking bin! 👍

[@hardies1]

@MillennialFarmer On your orange pickup, since the brake fluid is missing and there is no sign of external leak, it is very likely that is has all gone inside of the break booster. I would remove the vacuum line from the booster and dip something in through hole and see if it comes out wet. If it does then you know the booster failed and that is where your fluid went. You would then need to replace the booster with a new one.

[@scottmcnabb9122]

That's quite the new grain bin zach very impressive that's going to hold alot of product congrats.

[@steveddavis]

Thanks for showing how they moved the bin up.

[@GO-xs8pj]

Thanks for saving the Milkweed.

[@ChrisHarding-lk3jj]

I couldn't even count how many 1973-1987 chevy trucks I have owned throughout the years. If your truck has old or original rubber brake hoses you definitely want to replace them. The hoses always swell shut where the ends are crimped on and also where the attachment bracket in the middle is. The first thing I do when I drive any of those trucks is to start them up and put them in gear while holding the brakes. When the hoses are swollen shut there will be a delay when releasing the brakes almost like a line lock. When I cut apart the old hoses I can't even get a piece of .030 tig rod through the area with the crimp.

[@stevedrew5425]

Northern side is the shade side in the winter Thanks

[@HTTBuildingFarm8386]

great video, everything in the video is amazing

[@waynep343]

Did you see the cornstar bin failures with not enough concrete footings around the outside of the slab. The weight of the bin is on the outer foot and its not thick enough to support the bin and the weight of the grain.

[@gregjames5070]

Because cole the corn flake thought he be a general contractor Cut every corner he could and hired the absolute cheapest low rent contractors he could. He brought it all on himself. Zack is smart enough to let the professionals do it.

[@Mike7478F]

Choice. Looking good dude!!

[@cathybaschuk1285]

That’s sweet with bigger diameter bin .Good luck on your fall harvest.

[@djkremer]

Catdog cracks me up...

[@ColtynMartinson180]

Good job I love your videos

[@automandan]

Awesome video as always Zach. I bet you guys are going to be very happy when you have that new grain bin built and up and running. Also on a different note I'm glad to see Onyx really stepping up with his racing. I see him going places in the future. Keep up the awesome work.

[@trued2010]

Got some nasty storms here in hutchinson on the 19th, Hope that bin was finished, or if its not that its at least still standing.

[@chevy77rock]

3:57 The finger snaps are cool and all but now you're just showing off with the cloning 😂