CameL ADV High Exhaust T7 Install

[@wheatdevon]

A guy who beats up and test his own product is always the one you want to work with.

[@matthewjames4268]

Finally installed mine. The video was priceless. Only hang up was getting the exhaust bracket lined up for the bolt. Took some fettling. In the end, the exhaust sounds fabulous.

[@xtina818]

It's sitting at home in the box and I won't have a chance to install til the weekend. So friggin excited!!!

[@2WHEELADVLIFE]

Just installed mine. The second best product I’ve bought. 1. Camel ADV Rear Brake fix. 2. Camel ADV High Rally Bend exhaust. Accept no substitute THESE TWO product solved two huge design flaws of the Tenere.

[@CamelADV]

I'm glad they're are working well for you!

[@sidestand7586]

Such an easy install ,great thought out process 👍

[@wonkywheels1037]

Thanks. My kit should be here Monday, can't wait. I will do a review for my channel when fitted.

[@toddwmac]

Great vid. Love to be in the shop when the boss says....tear this apart, use what you can salvage and make it work! Nice job!

[@plumbercustoms6673]

Small plumbing tubing chtter is the way to do it, works perfect

[@jkarimkhani]

Can’t wait until this comes back in stock.

[@CamelADV]

It is in stock now (in limited numbers).

[@jkarimkhani]

@@CamelADV awesome! Just submitted an order. Look forward to putting this video to use.

[@jkarimkhani]

Received the exhaust today. Got it installed without a hitch thanks to your install video. I can confirm it fits well with the Touratech pannier rack. Looks great and sounds awesome! Many thanks.

[@oldgreenbus]

Just put mine on.. Outstanding Quality Amigo!! Wish I could do that kinda metal work and fab.. Solved my problem of not burning soft luggage w Adventure Spec side racks And does not melt right signal with your Camel Tail Tidy.. It’s like my T7 is wearing a Rolex..

[@07yamahamt]

Would love to see a solution for the oem Muffler or at least for the Akra so it's kind of legal in the EU because your exhaust isn't e-marked. And I don't like loud pipes either 😬

[@CamelADV]

We're working on an EU certified muffler for the kit. The included muffler is not loud at all with the db killer installed.

[@rfk76]

True. If somebody would produce a kit to move oem pipes into that high position -> instant global success. How about that Camel ADV? any chance?

[@ADVRider78]

Great idea with the zip tie!

[@elderrider9298]

Nice setup

[@ADVRaiderKTM]

Phenomenal product! You guys should create a small metal protrusion or cage for the exhaust that will protect the pipe during a fall

[@Krippztr]

if you put the cut for the cabels on the underside, wouldnt it stay in place much easier if it where to get loose? Never the less, its awesome products! Really like em.

[@JH-rs8fx]

Great design. Definitely getting one as soon as they are back in stock. Why couldn't the Japanese engineers at Yamaha figure it out?

[@rickybobby1055]

Thanks for the video. Got mine on. Sounds great. Is there suppose to be a small leak between headers and exhaust pipe?

[@MeerkatADV]

Odd question, but any reason you couldn't use the stock exhaust hanger with a Wings or other exhaust vs having to cut up the new hanger?

[@Iron_Rails]

It is my understanding that you can't use the passenger pegs with the Enduro bend. Can they be left on with this high bend once the header is installed?

[@LooseGravel14]

Muffler goes exactly where my Wolfman bags would go😅

[@TenereShorts]

Is this the update video as the link on rugged roads says private Cheers

[@richernandez9628]

Much better muffler position than stock, nice to have options. I guess you have to use a heat shield for the tail light. That's the only thing I hesitate with. I'd rather have the exhaust deflect away somewhere else. I'm just wondering if the idea of a deflector instead of a heat shield is a possiblity, or not practical.

[@comfortablyunknown700]

Ha! I was just checking this out on your site last night. Very cool. The ziptie trick is clever. Was there a final word on a spark arrestor?

[@CamelADV]

We're working on a spark arrestor. No ETA at the moment.

[@timbrownridge5022]

Got one on my world raid quality kit

[@fjsierram]

Great solution! I'm watching an OEM tail with your extra tank at the back... am I right? did you solve that mounting issue?

[@CamelADV]

We should have the new tank brackets for the OEM tail here this week.

[@Townmaking]

The Enduro bend has the same assembly process i assume? Any important advantages you can share about the two?

[@noahattaway7948]

Hey man did you happen to install the enduro end and follow this video? I’m nervous to start cutting and it not work😬

[@noahattaway7948]

*bend

[@inkslingerdrew]

i just got mine today, im curious about the cutting to...@@noahattaway7948

[@martine.6757]

Best looking high exhaust. Do you still plan to try the Wings Muffler with you link pipe?

[@CamelADV]

The issue is that 51mm is a pretty standard ID for muffler inlets so we made the link pipe that size... Wings is 50mm ID.

[@richernandez9628]

Probably can save a step and not remove the metal sleeve from the rubber bushing if it is stuck It came out in one piece. A bit of lubricant and it would go back into the new bracket without too much hassle.

[@MiguelTarin-k9l]

Is it the same process for enduro bend install or do you have a video for that exhaust install? Thanks!

[@CamelADV]

The Rally and Enduro are the same install process.

[@The_MotoRebel]

is that a chunk missing out of the swing arm? LOL

[@yuriabmxr]

Whose tail tidy is that? Does not look like my Camel one at the plate to signal bend...

[@CamelADV]

It's not a tail tidy, it's the OEM plate holder.

[@mattf8674]

Will the midpipe and bracket ever be sold as an individual kit? Can it be used with different mufflers?

[@CamelADV]

It may happen in the future. At the moment, we're just selling complete kits.

[@yt9njp]

Would this installation be possible /recommended with -40mm lowering links?

[@CamelADV]

Suspension mods have no effect on the exhaust.

[@inkslingerdrew]

My link pipe turns a good bit more than this vid, i also get some water dripping from it… not sure what to do now, hope i didnt ruin my bike cutting the old exhaust mount for this.

[@mistermoonfish]

I have heard from others that the bike should be re-tuned after a different exhaust system has been installed due to the engine feeling different back pressure. What are your thoughts regarding the bikes behavior after changing to the aftermarket system. Do you notice anything different with the bikes behavior such as fuel consumption, rough idle, etc

[@helderneves91]

This is compatible with the passenger pegs?

[@helderneves91]

Hello is this the only solution if we want to keep the passenger pegs? Saw the enduro bend but it's incompatible. Thanks

[@CamelADV]

Yes, the Rally Bend is compatible with the passenger pegs, the Enduro Bend isn't.

[@helderneves91]

@@CamelADV do you think it will work with euro 5 akrapovic?

[@AusJase]

Just needed to have started it up 👍

[@dougdunedainownerofthedoom2205]

Does the included muffler have an approved spark arrester?

[@CamelADV]

We're working on a spark arrestor. No ETA at the moment.

[@Onokyo32]

Nice!!But if i want to put bars for travel bags, will it feet?

[@maxlangelez2042]

With this exhaust is it still possible to keep the passanger footpegs and get a passanger on the bike ? No heat problem ?

[@sidestand7586]

Do you think the EU led Yamaha indicators would clear the exhaust gases without the need for the cover plate ? They are 3” long from the camel tail tidy .

[@TheHuskyGreenlaner]

I’ll answer my own question....After a few weeks without the cover over the rear led indicators , no issues with heat from the exhaust 👍

[@martyn_g]

Any issues with indicator melting? Or best get your tail tidy as well?

[@CamelADV]

The Rally bend kit comes with heat shields for the signals. The Enduro bend doesn't need them.

[@martyn_g]

Thank you, does the heat shield go fine with the stock halogen indicators, and OEM LED lights?

[@martdedub]

It's a quality setup but, (there's always a But) engineering the box so you can use the original bracket so you dont have to start chopping the Bike would be better and more accessible to the average rider.

[@jkarimkhani]

I believe they were having a problem with the OEM bracket snapping off and this kit was designed to bypass the bracket because it is prone to damage.

[@davidgrunklee8407]

Fire it up!!!! Wanna hear it.

[@jularaXD]

It is possible to install the OEM muffer with this kit?

[@CamelADV]

The OEM muffler uses a small diameter welded on link pipe, it is not compatible with this kit.

[@gabrielkopp2036]

What about factory signals

[@CamelADV]

What about them?

[@gabrielkopp2036]

@@CamelADV do you make a heat shield for the factory signal that come on the US models

[@fabiomenotti8649]

Great job, congratulations. I would like to know the diameters of the silencer and of the curve connections. I would like to use my silencer (ffbyfresco mod. Dakar) because it is approved in Italy and also the Akrapovic racing head pipe. Tell me if it is possible.

[@CamelADV]

51mm OD.

[@chukmanrider]

You are genius. But a europe not scape utility. Helpme please

[@612minigun]

Guys, please, I'm begging you, link to your products in the video description or in a pinned comment. Makin' my life harder smh I gotta go look for stuff and that's too many buttons for me to have to click

[@CamelADV]

The link is in the description, at the bottom.

[@braaaaaaaaaaap]

And no sound check. Downvote