Camera Car With Pan Tilt Control | ESP32Cam

In this video we are going to make upgraded Camera Car with Pan Tilt Control.
Using this Pan Tilt Assembly we can rotate the camera horizontally and vertically from 0 to 180 degree.
We will capture images using esp32 camera and send these images to our mobile phone using websocket through wi-fi connection.
We will control car using our own mobile app.
We have resolved some of the issues related to esp32cam with servos.
I have explained in details each step along with code.
👉 Please subscribe: kzbin.info...
👉 Components list:
✅ ESP32 Cam module amzn.to/3UIyib1
✅ Pan Tilt Servo assembly amzn.to/3fBptAO
✅ Servo motor amzn.to/3zl7MPc
✅ 4WD car kit amzn.to/3t1WcCc
✅ L298N motor driver module amzn.to/3hfLIwJ
✅ 7-12 V DC Battery (in our case lipo 2s battery) amzn.to/4cxwz0Q
✅ UBEC/Buck converter to step down voltage to 5 v amzn.to/3xB5gUv
✅ Arduino Uno amzn.to/3z97ACS
✅ Double sided tape amzn.to/3KSJdfa
✅ Jumper wires amzn.to/3heE3Pa
👉 Shorts Channel :
/ ujwalnandanwar
👉 Code and diagram:
github.com/un0038998/CameraCa...
👉 ESP32 board URL:
dl.espressif.com/dl/package_e...
👉 AsyncTCP Library:
github.com/me-no-dev/AsyncTCP...
👉 ESPAsyncWebServer Library:
github.com/me-no-dev/ESPAsync...
👉 Elevating Car
• Elevating WiFi Car usi...
👉 Camera Car
• Surveillance Car using...
👉 Wi-Fi Car
• Smartphone controlled ...
👉 Hand Gesture controlled car
• Hand Gesture Controlle...
👉 Bluetooth car
• How to make Bluetooth ...
👉 Obstacle avoiding car
• Arduino Obstacle Avoid...
👉 Arduino RC car using nrf24l01+ module
• Arduino RC car using N...
👉 Obstacle avoiding car
• Arduino Obstacle Avoid...
👉 Arduino RC car using nrf24l01+ module
• Arduino RC car using N...
👉 Watch more videos:
/ hashincludeelectronics
👉 Follow us on Instagram:
/ hashincludeelectronics
⏱Chapters
00:00 Intro
00:50 Components
01:53 Pan Tilt Servo Assembly
02:29 Car Assembly
03:20 Connections
05:14 Code Explanation
09:11 Code upload (Using Arduino Uno)
09:28 Mobile App
09:50 Car Demo
11:17 Important Points
#esp32cam #pantilt #hashincludeelectronics

[@alexfernandesportrai]

Superb Tutorial. I have tried three of your projects with great success. I am 60 years old with absolutely no background in electronics, but I love the way you simplify things. Thank You!

[@hashincludeelectronics]

Thank you very much for checking out the video and your nice comments 👍🏻👏🏻

[@lobib]

How to convert this project from AP mode to STATION MODE please help

[@simplers4519]

​@@hashincludeelectronicsVideo quality is very poor from esp cam..plz rply fast tomorrow is project submission🥲

[@SURAJKODAKANDLA]

😂😂​@@simplers4519

[@Dasol0246]

Thank you, just what I was looking for. Thanks for stepping through the code

[@hashincludeelectronics]

Always Happy to help 👍🏻👏🏻

[@RohilMShah]

@@hashincludeelectronicsHello i was making this but i am not able to download the diagram and code please please help me

[@adityanarayansingh4876]

Thank you so much.Because of you only my all projects has gone nicely

[@hashincludeelectronics]

That’s really awesome news👍🏻👏🏻

[@darcynog]

Nice improvement to your previous project, which I implemented. Now we can control what the camera shows.

[@hashincludeelectronics]

Thank you very much 👍🏻

[@otisirachi9816]

Thank you for the well written code. Very easy to understand. I love the control button and slider layout.

[@hashincludeelectronics]

Thank you very much 👏🏻👍🏻

[@TechnoShuvo360]

Amazing Friend.... Good luck...

[@hashincludeelectronics]

Thank you very much 👍🏻

[@almarezjoshuad.1382]

too many videos that i watched and this is the only one that help me a a lot it is very simple and easy to understand code

[@hashincludeelectronics]

Thank you very much for checking out the video 👍🏻 I am glad that this video helped you 👏🏻👏🏻

[@ryanbayu7738]

Thanks for the tutorial sir.. hope you are healty and became richer and happier !!

[@hashincludeelectronics]

Thank you very much 👍🏻👏🏻

[@balasubramaniamramaswamy6557]

Very nice and interesting project👏👌. Really useful one as a final year engg college project. Best wishes for many more innovative extensions to this project👍🌷.

[@hashincludeelectronics]

Thank you very much 👍🏻

[@risdiyara1]

How all price to make it?

[@gappy500]

far more worth it than buying some rc car with mounted cam, i wonder why youtubers for exploration use that instead, this is more portable and cheaper

[@hashincludeelectronics]

Thank you very much for checking out the video 👍🏻👏🏻

[@yashfu]

Bro add port forwarding using some portable router ie that old 4g jio router. So that it uses internet and it will have unlimited range (untill network goes off)​@@hashincludeelectronics

[@aritrabaidya9029]

It's more for educational purposes and also it's generally for those who want to understand the mechanism and working in order to improve or create newer ideas. U are free to look for convenience and buy a ready made one but they build it to make us understand it's working(for those who need to know it).

[@gappy500]

​@@aritrabaidya9029 it is relatively cheaper, even though looks not as cool as the rc cars with frame, but in terms of price it's a little difference cheaper, but still kind of expensive since you gotta have esp too

[@johanclaassen3584]

Thank you for the video and detailed information! I followed your instructions and was able to build this in just a few hours.

[@hashincludeelectronics]

That’s awesome 👏🏻. Happy that it worked 👍🏻👌🏻

[@rameshthapa4034]

Can u help me to build this plzzz

[@tirtowijarso7189]

Excellent , your explanation are superb !.. no single time wasted & very clear , I think about miniaturized this project into micro rc

[@hashincludeelectronics]

Thank you very much for checking out the video and nice comment 👍🏻👏🏻

[@hernansintado2989]

Thank you very much for the Project. It helped me a lot. I have two questions. 1 - In the webpage the image stuck frequently but the buttons works ok . Do you have any recommendation? 2 - The motors don’t work when I connected enA and enB to IO2. The motors only work when I connected to enA and enB to 5v. The IO2 output always is at 1.2v. Do you know why? Thank you so much . Regards Hernan

[@hashincludeelectronics]

Please check the video for important setting . Also make sure you make the connections as per circuit and shown in video 👍🏻

[@tapeface2863]

I am having the same issue, can you share how you solved it, if I connect either ena or enb, respective sides work. If I connect both, neither side works

[@chthongonzalez]

Hi! I loved the tutorial but I was wondering if I can use other pins to add some LEDs ( Im building a miniature vehicle and I need some LEDs inside ) ... How can I add them into the code that you already have? Thanks for all the tutorials ! cheers from Chile :)

[@hashincludeelectronics]

Thank you very much for checking out the video and nice comment 👌🏻👏🏻. Not sure if there are pins available on this esp32 board for LEDs . If there are pins available then you can copy paste the code for button which can be used for LEDs .

[@chthongonzalez]

@@hashincludeelectronics Thanks for the reply! Yeah I ended up connecting the LEDs directly to the battery with another switch ( with some resistors to lower the V ) :)

[@hashincludeelectronics]

@@chthongonzalez nice 👌🏻

[@RCRoads]

Awesome pan and tilt on the camera. The video quality looks great on your phone. 🏆🏆

[@hashincludeelectronics]

Awesome thank you!

[@anchorsites4158]

wonderful explanation and idea, ever best platform on the youtube ....

[@hashincludeelectronics]

Thank you very much 👏🏻👍🏻

[@omkar9940]

Can you please show how to connect metal detector and GPS module with LCD displaying latitude and longitude coordinates on it?It should show us coordinates on LCD after detecting metal.

[@hashincludeelectronics]

Looks like an interesting idea 💡

[@omkar9940]

@@hashincludeelectronics will you do this project?How much time it will take ?

[@kmhooibg7577]

best video best project, helpful🤩🤩

[@hashincludeelectronics]

Thank you very much for checking out the video 👏🏻👍🏻

[@hotwheel3089]

Thank you 👍

[@Daniel-xg4pl]

Thankyou dude... Good work.

[@hashincludeelectronics]

Awesome 👏🏻 👍🏻

[@tuillino]

now i am in a good mood

[@phucdinhviet6320]

thank you very much

[@sindusagarkamurthi7655]

Thanks for the code explanation sir.....vey necessary topic.👍👍

[@hashincludeelectronics]

Thank you very much 👍🏻👏🏻

[@sindusagarkamurthi7655]

@@hashincludeelectronics can you make a video using an ip camera and esp8266...

[@sindusagarkamurthi7655]

@@hashincludeelectronics sir , Can you make a video using esp8266 car but i should control it with my home wifi (controlling thorough internet) and an ip camera interface.. Any idea...

[@zofmod]

love it nice job bro

[@hashincludeelectronics]

Great 👍🏻

[@davydbar]

Hola, excelentes videos muy buenos proyectos y tutoriales!! Gracias

[@hashincludeelectronics]

Gracias 👏🏻👌🏻

[@Bianchi77]

Creative video, thanks :)

[@hashincludeelectronics]

Thanks a lot 👍🏻

[@Thisisnotaname-um8rh]

This youtuber has even better arduino skill than school IT teacher

[@hashincludeelectronics]

Thank you very much for your nice comment 👍🏻👏🏻

[@FixitEasyDIY]

Thank you brother! I tryed it and it works perfect! Your videos are inspiring!

[@hashincludeelectronics]

Thank you very much for checking out the video and nice comment 👍🏻👏🏻

[@VladDElectronics]

tnks!!!!!!!

[@hashincludeelectronics]

Welcome 👍🏻

[@user-qh3hs9gc7f]

this is helpfull💖💖😊😊👌

[@hashincludeelectronics]

Thank you very much 👍🏻👏🏻

[@MariusGheorgheSFilm]

Thank you! Keep up the good work!

[@hashincludeelectronics]

Thank you very much and I am glad that I could be of some help through the videos on KZbin 👍🏻👏🏻

[@sushmitham5723]

Its a good project with great explanation..i have successfully implemented the project...some of the points that have to be kept in mind for Beginners are... 1) power up the ESP 32 cam with the help of buck...the output of l298n may not be sufficient..hence the ssid may not be visible in WiFi list 2) please turn off the mobile data and then search for the ip address 3) make sure the motor speed is at minimum position and then test the car... All the best 👍

[@hashincludeelectronics]

Thank you so much for pointing out some of the findings . This will surely help others as well 👍🏻👏🏻

[@GSR-jn6th]

bro so thanks for saying this , i am also facing this problem

[@GSR-jn6th]

@@hashincludeelectronics bro can you say which type of buck converter can i use and how

[@GSR-jn6th]

Bro I connected all pins correctly it is showing inn network and all are working but the car is not moving , please give me a solution for this bro.

[@sushmitham5723]

LM2596 buck converter will work for this...if you are correct with the connection and power supply and all... atleast you will hear a feeble sound when you trigger with the mobile app If so set the motor speed to mid level in your application Hope this will help you 👍

[@crushonfoodie3167]

hye nice [project. you have the stimulate for this project

[@hashincludeelectronics]

Thank you very much for checking out the video . No I don’t have simulate for this project 👍🏻👏🏻

[@deshwanthgowdaks7471]

Thank you ❤

[@hashincludeelectronics]

Welcome 🙏

[@deshwanthgowdaks7471]

@@hashincludeelectronics Sir in this everything alright but left side dc motor not working any solution?

[@hashincludeelectronics]

@@deshwanthgowdaks7471 check the connections. Or replace the motor 👍🏻👍🏻

[@616lizzie]

👍🏻👍🏻

[@hashincludeelectronics]

👍🏻👏🏻

[@marquesmoreira6892]

Boa Noite! sou seguidor novo, sou leigo também, fiquei admirado com este projeto, fiz todo o procedimento mais não aparece a nova rede em meu celular, o que devo fazer?

[@deepjyotiarts4704]

HI BROTHER AN ERROR IS COMING THIS IS THE ERROR - No such file or directory #include "esp_camera.h" ^~~~~~~~~~~~~~ compilation terminated. Alternatives for esp_camera.h: [] ResolveLibrary(esp_camera.h) -> candidates: [] exit status 1 Compilation error: esp_camera.h: No such file or directory

[@hashincludeelectronics]

Please check the video for step to add esp32 board into Arduino IDE.

[@deepjyotiarts4704]

@@hashincludeelectronics HAVE YOU MADE ANY VIDEOS ON THAT PLEASE SEND THE LINK BRO

[@hashincludeelectronics]

@@deepjyotiarts4704 it’s should be in the same video . Or check my other video on esp32 cam car.

[@deepjyotiarts4704]

@@hashincludeelectronics Now it's compiled but it's showing some error--------- Chip is ESP32 in Secure Download Mode WARNING: Stub loader is not supported in Secure Download Mode, setting --no-stub Enabling default SPI flash mode... A fatal error occurred: Invalid head of packet (0x05) please help

[@mcwondermcwonder]

can we change the tilt fitur to something else? like to enable a sensor maybe and how can we connect the button with the fitur. Can you help me please?

[@jamesgalos]

Any tips how I can fix it I've use two l298n motor driver but it still not working

[@kumaranganesan176]

bro can we use anntena for poor connectivity problem

[@carlosmateoluisreyes3229]

I would like you to start replacing the sp32 with a Bluetooth module.👍👍👍

[@hashincludeelectronics]

This esp32 module also has Bluetooth inbuilt . You can use it easily . Check my video on Bluetooth car where I have used the dabble app to connect using Bluetooth .

[@MeanGyrene]

Can you substitute the AMB82 mini for this design? BTW your channel is great. You clearly know your stuff.

[@hashincludeelectronics]

Thank you very much for checking out the video and nice comment👍👏. Unfortunately we can not that module in this project . It will need different kind of coding and connections .

[@MeanGyrene]

@@hashincludeelectronics thank you for the quick response. Your insight is helpful.

[@samermohsen389]

Hi mrs it was a great proj. I have a one issu.. How i can change the resolution for CAM to be proper to my laptop ❤

[@kisahinspiratif007]

great tutorial.... is it can be controlled from anywhere via internet? does it have to connected into the same wifi net between car and mobile apps?

[@hashincludeelectronics]

It is controlled locally .

[@elmardasmarinas678]

Great work! impressive!! is that possible to add two or more servo motors for this project?

[@hashincludeelectronics]

Thank you very much for checking out the video 👍🏻. I don’t think there are enough pins left for more servo motors . If there is any pin left then you can use it .

[@elmardasmarinas678]

How possible to utilize PCA9865 module on ESP32 cam so it can able to drive more than two servos while driving two DC motors?!

[@hashincludeelectronics]

@@elmardasmarinas678 that’s nice idea 💡. You can try use that module and share your experience with all of us 👍🏻👌🏻

[@user-nb1sh9mv2l]

Thank you for the video and detailed information! I followed your instructions and was able to build this in just a few hours. but How can I add on/off switches and display them on a screen for remote control of the project to scale it up?

[@hashincludeelectronics]

Glad it helped!

[@rameshthapa4034]

Plzzz help me to build this..... Iam facing errorrs

[@gizmowizard352]

You have to edit the HTML code to change the layout of the app.

[@ctepler48]

Hello weird question will servos work without UBEC or buck converter but I will connect with normal jumper wires?

[@hashincludeelectronics]

UBEC or buck converter is used to step down the voltage to 5 v so that it can be provided to servos with good current capacity . This UBEC can provide upto 5 a . So you should use it . Else you need to provide other 5v power supply which can provide more than 2-3 A current . 👍🏻👏🏻

[@DHESTAR]

Thank you bro I got an IOT project expo prize for making this in January, but when I did the same project I was having some problems, the wheels rotated automatically when I connected them to the battery. What to do know

[@hashincludeelectronics]

That’s really great news . Yeah please check the power supply. Use only rechargeable battery . Check for loose connection 👍🏻👏🏻

[@veenakumari9484]

Hey bro what have u used along with ubec converter I mean to connect it to servos

[@hashincludeelectronics]

Those are just normal jumper wires

[@sauravkumarsinha7559]

Great project Esp32 ko connect kaisekare arduino se program ke liye

[@hashincludeelectronics]

Thank you very much for checking out the video and dropping a nice comment 👍🏻👏🏻. You can check my video on wifi camera car for this step 👍🏻👏🏻

[@fabriziolongo83]

Great project. Is it possible to add a label with a sensor value on a web page? If yes....how I can do it?

[@hashincludeelectronics]

Yes you can add that . May be create html element as text and send this value from esp32 using exiting websocket connection. Check the code for more reference .

[@davidjob8917]

If I add the antenna to the esp32, do I still need to add some code, I'm still kinda new to this stuff

[@hashincludeelectronics]

The same code will work 👍🏻

[@rabibocheairsoftfr8372]

i'm using arduino ide 2.3.2. pan and tilt servo don't works. i tested servos with an arduino uno, the are ok. I'm uploading with a FTDI232. i selected AI Thinker ESP32-CAM. Wich board i have to choose ?

[@hashincludeelectronics]

Please check the details in video slowly and carefully 👍🏻👏🏻. All the steps are given . Also make sure there are no loose connections.

[@vaibhavgirase9029]

I want to use relay model in that car for operate 12 volt water pump so what changes required in that program.

[@hashincludeelectronics]

You can easily add the relay in this project. I can suggest you with these points. 1. Check and Use the IO pins which is not used. 2. Add a button on the mobile App to control it. You can copy paste the button code. I can not help on full code and diagram as it needs proper complete testing and work. Wish you all the best 👍

[@christinang478]

Are there any other alternatives for the UBEC/Buck Converter and 7v-12v DC Battery?

[@hashincludeelectronics]

For servo you need to have 5v supply with enough current capacity . For 2 servos you need 1.5 A current with 5v . If you have any 5v supply with this current capacity then you can use that . However I will suggest to use the same setup which I have used in project 👍🏻

[@TicoLaurindo]

Nice project !!! What is the greatest distance the car travels? Thank you.

[@hashincludeelectronics]

Thank you very much for checking out the video 👍🏻. It can go till 50-60 ft .

[@TicoLaurindo]

@@hashincludeelectronics thank you!!!

[@TicoLaurindo]

Hello friend. Thanks again for sharing your project. I want to assemble 2 cars to play together with my son. I assembled the first one using your project, and it turned out really cool! I have a question: Is it possible to put another ssid network and another password? So I can start both cars at the same time? How do I do that? Sorry for the english... Thank you.

[@hashincludeelectronics]

Thank you very much for your comments 👍🏻👏🏻. Yes you can use any ssid and password of your choice.

[@poojakhandelwal7507]

i done the same connection and i short 5v with uno ,esp32 cam and motor driver so motor driver should not give 5v back emf but in your case its giving back emf of 5v due to this esp32 cam get damage easily i think we should give separate 5v supply to esp 32 cam?

[@hashincludeelectronics]

L298N driver has its own 5v regulator . And i believe it handles back EMF very well. I did not face such power issue with this project. You can try giving separate 5v to esp32 module.

[@ctepler48]

Hello another question, do you know why Tilt might be always looking up, like it's being told to look there no matter where I put the slider?

[@hashincludeelectronics]

May be your servo position is not initially set at mid position while mounting it on frame . 👍🏻

[@ctepler48]

@@hashincludeelectronics well that will be hard to fix. Thank you

[@explorer8970]

Can you please make detailed video on coding. Do Esp32 cam only take picture. What is the code for the picture to be made as video. Pls explain,it will be very helpful.

[@hashincludeelectronics]

I have explained the code in video as far as can. It’s very simple and you can understand by going through code step by step . It’s link is in the description of the video . Video is nothing but images displayed rapidly at regular interval called frames per seconds . You send images from camera to mobile app at regular interval and it’s displayed like a video 👍🏻hope it answers your questions . All the best

[@loganstombaugh1856]

The code provided in the description does not seem to work with Arduino even with all of the additional libraries installed. How can I correct the code to work?

[@hashincludeelectronics]

It should work . Don’t worry . Please check the video for any missing step 👍🏻👏🏻

[@darkgamedeveloper9961]

4:42 hey bro one question. what have you used to connect ubec converter to servo motors?

[@hashincludeelectronics]

Those are simple jumper wires

[@darkgamedeveloper9961]

@@hashincludeelectronics u mean you connected jumper wires to ubec converter then you connected 2 jumper wires to one to make Y shape?

[@hashincludeelectronics]

@@darkgamedeveloper9961 exactly 👍🏻

[@nihadhpk1237]

I need the same except the servo motors..can you please mention the servo motor the code lines

[@hashincludeelectronics]

There is already video on my channel without servo pan tilt . Please check 👍🏻👏🏻

[@psykopat81]

very good thank you.. one suggestion: can you make it powered with solar energy ? i mean, a car always ready to work.. But how can a 2s lipo battery be charged with solar energy? Or what should I use instead of 2s lipo? because esp32 cam consumes a lot of power ..

[@hashincludeelectronics]

I have that in list where I will make a car which is powered using solar power 👍🏻👏🏻

[@psykopat81]

​​@@hashincludeelectronicscan you share your to do list 😊

[@hashincludeelectronics]

@@psykopat81 hahah. I will share videos directly 👍🏻👏🏻

[@ranking6208]

there is an issue with the code, the video feed on the webserver is not in the right orientation, it is sideways, what should i do sir?

[@user-hs5jr9qw5m]

what will be the pins if i use aurdino uno connected to esp32 only i mean is it possible to connect pin with aurdino uno to motor driver module please say

[@hashincludeelectronics]

You have to use Arduino uno just to upload the code. Once code is uploaded there is no need to Arduino Uno . All connections will be wit esp32 cam module. Please check the video for more details.

[@siddharthvyas4695]

I want to seperate enA and enB pins which you connected to io2 port. The io4 port is currently unused. Because when ena and enb pins are connected to io2, only one side works. When Ena disconnected (right side works) when Enb disconnected (left side works) but not together

[@hashincludeelectronics]

It’s not like that . Please check the video and connections . It rotates both sides motors in reverse and forward directions👍🏻👏🏻

[@siddharthvyas4695]

@@hashincludeelectronics ya i just copied and the project works. thanks again

[@hashincludeelectronics]

@@siddharthvyas4695 awesome 🙌🏻

[@siddharthvyas4695]

@@hashincludeelectronics check my final output. the external said my project was excellent and i sould do signal processing on it to take it to next stage. drive.google.com/file/d/1iD-tGaxjNNhmKqLgKrOeLkbueMPVCTLa/view?usp=sharing

[@user-hs5jr9qw5m]

leaving... hard resetting via rts pin does it mean upload is done???

[@hashincludeelectronics]

Yes exactly 👏🏻

[@Robotix_LAB]

Hey brother 😊great job but the car is not moving what is the minimum voltage should be supplied to move the car and make the camera on with the servos

[@hashincludeelectronics]

You need to use rechargeable battery from 7-12v and then step down the voltage to 5v using voltage converter. Basically you need to provide 5v supply to this project. You can also provide 5v supply directly if you have . 👍🏻👏🏻

[@akshatt25]

Please can you make a video on how to capture and save image on laptop using esp 32 cam please please please before 18 sept or tell me via reply please

[@sabarishbabutg6519]

In this i will use l293d insted of l293n motor driver?

[@hashincludeelectronics]

In that case you will have to make the code changes and also connections . I would recommend to use L298N driver only to not face issues 👍🏻👏🏻

[@ahmedalathamneh4167]

wow great job, how is it working wirelessly with no Bluetooth?

[@hashincludeelectronics]

Thanks . It works on WiFi 👍🏻

[@regullasaidheeraj8881]

Wifi bro

[@kmhooibg7577]

Hi, how can I save image to another micro sd card module(not the one on esp32 cam)?

[@hashincludeelectronics]

This will be quite involved project 👍🏻

[@_PanchalOm]

can you tell me how and where you made the circuit diagram bcoz i want to make a circuit diagram like that

[@hashincludeelectronics]

You can use fritzing 👍🏻

[@victordreyer4689]

hi, everything look good for me. except that i don't have anything show on the website. The camera didn't displayed anything and i try to add another library, connect it again and all but i don't find any solution can i have some help ? ty !

[@hashincludeelectronics]

Please use rechargeable battery to avoid power related issue if any . Also check the video again to not miss any step 👍🏻👏🏻

[@sasangankrishnan5371]

Can you please help me with the conversion of code where we use all control button and sliders in blynk app

[@hashincludeelectronics]

I have not yet tried Blynk app for such projects 👍🏻👏🏻

[@paradoxgaming2]

It is best idea ,you make a rover

[@hashincludeelectronics]

Sure 👍🏻

[@user-hs5jr9qw5m]

is it needed aurdino uno for only uploading code or we should attached it in the car ?/

[@hashincludeelectronics]

It is just needed to upload the code 👍🏻👏🏻

[@user-hs5jr9qw5m]

@@hashincludeelectronics can not we use power bank instead of battery?? if then how to attach please answer. love from Bangladesh

[@ranking6208]

hi sir, what s that foam or tape you used to stick l298n module to chassis and also esp32 to bracket

[@hashincludeelectronics]

It’s double sided tape . You can use any glue as well 👍🏻👏🏻

[@ranking6208]

@@hashincludeelectronics thank you so much sir, may i use your code for our research paper? thank you

[@hashincludeelectronics]

@@ranking6208 yes of course 👍🏻👏🏻

[@govtjob4913]

have anyone faced the video stream freezing issue on esp32 cam while trying to use face detection

[@shreeyashsalpe2436]

What was that small component you used in the project ????

[@hashincludeelectronics]

It is called UBEC. It’s like a voltage converter from 12v to 5v 👍🏻👏🏻

[@funwithshinchan5844]

i have a issue the camera is not showing in the mobile app plz help me to solve it

[@Robotix_LAB]

Hey bro ... Amazing job with the video ..... can you tell me which part of the code should I modify to connect to external wifi rather than using the on board wifi .. thanks 😊

[@hashincludeelectronics]

Thank you very much for your comments 👍🏻👏🏻. You can check my video on “getting started with esp32 “ where I have used external WiFi . You only need to change the WiFi mode and ssid password . Please check that video 👍🏻

[@Robotix_LAB]

@@hashincludeelectronics I will check and get back to you if there are troubles

[@rameshthapa4034]

Plzz help me to build this project... I am facing errors

[@hashincludeelectronics]

@@rameshthapa4034 what issues are you facing ?

[@rameshthapa4034]

While uploading code from the Arduino to Esp32... It's showing some errors

[@nishantjoshii6947]

"ESPAsyncWebServer Library doesn't have any library" This error was shown on Arduino while compiling. And servo motor library is also not shown on the board manager. what to do ?

[@hashincludeelectronics]

Please check the video properly for all the steps of installation of board and libraries. Its very clearly mentioned in video.

[@user-hs5jr9qw5m]

how did you connect the two jumper wire into 1 enable a and enable b

[@hashincludeelectronics]

Please check the video slowly and carefully 👍🏻👏🏻

[@danielmunizrocha7367]

Very good video and great project. But I have a question, I configured as the video but after a few seconds the camera gets stuck and no longer sends video, how can I correct this error? thanks:(

[@hashincludeelectronics]

Please check the video of one setting for MAX QUEUE MESSAGE .

[@explorer8970]

What are you using to fix esp32 camera. Is it thermocol?

[@hashincludeelectronics]

Kind of . It’s actually foam board piece . You can use anything to fix camera there .

[@pushkarjaiswal4808]

Can u make a car with head tracking fpv camera

[@RanbirSingh-mc8ll]

And what is the need of using the rechargeable battery for it I want to know that because if I will no I can also think that how to manage it

[@hashincludeelectronics]

It provides sufficient current power 👍🏻

[@veenakumari9484]

Hey bro one more question - can use jumper wires instead of ubec/buck converter cuz it's hard to find and buy in India

[@hashincludeelectronics]

Jumper wires and UBEC/buck converter are totally different components. We need UBEC for converting higher voltage to 5v . Jumper wire is just a wire .

[@veenakumari9484]

@@hashincludeelectronics oh

[@ranking6208]

hello sir, one of the wheels on the back right side moves wrong, if i go forward the wheel goes backward and vice versa, what should i do sir.

[@hashincludeelectronics]

Interchange the motor wires connected to driver 👍🏻👏🏻

[@JaskaranSingh-gw2kb]

Sir the link for the Arduino uno board you give in description is a clone one. I want to ask that will it work fine with windows 11?

[@hashincludeelectronics]

Yes it will work 👍🏻👏🏻

[@JaskaranSingh-gw2kb]

​@@hashincludeelectronics So do we need to instal any driver before plugging into the pc?

[@JaskaranSingh-gw2kb]

Also can we use a 3wheel set instead of a 4wheel set?

[@hashincludeelectronics]

@@JaskaranSingh-gw2kb yes you can use 3 wheel set as well .

[@hashincludeelectronics]

@@JaskaranSingh-gw2kb connect Arduino to laptop and it will install required driver automatically I believe 👍🏻👏🏻

[@josephmunoz5273]

Hi! I have a question: How do you solved the issue of the timer? I'm doing a project where I have to control 2 servos, any suggestions? Or an example to control the 2 servos?

[@hashincludeelectronics]

I have used different timer and channel for camera . You can check that in setupCamera function . As far as controlling 2 servos are concerned, this project controls 2 servos already. Or do you want additional 2 servos so total 4 servos ?

[@josephmunoz5273]

@@hashincludeelectronics I'm using MG995 RC for this project, do you have any code that I can use?

[@hashincludeelectronics]

@@josephmunoz5273 the same code should work 👍🏻 give it a try

[@josephmunoz5273]

@@hashincludeelectronics thanks bro! I'll try. If I have any question, I'll write it in the comments

[@hashincludeelectronics]

@@josephmunoz5273 awesome

[@anandazad5764]

Bro, What is the specification of Buck converter ? my pan and tilt feature is not working ? please help

[@hashincludeelectronics]

You can buy 5v 3A buck converter 👍🏻

[@veenakumari9484]

Bro I used my esp32 cam got heat up and is no longer connecting to WiFi. Please help

[@user-ss5lp3bq2m]

Can I evaluate this work and develop it? Will you allow me to take the schematic and code and modify it for me, or will I face problems?

[@hashincludeelectronics]

Thanks for checking out the video 👍🏻 you are free to use code/diagram and modify it as per your need. No issues .it would be nice if you add some reference of hashincludeelectronics 👏🏻

[@nadirbouchouicha457]

How to to use arduino with serial communication with this project to add sensors and display their data on the web server

[@hashincludeelectronics]

Please check the video where we have used the Arduino to upload the code . Same can be used for serial monitor communication.

[@veenakumari9484]

Hey bro. GOOD NEWS my ubec converter is the same as yours. The thing is that I didn't notice that u used jumper wires to connect converter to servo. Bro did u connect them by tape or soldering?

[@hashincludeelectronics]

That’s nice . Please check the video for details 👍🏻

[@souvikdeycsit]

You can make a moon lander, please make this

[@hashincludeelectronics]

Stay tuned and you will find this video soon as well 👍🏻

[@souvikdeycsit]

Try it add a solor panel with solar tracking

[@hashincludeelectronics]

That’s a nice idea 💡