CAMERA SIDEWAYS FIX Phantom 3 Professional

If your camera and gimbal don't line up properly when you power on the P3 Pro, then you'll likely need to adjust the setscrew on the motor shaft.

[@jackh.d.kananian2609]

A little help? I'm trying this... And that part just spins when I try powering up the drone. It doesn't seem like the screw isn't catching flush against it? Is there a hole that it goes in, or just against the flat part?

[@maviekran.]

thank you so so much, i solved the problem. thanks again.

[@ranjanfernando3261]

I am confused so your saying if the shaft thing is following the gimbal arm it’s bad but if u line the shaft perfectly to that screw it will stay in one place?? Reply as soon as possible I am just mad to fix this

[@lukedungworth9814]

Cheers mate, me and my mate were in a right state when it happened ahah, it’s fixed

[@cneumann9817]

what if the shaft that the yaw arm is attached to is making the camera point left? re-calibrated IMU and everything. no luck.

[@IrfanBheenick]

C Neumann any fix?

[@reneMvalencia]

Thanks so much, you're a great help to the community. I was scratching my head trying to figure out how to get it to point the right way facing the front and not the side.

[@rickst1985]

Had a gimbal fault with my son's standard version, sent back to dji for repair and they shipped it back with this same fault. Almost shipped back for a second repair but glad i didnt! Fixed within 30 seconds. Thanks a lot 🖒

[@lindapelech9828]

This video helped me immensely,Thank you very much.

[@liamvlogs6753]

I tried to put a lot of pressure on the shaft and turn the arm but even how much pressure i applied the shaft would keep turning and never get aligned

[@jczonta]

Try to get out the gimbal and turn left the metal circle above the drone body.

[@jimmygrageda4062]

despues de muchos tutoriales, al fin uno que te da la solucioOOOOOOOOOn , infinitamente Gracias me alegraste el dia ......do you know !!!

[@aricortez1658]

Cómo lo hizo amigo, no entiendo inglés, el mío también quedo mirando para un costado. Si me podés explicar en pocas palabras, te agradezco.

[@jimmygrageda4062]

El gimbal esta sujeto al eje principal a través de un brazo en posicion horizontal dicho brazo tiene un tornillo que se ajusta al eje principal , asegurate que la posicion del tornillo coincida con la parte plana de dicho eje principal siendo asi..... el problema esta solucionado ... cual quier cosa pregunta

[@JohnSina-t1h]

Thanks bro

[@josephsargent2737]

mine is in the right position.. :/

[@geoffholloway9407]

Same

[@bat__bat]

thanks for the help on that one

[@AaronPowellvox]

thanks bro. you're a life saver! It was the same for my phantom 3 standard

[@jimmygrageda4062]

Yeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeesss

[@Beyblade_men]

Thank you it worked out for me very well

[@jczonta]

Thanks for the tip! Gimbal saved! Tks!

[@you463]

Thanks very much. Saved me $210 ! ! !

[@Lepramaniac]

Worked like a charm!! thanks a million :D

[@williampetzer4285]

Thank you Lamts

[@ericsantiago5077]

Thanks brother

[@dusekmichal]

Thank you

[@antoinegh4393]

Thanks a lot you just save my drone !

[@deepakgupta-kj6hq]

Hiii i have phantom 4 plus and getting same problam camera positions not in center

[@omersh82]

Thanks!!!!