Camera2 | Beat Saber Mod Guide

[@Raiswayy]

Hey fefe I just wanted to come back and say thank you for making my childhood on minecraft amazing with your minigame world for ps3. 🙏🏽 My friends and I had a blast many years back playing on the world. You will forever be a legend

[@FEFELAND]

Oh.. haha. Thanks for that, very much appreciate it. Good to know that the world was enjoyable while it lasted. :3

[@Hintz6]

Great tutorial thank you. Been really excited about setting up beat saber on my living room TV to have people spectating while one person plays. This tutorial will help me make the most of the desktop views. Great presentation of a lot of information!

[@FEFELAND]

Glad the video still helps people out :D The default view experience is.. not great haha. One camera can make a big difference.

[@Hintz6]

@@FEFELAND Totally agree! Thanks again

[@kinsi55]

Kinsi Seal of Approval 👍

[@epik1]

tbh the one thing i was hoping for there to be was fov because there is no more camera plus and i wanted to start recording but without my camera shaking a lot, and i know fov helps. Thank you for the video by the way keep up the good work

[@FEFELAND]

Hope it helped :D

[@epik1]

It did yes thank you

[@FEFELAND]

Curious if anyone checks out any of the charts shown as the video went.

[@PokenaPup]

Good Morning! i noticed about 12 mins in you managed to remove the background on your avatar. I may be dumb but i couldnt find any of the settings in cam2 to do this? does this require some other mod or?

[@FEFELAND]

Hi there, that's just Camera2. :D You may have missed the effects tab shown at 06:49. Though it's understandable as it's only screen for less than 10 seconds hah. In this tab I enable the "Force Depth Texture" option and set the "Transparency Threshold" to 50. (I don't have an explanation as to why, but that's what I use). Hope that helps.

[@PokenaPup]

@FEFELAND thanks so much for the speedy reply! I'll give It a go tonight! Cannot wait! You are a star for this tutorial btw. LIV was so laggy for me and constantly crashes where as this runs beautifully

[@jek2002pl]

Any idea why after installing the mod my fps drops? Im not even using any cameras beside basic one and my computer is not so bad, maybe someone else also encountered this issue

[@FEFELAND]

I'm not sure how to answer this one. Installing Camera2 shouldn't really cause any noticeable performance drop. At least not until you have a lot of cameras showing in a single scene hah. Could maybe try contacting mod dev for better help?

[@oscarburr11]

Using mod assistant ver 1.1.32 - for some reason camera 2 is no longer part of it. Manually downloaded the DLL and put it in plugins but that hasn't added it to the game either.

[@FEFELAND]

Sounds like you might be on beat saber 1.34.2. The latest release as of this comment. There's a chance Camera2 is not currently approved/tested for the version. Personally I'm still playing on 1.29.1. There's not enough mods to make me update my game yet. If you are on steam, you can right click your game, go to properties > betas > and select the legacy branch that is currently available if you want to go back.

[@buzer2011]

12:19 how do you enable transparency for the avatar camera?

[@FEFELAND]

06:49 Effects Tab Enable transparency in that tab and play with the threshold. If you'd like, also play with the 03:53 Visibility Tab to only leave the avatar or maybe avatar + sabers on the camera. Lastly, but probably not needed, could also click the render distance buttons at the bottom of the tab or manually configure the distance in the config file itself for the specific camera. Note: There's a "Facecam" preset (menu shown at 10:02) if you'd like to try it.

[@buzer2011]

@@FEFELAND Thanks for the quick and detailed response!

[@DjBlackLotus]

Hai i'm wondering how to do transparency avatar i try follow the background gone but the avatar become transparency too am i doing something wrong? 🤔

[@FEFELAND]

Just have to try and play with the settings there until it looks right. I believe for the video here at 12:19 I did the following. Under the effects tab I have: "Force Depth Texture": On/Enabled "Transparency Threshold": 50 Under the visibility tab, I probably had everything hidden except for the avatar.

[@thelastavatar111]

Awesome tutorial! May you please give me your first person x and z offset and field of view settings? I personally think your first person camera is perfect!

[@FEFELAND]

Hmm... I thought I replied to your comment but it seems it never sent. Sorry about that. My first person cameras has: Z offset of -0.5 Fov of 90. That's about it, nothing too special hah.

[@timbrown9332]

Various videos I see may show their camera switching to a different camera or angle mid song. Setting up those hot keys to switch scenes seems like my best bet to pull off the same thing. While playing a song, is it possible to have someone sitting at my keyboard so I can have them use the hot keys to switch the cameras?

[@FEFELAND]

That's totally possible as long as your game is in focus :D (click on the window) What you're asking is basically what I do on stream. People can redeem channel point rewards while I'm playing. These rewards translate to keys F2-F15 being pressed on my setup, depending on what camera people want to switch to. Side note: The way I switch cameras for my map previews here on KZbin is via video editing, not switching angles on the fly.

[@PixelDee]

This question may have been asked a lot; but how do I fix the aspect ratio on my stream? for some reason it's a box and I want it to be a rectangle?

[@FEFELAND]

Hmm, I'm not sure how to answer. Sounds to me like your game is running at a resolution that is not 16:9? It's either that or your camera is not stretched out fully on the game window. If so, just click and drag the corners out.

[@eldarh.1644]

I use questpatcher for mods but there arent any and quest patcher doesent let me put in the mods that are at github can you help me?

[@FEFELAND]

This video has nothing to do with standalone quest. Camera 2 is a mod made for the PC version of Beat Saber. If you need help modding the quest version of the game, check bsmg.wiki/quest-modding.html

[@Bookseller_]

Is there any way to rotate the positionable camera without editing the config file? I don't want my avatar in the middle of the camera view, but rather on the far left so viewers can more easily see the playfield.

[@FEFELAND]

You mean like I do at 1:50? Just point your laser at it, click and drag around. Not sure if I understood your question correctly. Feel free to try again if I didn't.

[@solt_main]

Great guide! Could you share the list of mods you use? It looks nice tbh.

[@FEFELAND]

Apologies for the late response, couldn't till now. The main "visual" mod you might notice in my main menu is "NalulunaMenu" (Which is one of the mods they have free for anyone). I used that to select the "Billie" environment in this video, though I've been using "The Weeknd" as of late. An updated list of most mods and game version I use can always be found in the "about" section of my Twitch page if you'd like to take a look. For convenience I'll post the current list here, but will be outdated in the future: Game Version: 1.29.1 AdBlocker (Removes dum promo) AudioLink BeatLeader (alternate leaderboard) BeatTogether (Multiplayer stuff) BetterSongList (Song Sorting) BetterSongSearch (The cooler search) Camera2 (Multi Cameras) CatCore (Stream stuff) Chroma (RGB lights on supported maps) Counters+ (Floor counters) Naluluna Avatars (Paid) CustomEnergyBar (MC Hearts!) Custom Notes (Acc Dot @75%) HttpSiraStatus (Overlay) DiTails (More info on song cover click) EasyOffset (Saber Offsets) Enhancements (Clock & tweaks) HitScoreVisualizer (Colored hit scores) HitSoundChanger (!hitsound) HitsoundTweaks HRCounter (Heart Rate In-game) IForgor (Saber/bloq info in pause screen) IntroSkip JDFixer MappingExtensons (Cool Map Stuff) MenuSaberColors NalulunaCat (Paid) NaluluinaDeltaBar (Paid) NalulunaMenu (Menu Music and other stuff) NalulunaRewinder (Paid) NalulunaSliceVisualizer (Paid) NoodleExtensions (Cool Map Stuff) ParticleOverdrive (Mess with particles) PauseMusic PlaylistManager (Load and Make Playlists) PPPredictor (adds in-game counter too) ReeSabers 2.0 SaberFactory (It loads .saber files!) ScorePercentage (More info on score screen) Shaffuru (Shuffle Songs) SmartSongSuggest (PP generator?) SmoothedController (Anti-Shaky Menu Hands) SongRequestManagerV2 (!bsr) TakeMeToResults Technicolor (Rainbow walls and lights) TrickSaber Tweaks55 (Useful small tweaks)

[@solt_main]

@@FEFELAND, living legend :D 6 hours is not that long imho. So all this mods work only on beta (pre-update) version? Do you have some methods to avoid dmca issues on YT and Twitch? Still don't understand why vr community has such a small audience. Cool content of many authors goes unnoticed into history.

[@FEFELAND]

@@solt_main > So all this mods work only on beta (pre-update) version? - I'm not entirely sure what works and what doesn't work post unity upgrade (1.29.4+). I check the Beatmods website every now and then (where ModAssistant pulls from) to see what shows up. I usually update my game fairly quickly to the latest version and try to throw older mods in to see if they work fine. But I haven't done that yet this time around since it was a larger change to the game. TL:DR: Some work, some might not. I'm still waiting longer to update. I don't think ScoreSaber or BeatLeader are even up yet. > Do you have some methods to avoid dmca issues on YT and Twitch? Not really. That's just the nature of playing a rhythm game and playing custom maps with popular music. "Then how do people stream on twitch and are immune?" To which I answer, oh we're not immune. Some of us simply don't care. KZbin immediately slaps you with a copyright claim, but it's usually fine. Whoever claimed it just takes the money from you is what I understand. Which, whatever it's fine. On Twitch some people delete their vods after or use the "VOD track" option to mute the game in the vod but not while live. And yeah, VR is still pretty smol in comparison hah. Either the price of entry for the tech (though.. I guess thanks meta for the cheap...er headset) or the ability for people to stomach the content. Either playing or even just watching. I've always been thankful of being immune to motion sickness, never had an issue on any game. Though one area in a modded VR game took me a sec to get used to hah. But others get sick simply watching other's VR content on a flat screen. I love VR though, it’s where I spend most of my gaming time as of late. I’ve been enjoying LOTS of modded to VR games on twitch. Need to post some of that stuff here.

[@solt_main]

@@FEFELAND absolutely love your feedback, big thanks and good luck with everything you do. Will wait for new uploads soon.

[@shatteredskies191]

Hello! I was wondering if there was a way to move the first person camera down? Right now, the closest thing I can get is to move it back and angle it downwards a bit, but it doesn't quite look the way I want it to. I know I could use a positionable camera, but I still want it to be tied to my head movement. Do you know if there is any particular reason that the z offset can be changed, but not the x or y offset? Also, my sabers seem INCREDIBLY smoothed out. Like, I can see the tips wiggle a bunch in my headset during swings, but the movements seem super smooth on my monitor. I can't find any sort of settings related to that, and I don't even know if it's from this mod. Do you happen to know what might be causing this? Thanks!

[@FEFELAND]

First question: Yes you can totally position the first person camera where ever you want. Example: 12:36 is a first person camera that has been moved. You can see it still bounces with the head. in-game it only allows you to adjust the Z offset (2:46) and the X rotation (3:01). But if you head over to your camera file under (Beat Saber\UserData\Camera2\Cameras\CamName.json) and edit the json with Notepad (or Notepad++ is my preferred) You'll be able to find "targetPos" at the bottom of the text. There you'll see the X,Y,Z values that you can set to whatever you want. You can edit while the game is running. All you have to do is save the file, click back into the game and hit "ctrl + shift + F1"(5:01) to reload your cameras. If that wasn't clear enough, feel free to send me a discord dm or something hah. Second question: Your saber that is incredibly smoothed out. I don't think Camera2 can control what your saber looks like (aside form just hiding it). Are you perhaps using ReeSabers and you have the motion smoothing option on?

[@shatteredskies191]

Thanks a lot! I wonder why that isn't an option to do from in game. I've never even heard of ReeSabers, so I guess I'll have to keep looking. I *know* my swings aren't that straight XD

[@windexisactuallyprettygood]

Im sure you probably said it and im just a bad listener but how do you start recording with positionable camera view?

[@FEFELAND]

How do you start recording? What do you mean? To record, you just need to use your preferred video capture software and capture whatever your game window is displaying. For example I use OBS or Nvidia ShadowPlay.

[@ThatBeatSaberGuy-lg8qv]

how do i download camera 2 he doesent show how i gotthe file where the hell do i extract it to i have no idea what to do can anyone help me?

[@FEFELAND]

For PC: Installing Camera2 is as easy as opening Mod Assistant (linked in description), clicking the checkbox for camera2 and hitting install like I show at 0:27. (Make sure you've run the game at least once and closed it before running Mod Assistant.) For Quest: Camera2 does NOT exist for Quest. Feel free to visit the Beat Saber Modding Discord if you require more help: discord.gg/beatsabermods

[@ps4nikolaj134]

Is there a reason my resolution looks like shit even though i turned up render scale completely and set aliasing to 8? This is only the case when i use camera2

[@FEFELAND]

Unfortunately I'm not able to give you an answer as I've never encountered this behavior. But you can try reaching Kinsi (mod author) through Discord. @Kinsi#3094 if you need the user.

[@proxpro2004]

how did you get the companion cube? is it in avatar?

[@FEFELAND]

Yes, the companion cube is part of my avi. Not a separate mod or anything like that.

[@sykosdt2673]

got any recommendations for how much smoothing i should apply

[@FEFELAND]

Not really, I believe I just use the default values and have been fine with that. It doesn't hurt to test if you'd like to play around with values yourself. You could even use the "fpfc" launch option and then watch replays or something to test out your camera settings.

[@briankilledit]

13:29 - how do you get the slice view in the bottom right corner to look like this?

[@FEFELAND]

Like I say at 12:01, it uses a transparent camera with orthographic view + one of Naluluna's patreon mods. "Naluluna Slice Visualizer". The free regular 2D "slice visualizer" has not been updated to my knowledge sadly and neither has "Dibris". But you might be able to achieve a similar effect using a new free mod released recently (though it doesn't look as good). Enable debris on your transparent camera. (Just the camera, not player options). Then with the "Debris Tweaks" mod (found on the modding discord) use these settings: Velocity Multiplier: 0 Drag: 15 Enable Gravity: off/disabled Prevent rotations: On/Enabled

[@SquareBoxHead]

how do you install the dll into beatsaber? i’m new to modding

[@FEFELAND]

For PC: Installing Camera2 is as easy as opening Mod Assistant (linked in description), clicking the checkbox for camera2 and hitting install like I show at 0:27. (Make sure you've run the game at least once and closed it before running Mod Assistant.) For Quest: Camera2 does NOT exist for Quest. Feel free to visit the Beat Saber Modding Discord if you require more help: discord.gg/beatsabermods

[@bestty5145]

I’m a bit confused about movement script I want to make the camera rotate like left to right slowly and make a loop I tied to make a script like you said but it didn’t working.so would you mind to tell me how to do it directly please ?😭🙏

[@FEFELAND]

Sorry, I can not answer in detail. You can either take a look at the movement script section on the Camera 2 wiki or you can try to tinker with my file that achieves what you ask: puu.sh/JvvHE/63d9b01ddf.json It slowly goes right to left and back.

[@bestty5145]

@@FEFELAND excuse me but where should I put it? I don’t really know how to do this stuff sorry😭🥲🙇🏻‍♂️

[@FEFELAND]

@@bestty5145 Userdata/Camera2/MovementScripts The wiki shows exactly where it goes and how to activate it in a camera... github.com/kinsi55/CS_BeatSaber_Camera2/wiki/Movement-Scripts

[@bestty5145]

@@FEFELAND thank you so much 🙏🙇🏻‍♂️

[@allcoldnochill]

How do you put the third person second cam in a precise location? lmao they got rid of the only cameraplus feature I cared about XD

[@FEFELAND]

Don't know if I fully understood the question. You can move what the third person camera sees by grabbing the white object like I do at 1:52. If you want to get *really* specific, you can manually edit the config files I mention at 4:59 You would be looking for "targetPos" and "targetRot" at the bottom of the camera you want to edit.

[@allcoldnochill]

@@FEFELAND *bottom of the textedit file, thank you very much and it was a total bitch to configure. nevertheless this is a way more gpu efficient mod so I will cuck myself to it. Maybe add u changing parameters in the text file for clarificiation? Most ppl w 3rd person cam on want to be precise.

[@Slipper.The_Avaitor_Films]

There isn't one for the quest Is there any alternitaves?

[@FEFELAND]

I think the best option for quest would be to use the replay mod which is currently available for 1.27 (latest release as of this comment).

[@Slipper.The_Avaitor_Films]

@@FEFELAND thank you very much for the reply I hope you have a amazing day

[@RAZORCRESTX]

How do you get the song to display in the bottom left corner?

[@FEFELAND]

Look for "Beat Saber DataPuller". You download the mod and you also add the overlay link to obs (or whatever you use to stream if you do).

[@RAZORCRESTX]

@@FEFELAND Thanks man, appreciate it! Very good guide! I subbed and liked

[@zskull162]

Can I move my in-game view around too? if not, do you know what mod can?

[@FEFELAND]

I show how to move positionable cameras at around 1:50. By default, you have to pause while in a song to see the white camera object. You can move first person cameras by manually editing the config files. if you meant "can I move my actual, in-headset player view", then no. Can't do that.

[@zskull162]

@@FEFELAND Yes, I meant the in-headset view. Do you know a mod that can move your view in-headset?

[@FEFELAND]

@@zskull162 There is no mod that can. Unless you want to count the different perspective while watching a scoresaber replay or the play in third person mod that I don't know if it's maintained still.

[@Aaew4ry]

Thank you :)

[@ciaranmckinlay]

how do you actually record with that camera because i use streamlabs to record and it just records how i see it

[@FEFELAND]

Are you using the OpenVR capture obs plugin/SteamVR mirror/Oculus Mirror instead of capturing the beat saber window directly? All you have to do is install camera 2 (and set it up how you want) and record the game window. For example, for videos: I just open beat saber and record with Nvidia Shadowplay. PS: I'm of the belief that people shouldn't use SLOBS. Just use normal OBS hah.

[@ciaranmckinlay]

@@FEFELAND nah where do you get the openvr capture obs plugin

[@FEFELAND]

@@ciaranmckinlay You do not need the openvr capture plugin to record camera2. That only records exactly what your player view sees and not whatever setup you have with Camera2. Also I don't believe plugins work with SLOBS but feel free to try. It's found here if you need it for something else: github.com/baffler/OBS-OpenVR-Input-Plugin/releases

[@ciaranmckinlay]

@@FEFELAND thanks

[@rock2much]

thanks!

[@FEFELAND]

Sure! :D

[@lore3169]

everytime i play a level i dont see the cubes

[@FEFELAND]

If you can't see the notes *inside* your headset as the player, then I have no clue what could be causing that hah. If you can't see the notes only on the camera, maybe you blocked the cubes from showing from the visibility tab(3:53)? Otherwise, I'm not sure what you mean.

[@Excali_]

my camera was really fuzzy how do i fix that

[@FEFELAND]

Someone else left a comment saying that their resolution looked really bad when it shouldn't. If changing the "Render Scale" setting (I use 1.3) or Anti Aliasing (I use 2) doesn't help, you might need to try contacting Kinsi on discord (@Kinsi#3094). That resolution issue is not something I'm familiar with.

[@Excali_]

@@FEFELAND thanks man

[@rissms1817]

Thank you for the guide, though it is more than a little furstrating that some of the mods you showcase are behind a paywall.

[@FEFELAND]

"some".. um... the one and only mod that fits that is Naluluna's Slice Visualizer. It's.. not my fault that they decided to have it like so... The reason I used it was because it works. I did also provide 2 other alternatives which are free, those being the normal "Slice Visualizer" and "DiBris". I actually got "slice visualizer" to work once on 1.23, but now all I get is pink blocks. Feel free to try your luck though: github.com/namaki-mono/BeatSaber-SliceVisualizer/releases/ I don't believe DiBris has been updated to work with 1.20+. I mentioned them in case they did ever get properly updated, but that doesn't seem to be the case so far. Edit: In addition, the video is a focus on Camera2. Didn't say any other mod was required. I was just showing how I am using the cameras.

[@dxrk_glitch6874]

what is ur beat saber color it looks great

[@FEFELAND]

Edit: After over a month, I've decided to remove the values. Sorry :) Ya know, usually I'm sorta protective about what my colors are exactly. But today I feel like sharing. Here you go: Left color(R,G,B): [Redacted] Right Color(R,G,B): [Redacted]

[@dxrk_glitch6874]

@@FEFELAND thx a lot I’ve been using random colors but none of them looked as good as I hoped

[@jjnether]

Can I ask how you got your main menu to look like that?

[@FEFELAND]

A mod called "Naluluna Menu" provides custom menu music and the ability to change the menu evnverionment to any of the song platforms.

[@jjnether]

@@FEFELAND ahh nice. Is there a selection of menus that come with it, or did you go somewhere else for that?

[@FEFELAND]

@@jjnether It's just using all the platforms that beat saber already has. The one in the video is from the Billie Eilish DLC. (Don't need to buy the dlc)

[@jjnether]

@@FEFELAND thanks!

[@EternalObIivion]

how do you get those lines on the walls? (the visible one)

[@FEFELAND]

Not sure I understand the question. How to turn your wall into just the outlines? Like at 4:02? Go to the visibility tab on the camera you want to edit and change the walls option to transparent. Reminder that this will only change how they look on your desktop preview. *Not* inside your headset. Edit: I do think there is a mod that makes walls transparent/outlines inside your headset called "Transparent Wall". Though I think it disables score if you enable it. Alternatively, you can disable "screen distortion effects" in your beat saber video settings to get quest walls.

[@EternalObIivion]

@@FEFELAND no i mean the walls starting at 3:58

[@FEFELAND]

@@EternalObIivion I'm still unsure on what you mean. Those are just normal beat saber walls with the distortion effects setting on. I've changed nothing about them aside from color.

[@EternalObIivion]

@@FEFELAND how do you turn on the distortion effect?

[@FEFELAND]

@@EternalObIivion This option is only available in the PCVR version of the game (Steam/Oculus), not on quest. You find it under the graphics tab in your game settings.

[@bonnie2520]

good explenation nut i stil don't know how to instal the mod

[@FEFELAND]

Copy paste from another reply: That's...... basic mod knowledge. Short version: Just like most other mods, find the .dll and throw it into the "plugins" folder inside your game install. Long version: -Go to the mod's github and find the releases section on the right. (Seen at 0:33) -Find the latest download to "Camera2.dll" under "assets". -After download, go to steam, right click your game, hover over manage and click browse local files. "I bought the game on oculus, not steam" | I'm not sure how to reach your install folder, but I'd trust you know how. - From there, find and go into the "plugins" folder. -Throw your downloaded "Camera2.dll" in there. -Once you open game, it will generate a "Camera2" folder inside "UserData" also found in your game install folder. Just in case: "But I don't have a plugins folder, should I create it?" No.. you should be using "ModAssistant" anyways to mod your game in the first place. (Seen at 0:26) Also just in case: No, this is not a Quest standalone mod. It's PCVR.

[@bonnie2520]

@FEFELAND it worked thank you! 👍

[@Vztoesss]

Does those work on quest?

[@FEFELAND]

This video has nothing to do with standalone quest. Camera 2 is a mod made for the PC version of Beat Saber. If you need help modding the quest version of the game, check bsmg.wiki/quest-modding.html

[@omegamer_0000_]

How can we set an avatar?

[@FEFELAND]

How to get avatars in Beat Saber? You can either use: - CustomAvatars (Available on ModAssistant for 1.29.1 but not on 1.34.2 I think. [as of this comment]). | Only uses ".avatar" files. or - NalulunaAvatars (There's both a free and a paid version of this one). | It can use ".vrm" and ".avatar" files. If you don't know how to set up your own models, you can browse modelsaber.com/ for public ones.

[@omegamer_0000_]

@@FEFELAND So if i play on 1.34 i cant use an avatar yet?

[@FEFELAND]

@@omegamer_0000_ I am not on 1.34.2 and don't plan to update soon so I'm not very informed. From what I see, custom avatars is not on mod assistant. Naluluna Avatars may have been updated for 1.34.2 though. I can't check currently.

[@ChuckyGamerOficial]

This mod is only for pcvr?

[@FEFELAND]

Yes, it's *only* available for the PC version of beat saber and as far as I know, no plans to have something similar on quest.

[@DarkSaber-1111]

None of this shows me how to install it manually.....

[@FEFELAND]

That's...... basic mod knowledge. Short version: Just like most other mods, find the .dll and throw it into the "plugins" folder inside your game install. Long version: -Go to the mod's github and find the releases section on the right. (Seen at 0:33) -Find the latest download to "Camera2.dll" under "assets". -After download, go to steam, right click your game, hover over manage and click browse local files. "I bought the game on oculus, not steam" | I'm not sure how to reach your install folder, but I'd trust you know how. - From there, find and go into the "plugins" folder. -Throw your downloaded "Camera2.dll" in there. -Once you open game, it will generate a "Camera2" folder inside "UserData" also found in your game install folder. Just in case: "But I don't have a plugins folder, should I create it?" No.. you should be using "ModAssistant" anyways to mod your game in the first place. (Seen at 0:26) Also just in case: No, this is not a Quest standalone mod. It's PCVR.

[@DarkSaber-1111]

@@FEFELAND ahh!!!! Not for quest. Can it be used for pc oculus then? Anything recommended for quest 2?

[@FEFELAND]

@@DarkSaber-1111 "Can it be used for pc oculus then?" If you own the game on pc (Oculus or steam) and connect your quest (with link cable/air link/ etc..), then yes, you can use it like any other mod. "Anything recommended for quest 2?" I couldn't say since I don't own a quest. If you wanted to record replays smoothly, your best bet would have been the replay mod. But I don't know that it has been updated. Scoresaber can upload quest replays that can later be viewed on the pc version of the game though. Viewing replays with scoresaber on quest is not supported yet.