Coilover Installation Made Easy! (Step by Step)

[@FahBreezyy]

Dude you have no idea how much this video helped me. Those adjustable control arms are coming IN CLUTCH for my g35

[@jesusdiaz.4951]

Can you actually feel it ??

[@FahBreezyy]

@@jesusdiaz.4951 Yes because it makes it so you can have a perfect alignment again. Without the adjustable arms youll be off and wearing the tires unevenly ect

[@JankyDubz]

@@FahBreezyy I try to explain this to people and they nah its a waste of money but it works though. I get a perfect alignment everytime now. Im not slammed but definitely lowered and it helps. Same with adjustable ball joints.

[@ProDemoHub]

Your straight to the point so good

[@alexlafreniere6573]

this is awesome. Also recommend you go get an alignment. Should always get an alignment after coilovers or any suspension work

[@decapasane]

I've heard people say going after X amount of miles... what do you recommend?

[@DeltaRc-zc9ls]

@@decapasane well i always heard to go every 6 months. But I usually go when I feel that a car leans/turns to one side by itself. I always get and recommend to get the alignment and tire balance and rotation

[@walidshahin2856]

@@DeltaRc-zc9ls seriously a rotation you definitely don’t drive a Z I can say that haha

[@spectre054]

Instant sub, this was the first video of yours I watched but I saw youve got guides for EVERYTHING. Youre the best man :)

[@ohno-fz8os]

Showed every proper step in detail 👌 much better than the 20+ other videos I've watched

[@Theromanticrejeck]

Fuck yes dude! This is probably the best coil install video because you explained how to set your ride height and didn’t just show the installation. 🙌🏻🙌🏻🙌🏻

[@MyBlueZed]

Thank you very much for the installation guide. Apart from one pesky 12 mm nut that I rounded, it all went so well.

[@br1x1dn80]

Thank you so much I’ve had my coil overs ready to go on my 2003 A4 for over a month

[@ryanwhitaker2088]

I love that you didn't waste any time with intros or shoutouts, you got straight to the point. My coilovers are coming in two days from now, this will be my instruction vid for sure! Thanks for making a solid vid 💯

[@christapia9495]

Quite possibly the best step by step guide on yt. Thanks!

[@robiot]

1:13 like that you wrote Loud on the dust over the exhaust

[@MkZoki]

Getting bc coils for my 350 this week. This is the video I needed man. Thanks for explaining how the product works👌

[@JCub316]

Did the same thing on my Z a few weeks ago but I got BC Type BR coils with the voodoo toe arms instead of KSports, I'd suggest you go to harbor freight and get a bottle jack press machine and change out all the bushings for your suspension when you get the chance. That's what I plan on doing next, new coilovers make a big difference but they feel even better with brand new bushings all around.

[@officialnicko]

So easy and straight to the point. Good job and great video!

[@kobebobby3798]

Saving this whole playlist bcz i will buy me a 350 in the future

[@DIYD_Do_It_Yourself_Dad]

Ksport coilovers are great! Ive been running them on my driftcar for years

[@lambow01]

Very very helpful Dude the best I've seen today on the adjustments lol awesome 😎😎😎😎

[@lovin_richie]

So glad I saw this before I starting this on my G35 ! Clean video

[@wespm76]

Great video dude!!! I I have some major adjusting to do on my 2008 350z coil overs. It seems the springs were compressed to lower it so it rides hard, especially in the back. The link you put in on the back when you took out the rear spring bucket, which one did you use. It wasn’t done on mine prior to me getting it. Also whenever you need to get a bolt man go to tractor supply and get a grade 8. Harbor Freight bolts are not as good of quality. Thanks for the video brother man you do a great job and I look forward to your help in the future, best to you man.

[@Streatracer99]

Unless those coilovers have progressive springs, you do adjust height by compressing the spring. Not the base adjust. Set your base height so that full compression doesn't let the wheel hit the guard, then adjust height by compressing the spring. The spring rate doesn't change just by being compressed, it's linear 👍🏻

[@youtubejunkie8053]

I was wondering about that because I've never seen anyone remove the coilover to lower the car?

[@Streatracer99]

@@youtubejunkie8053 you can still set base height with them in the car because they pivot freely at the top, so you can just spin the whole unit and screw it down into the base that way 👍🏻

[@bigmac5638]

Saving this for when I get my 370z and get coilovers.

[@Tubz1400]

Great video man!!

[@michaelsmith6524]

You just made my like twice as easy bro thank you so much I want a 350z myself and this helps alot

[@Brayyadams]

awesome video man! keep up the good work!

[@Samualninja]

Is that preload technique correct? Because a lot of other videos say to get it hand tight, then move it up 4-5mm

[@jessejameshurtadoiii9916]

Ordered coilovers for My Azera limited I'm excited Yo!!!

[@roidxn9135]

if im not wrong, shouldnt those strut bolts be a certain grade? around grade 8?

[@NorthFloridaMan]

Best tutorial on how to do this on KZbin great job guys

[@GunKata]

Great vid, super clean car! Check out upgrading your tails to the Oem leds, they look awesome

[@josueramos6121]

The best video, I have a g35

[@ahmadayyad3995]

i have made an absolutely shitty job installing these and i am ashamed, i need to redo them otherwise i will probably destroy them. thanks for the vid man

[@NoboriAuto]

Turned out good

[@mtn2byk]

I was thankful to find your video on the KSports because I just purchased them for my G35. I am not as thrilled with my purchase of the KSports as you were. For the G35 they did not come with proper mounting brackets for the brake line and nothing for the ABS sensor line. For the rear I had to supply the nuts to fasten the bottom bolts. So my experience was disappointing.

[@619ceon]

Is your g awd?

[@mtn2byk]

@@619ceon No, rear wheel.

[@619ceon]

@@mtn2byk ok. Was asking because I just picked some a few weeks ago and the front coilovers have no fork. Sitting her wondering what Am I bolting this thing to. Mines is awd.

[@mtn2byk]

@@619ceon I dont know man that sounds strange. You might look at the other mounts and brackets. If you see other problems I would return them. If you can.

[@manuelramos4608]

Should I get an alignment right after installing coilovers or when??

[@brucewayne7321]

Very good tips..thanks brother

[@trashedsti7869]

Unless you’ve got aftermarket lower control arms, I’m confused. On the car I’m working on, the sway bar end link is threaded into the lower control arm

[@llxeoxll]

Same, so tell me how you figured it out please

[@luigui707]

How have these held up after a year based on your driving style?

[@lamonthouie8675]

Needed this info... good stuff

[@jaedyndavis2208]

do you need the aftermarket control arm with adjustables?

[@liamleporati3320]

Love you vids man

[@Skate2EDM]

3:22 I'm stuck on that. its literally stuck. geez

[@diegoespin7495]

You didnt need to get new lower control arms? Wont that mess your allignment up?

[@ynegra0481]

Any update? how are they doing it? Planning to get some Ksport coilovers for my 17 Maxima right now I'm rolling with Eibach lowering spring but looking to upgrade to get a much comfortable ride, no track this is my daily.

[@gottaglouponedayyoumightaswell]

I see you ditched the duck tail lol

[@StealthEagle93GT]

Helped me so much thanks bro

[@stephensiegel66]

This video helped me out I was looking at bc's but now I'm now I'm buying ksports, but also what is the song liked it and the video as a whole

[@blxe3081]

I hav a question, why did u put new toe arms for?

[@billyegg31]

Love ur vid bro🤘

[@hmnooge2point0]

Do u need a strut mount with coilovers?

[@CriticArtist]

Solid video.. Subscribed

[@ravinforbis7333]

Do you have any issues with ground clearance

[@Stock_Crypto_Papi]

The first control arm bolt closest to the wheel shouldn't have been removed without a jack underneath, you're lucky the spring didn't shoot out.

[@billycheesestick]

Lmao yeah

[@guilhermerovida5488]

Hey man. I got some coilovers like yours. But the rear ones didn't come with the control arms to replace the stock ones. Should I buy or I can keep the stock ones without springs????

[@CameronAlford]

You can rock the stock ones without springs!!

[@Bobby3038]

Not sure if I would trust bolts from Harbor Freight. But you do you.

[@gabmax1013]

Can you leave the tool inside the coilover? Like does leaving it there affect anything?

[@elsueno6245]

I have so much bounce within the cabin.. I'm running 25 front and 20 in rear.. should I try going 18 on my damping as well? think that'll eliminate that bounce? im pretty low as well, idk if that'll make much of a difference. (fyi this is my first set up for coils.)

[@slams10]

Do I have to swap that piece out on the rear like you did with the voodoo?

[@Fry.3d]

Jesse R it’s not necessary to do so when installing Coilovers on a z but it’s recommended because once lowered it’ll give more adjustability for alignment

[@llxeoxll]

My problem is when I try to take out the bolts from the upper control arm the spring is in the way and I can’t take them out

[@volinski]

Toe arms fix the camber? Or no?

[@Luv35z]

I know I’m probably Im not gonna get a comment back but did you have a problem with the sway bar endlinks because I’m in the process of putting the fronts on but the lower control arm won’t droop down so I have to pull it down i and messed up the end link so at this point I’m stuck and I don’t know how to go about it

[@ErizeJebs]

Do you have to buy the voodoo arms to replace the rear spring bucket? or can you run it without

[@CameronAlford]

You can run it with the stock spring bucket!

[@muddyrelic3009]

Cameron Alford laughs in dark corner of room

[@carlosv9125]

@@CameronAlford so you wouldn't have to bolt that spring bucket back on correct? or you would but without the spring? and why did you decide to buy the voodoo arms knowing you can run it without it?... sorry for all the questions aha, just want to learn.

[@z33tanner]

@@carlosv9125 the arms give you more range of adjustability, lighter weight, and easier to reach in and adjust your coils.

[@alsn126]

Did you need a low profile jack for this?

[@guniarz]

Hi, how did you fit the length of coilovers in the back? Was the same length as the front ones?

[@illuminated6712]

You can adjust it as he said near the beginning of the video. You can make it shorter or longer

[@z33tanner]

Is there a reason you have your PCV venting directly to the atmosphere and not a catch can?

[@CameronAlford]

It was venting to atmosphere when I got it from the previous owner but I have installed a catch can since this video.

[@z33tanner]

@@CameronAlford Thanks for the responce 👍 just put one on my Z. Enjoying the content man.

[@justsinz9942]

Your a beast

[@francisconoriega4051]

You should of done air bags the air suspension

[@breakdownofaudy_.9196]

How'd u make the coil drop down b4 taking off the 2 top bolts?

[@dominate0711]

you spent a ton on upgrades, but cheaped out on the duckbill lol.

[@swizzy6010]

Who gives a shit

[@yobanyvalencia5871]

What’s the torque specs you used?

[@GhostedlyPVP]

Will that exact toe arm fit on a 2007 G35s?

[@alexrome16]

Are these coilovers good for daily . I run some bc coilovers and they are trash it’s so stiff to daily drive ! I need help

[@jacquesc3166]

Should have done more research before buying. If you want stiff AND daily driveable, you need to shell out thousands on Ohlins or KW v3's. Cheap coilovers will achieve the stiffness part, but you'll be bouncing and wobbling all over the place on public roads. Research research research.

[@carlosbolanos5361]

I got a question , I'm going to install coilovers on my car , do I need to rolled the fenders ?

[@PackOut23]

Not necessarily, you may depending on the offset of your wheels and how much you are dropping it

[@carlosbolanos5361]

@@PackOut23 my back wheels are 285/30/20 they look like they going to rub , I can fit 2 finger gap . I want to lower to 1 finger gap . But my fenders are not rolled

[@Hug9o]

I am very lover of that model Nissan 350z I see and see auctions for the US and I would really like to buy one of those but I don't know how, I'm from Bolivia and because I would like to know if you could help me with that.

[@lnvfx]

I hope for anyone watching, do NOT remove the spring buckets like these guys. You can pull the oem springs out without undoing both bolts. It's very simple. Removing the entire bucket will fuck up your alignment.

[@tayrussell2921]

They replaced the entire bucket bro, what are you talking about lol

[@619ceon]

Any suggestions on how I can remove a rusted bolt for the back Strut top bolts. Tried bb blaster but no luck.

[@PULSARIONequinox1]

Heat it up with a torch

[@pistolgripjoe]

my ace sucks they said they didnt have it kept telling me it a special thread

[@migzahoy]

Thats the coils i put on my nd miata

[@Jdubie]

Would I be able to put these coilovers on my 02 bmw 540i?????

[@harleycarter3982]

Info on wheel setup specs please

[@CameronAlford]

Description of wheel reveal video

[@jaystay1514]

does the voodo arms fit ojn a 7th gen maxima ?

[@timothyl3761]

I have truharts coils but do i need to replace the spring cup in the rear with rear camber arms?

[@Ajhowardz32]

Timothy L No you can use the original spring cup just make sure you take the spring out out of the cup!

[@abdimohamed7714]

What's the instrument in the background called

[@onuracbucu4935]

Adamlarda ki coilovera bak bizde ancak yok basaran amartisor yok sakirstain den yaptirak

[@0308wk]

bro did you use specific torque upon installing them ?

[@shannontrainer5857]

No, they just use whatever maximum torque the impact driver puts out.

[@seanmckenzie3143]

Is anyone else having problem with bolt for front control arm that 14mm the spring prevent rachet from gettin comepley on theit

[@arlottonick]

A garage quoted me 900 to install these.

[@Angelzenii]

greattt

[@viteshchand5373]

What is the max lowering inches

[@vally6853]

Anyone know where to get bolt torque specs?😅

[@brazeno8743]

What year is his 350

[@trickingwithjordan1708]

His is 03 mines 04

[@muddyrelic3009]

Pls don’t use rep kits🙁 they are janky

[@honkydorry7691]

You’re janky

[@CameronAlford]

hahah

[@honkydorry7691]

Cameron Alford well I didn’t think that would be the comment that got noticed XD

[@muddyrelic3009]

Cameron Alford ik its a lil much for a wing but, look into a Mercury Z ducktail barely any Z’s ive seen have this kit, everyone rocks the hype beast rb kits🤷🏾‍♂️

[@juliantorres1512]

Song?

[@maryhill4654]

I’m getting a 370Z is it a good idea for me to put these on my car?

[@LowsLifestyle]

Man I need a partner to help me😩😂

[@tonyc7248]

You back rotor is in wrong position.

[@johnmorris1632]

Dont lose that 10mm

[@josephbonocore3993]

Anti-seize all the coil over threads. U don't wanna buy new ones because everything's seized

[@jayb.4899]

nooooise!

[@MarkGutierrez_]

Who thought the box is pizza?

[@RoyalSMG]

Joe dirte