Cammed and forged 5.7 2008 charger rt Launch and flyby and testing the new nitto 555r2 drag radials

Mods are non vvt 5.7 stock bore and stroke with 11.1 wiesco drop ins with molnar rods from mmx with custom mmx cam with non mds lifters and comp springs with 6.1 hemi push rods ported stock pre eagle heads and intake with 180 t stat spector cold air intake pace setter long tubes no cats with borla 12inch oval xr1 mufflers and 2.5 exhaust pipe size also has fti 3200 stall converter and 3.06 gettrac diff and axles tuned by chicken hawk motorsports on 93oct made 391rwhp and 415tq .has 17x7 front racestars and 17x9.5 rears with nittos new 555r2 275 40 17 drag radials car been best of 12.40 @110 in 1/4 with 180 60foots and 1/8 is 7.95 @87 full weight other than race stars.

[@kendrick6387]

I’ve got an ‘07 R/T and I have to say that they have one of the best all around exhaust notes of any V8

[@jorge_herediajr]

That's great. That's all I run on mine is Nitto555G2 and R2 on race days both grip very well . Great job MN

[@456amanrocks]

That thing moves out good

[@michaelworsham6475]

Man i love this build. Are you on Instagram? I would love to get my 5.7 to run this strong. Im already running BBK long tubes, offroad mids, CAI, TB spacer and a mild tune.

[@moparmuscle304]

thanks ...i started a ig couple months ago for the channel here is the link instagram.com/moparmuscle304/

[@captainboose8788]

Hey man, sweet build, are you still running the R2s? how long did they last you? good stuff 👍

[@moparmuscle304]

thanks. i sold the car but they last good while pretty much full race season and driving it a lot but i supercharged the car before i sold it done the edelbrock 2300 ran 10.7s still was still on 93oct seen 11psi peak when i sold it made right under 640 wheel i ran the 305 45 17 nitto 555r2 drag radials on it i liked them 18 to 19.5 psi seems to be the sweet spot on those and a good smoky burn out at the track

[@captainboose8788]

@@moparmuscle304 thanks; I'm probably going to get 315 40 18 for my Demon wheels on my car 👍

[@Getmoney8762]

Wow it really moves from 55 up!!!!! I can’t wait to fix my 2008 RT check out my car on Papi Vlogs & Reviews channel

[@cityconference5130]

How much nitrous would you run on a forged 5.7 hemi

[@moparmuscle304]

depends on lot variables like compression ratio fuel etc etc ....but the quick answer is on 93oct usually up to a 100 to 150 shot depending on compression ratio.....and with race gas or e 200plus but bigger the shot your gonna need a controller of some type to ramp it in etc cause gets hard to hook up with out it from a dead stop

[@mikemcmillan4900]

Have you had it dyno tune and what it is making. Love the car wish I could do the same to mine

[@moparmuscle304]

yes right now its making 391rwhp and 415tq its prop got another 20 to 30 wheel in it if I was to do set of edelbrock heads and a eagle intake or 6.1 intake on the current set up but going to be doing a supercharger soon but dyno numbers will very dyno to dyno best test is to compare track times but there is a short dyno vid on my channel .

[@BWADaniel]

What kind of cam you got and did you put a bigger throttle body on it too?

[@BWADaniel]

Idk why I just asked that here haha, he’s not gonna see it

[@Getmoney8762]

Have you tested the quarter yet?

[@moparmuscle304]

yes it runs 12.40 @ 110 in 1/4 with a 180 60 foot and 7.95 in 1/8 full weight other than the drag set up .going to do supercharger soon gonna try get it in low 11s to high 10s in 1/4 for next year

[@bearbear1k724]

Can it still be a daily driver with the cam and headers ?

[@chrishansen7004]

Obviously yea, just depends on how big of a cam you go a cam I'd say a 212/218 cam with a 112lsa is the best daily driverable cam specs you don't need a big stall and you will go through just as much fuel as stock if your not on it and you'll get around 50HP with no low end torque losses

[@hemi255]

Where'd u get the hood?

[@moparmuscle304]

Lm performance. Amerihood brand

[@frankieguevara9807]

What was all need to run the eagle heads.

[@moparmuscle304]

I don't have eagle heads still runing pre eagle heads the stock ones just got them ported out to 6.1 ports now .but 6.1 heads would be better option .far as ez of the swap

[@frankieguevara9807]

@@moparmuscle304 could i run my 5.7 268 cam in the 6.1

[@moparmuscle304]

@@frankieguevara9807 you can but not gonna be much of a gain and it will be more of a tq cam in a 6.1 best bet would be to sale that cam and get custom grind from mmx or flying Ryan performance.

[@frankieguevara9807]

@@moparmuscle304 oh ok cool im pushing a lil over 400 with my build as of now but am looking for more power.