INSTALLATION AND SET-UP OF THE 2015 MECHANICAL GROUPSETS

[@andrewsheehy2441]

I've always ridden Campag and wil never change - have a 9-speed Veloce group set on my training bike and Chorus on the race bike. Totally love both. The original and still the best.

[@oscarlaight6493]

Got a 2015 chorus. So sweet👌

[@rockefelleragent1357]

Can I have your bike? How much will you sell it to me? I also need pictures of your bike and where are you located?

[@alkor321]

Thank you for accurate technical information to installation!!!

[@marccarp6034]

Okay I got it....gonna start on this now. I'll get back to everyone in 2 years when i'm finished!

[@SirLongshank64]

+Marc Carp lol

[@harsdensus88]

So how is it now? Lol

[@cristianogomez9174]

Best description of Compognolo group set. It would be confusing if I didn't have my "Compognolo group set" next to me insatalled on my Bianchi and pause the video as I go though the gears as described. Thanks

[@einundsiebenziger5488]

Campagnolo* - it's in the title and on every drivetrain component on your bike. Just use the very letters right in front of you!

[@dodihsupriyadih9281]

Crazy. Salaam dari Indonesia.

[@thestig6053]

«Thanks for flying with Campagnolo»

[@germangonzalez3927]

Lo mejor del mundo.👍👍👍

[@smartiepancake]

Yes but does it have a cigarette lighter

[@EveryTongue]

Great video

[@xscott902x]

It's like they took every qualm I had with the previous years models and fixed them, but now its not even like I can upgrade piece by piece. Why didn't I wait another year to upgrade my group?

[@nataphoto]

Correct torque for the break levers?

[@Gibbo263]

Is there a video for installing Athena anywhere?

[@Orgakoyd]

+Gibbo263 They're all the same.

[@RadomKidsareme000]

That bar wrap job was absolute shit! XD

[@NewEnglandDirtRoadie]

no mention of how to adjust the "b" screw on the rear derailleur that butts up against the hanger

[@Edge600X]

Exactly what I was wondering. Where is it supposed to be set?

[@NewEnglandDirtRoadie]

my GOD!!! that Bar Tape Finish was ham-fisted at best!

[@rockefelleragent1357]

Lolz

[@einundsiebenziger5488]

Way too much finishing tape, indeed.

[@mitsukiyoneda9225]

カンパニョーロは美しいですね～

[@chia-chingchou5172]

Is it right to correct "28 mm" to "28 teeth" at the scene of installing rear derailleur (jockey wheel)?

[@PInk77W1]

I have 5 Campy titanium bikes I know nothing about mechanics. I live 50 miles from nowhere. Now one of my cranksets is loose. I have no clue how to tighten it.

[@boredmartymcfly6099]

HAHAHAHAHAHAHA. L

[@elitebikeshop7420]

What tools to mount the screw code: RD-SR000EPS exchange in the body. I need to know all I need to lock the same in transeiro exchange cup.

[@Magnificafoto]

I was completely confused half way thru

[@TheFlonke88]

Campagnolo Rules

[@LazyGrayF0x]

Just got Chorus to try out and did the installation . Not used to it yet, so some initial thoughts: Why Campagnolo is assumed to be superior? Sram requires no trim, and Shimano has one trim on each chainring which makes more sense. Why trim twice on lower chainring? Agree hood shape is very comfortable, but paddle shifter is not. Have to move whole arm for that. Will see how it goes. May switch back to Shimano.

[@nunobertolo3928]

BOM TRABALHO.

[@conorfitzpatrick2632]

What torque wrench is he using?

[@arkan1960]

Why change the Campagnolo chain is so hard?

[@MOTOMOTO-fr4od]

I bought the chain security device for Braze on derailleur but It did not come with manual, tried looking without luck to find it, Can you please post the link?

[@salomonjara5361]

Los repuestos Campagnolo pueden ser muy buenos ,pero son muy caros ,y por lo mismo la mayoria ( me incluyo ) preferimps shimano ,ya que igual son buenos ,y mas economicos ,Por decirlo de otra forma ,son mas acsesibles para los simples mortales

[@methunshow]

All good stuff but it would be nice to know the size of the screws and bolts...so you know what tools you need.

[@alanwaterworth6464]

4 & 5mm allen keys, and a small (4mm) cross head or flat ended screw drivers.

[@koekkoeksklak]

What is the frame shown here?

[@Edge600X]

Looks like my Wilier Triestina

[@cenkildas1543]

How i get campagnolo mechanical man ?

[@邱雄-l7n]

could you please tell me what is backgrond music? Thanks.

[@neuregel]

you call that music?

[@邱雄-l7n]

Yes,i like this music.

[@fireline122]

Darude Sand Storm..

[@gary3353]

Call centre music ,,,, !!!!!!!!!

[@atlantikav5902]

Hell why!! It drives you nuts!

[@MrQuirinus]

O pedivela antigo era muito mais bonito, Deixou a desejar na aparência.

[@sloprun]

Please turn off the background music. It makes it difficult to concentrate on the narrator. Consider, do they play music in a classroom or in the library?

[@上村勝利-p5t]

Current crank was more beautiful.

[@silviofontana3666]

no mention of the squeaky centre bracket after about 3000km, and this music stays with you forever, squeak, squeak, squeak, I hate this on my super record, pay all this money for a noisy centre bracket

[@alanwaterworth6464]

squeaky and creaking is a common problem with all BB30 Bottom Brackets, irrespective of manufacturer; It´s caused by water / salt etc from the road getting into the bearing cups. It´s pretty easy to overhaul, clean, and regrease the bearings and cups. Doing so should solve the problem, and avoid using a power washer when washing the bike as it washes out the grease which seals the bearings.

[@brucetumblinjr7980]

Silvio Fontana if you had a threaded bottom bracket on your frame you wouldn't have that problem

[@user-uh6lm5wv6n]

I have zero bikes with bottom brackets that aren't threaded. Therefore I also have zero problems 😁

[@EveryTongue]

I was impressed until I saw how he did that bar tape.

[@U20101954]

so sram's yaw front mech is a better design

[@dbarless]

Not hardly

[@katzer3537]

The handlebar tape is so badly wrapped...

[@studiovelo4868]

That is the worst bar wrap I have ever witnessed committed by a professional.

[@rockefelleragent1357]

Too complicated. I'm losing confidence and hope to build a bike with Campagnolo grouper looks like you need a thousand dollar toolset to install...

[@killroy123]

Yup.

[@rockefelleragent1357]

@@killroy123 No the guys at bike forum said I don't have to have Campy-specific tools to install them...still....too complicated. I am trying to upgrade my bike with Campy Chorus/Record groupset soon...

[@mannygiroux3491]

It's a place to poop in the woods.

[@duncanmcgonigle8744]

Turn the music down please and fix that bartape, awful.

[@marcoalves605]

Nice looking bike but poor quality control or poor transport.Rear wheel has major issues right out of the box. kzbin.infoUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L Rear axle is bent! Derailleur is misaligned.Since the rear wheel comes assembled I would have expected better.Assembly instructions poorly written, but that was not unexpected...just annoying.I just had the bike checked at a shop and was told that I should contact the seller about getting a whole rear wheel assembly with cartridge. (The bike shop could not do anything to help me).Not a good experience with this bike, so lesson learned.Added 3 stars for excellent customer serviceUpdate Sept 8 2020Just received a complete replacement wheel for free. Great service and an otherwise fine bike.

[@mohdhelme6180]

haiz this is too much

[@marchwheeler9390]

I design and build tools for aircraft industry. Been riding road bikes 50 plus years. I've designed a unique dependable no hands shifting system for road bikes. No prototypes yet. Anybody interested. I would like thoughts and feedback.

[@marchwheeler9390]

I design and build tools for the aircraft industry. I've designed a no hands shifting system for road bikes. I would like thoughts and feedback.

[@henmich]

The problem with this company is that you have to try and pronounce Campagnolo... as a joke my buddies and I call it "Camp N Glow"

[@SuperJoobers]

Fuck it I'm sticking with sram red.

[@elitebikeshop7420]

What tools to mount the screw code: RD-SR000EPS exchange in the body. I need to know all I need to lock the same in transeiro exchange cup.