Can am maverick 1000 oil change

[@gustavocastillo698]

Excelente

[@blakepressley2258]

Looks good. Are you running any lift ? Or did you adjust your spring height ?

[@roguelegend1175]

2 inch bracket lift. I just moved up to 32" assassinators, and i had to adjust the springs to a fairly stiff position to clear those.

[@kevinhumphrey932]

If you remove the catalytic converter does it set a check engine light Thank you

[@jeffguerrini1083]

you had made a comment at the end of the video about a sport bypass plug, what is that for and is it required? what does it do for the overall speed?

[@roguelegend1175]

It allows the machine to stay in sport mode when you shift from high gear to low gear. You get to keep full power and the peppy throttle response.

[@roguelegend1175]

Its not required an it doesnt do anything in high gear or for your overall speed. It does improve smiles per gallon in low gear though.

[@catjackoff-road855]

How do you like the mudder inlaws

[@roguelegend1175]

They seem to be holding up pretty good. They're heavy but they pull good in the mud. I haven't got the chance to try a few of the other tires i like so i cant really compare them yet.

[@ZackCase]

The dog disappeared at the beginning of the video when you went towards it=O

[@roguelegend1175]

I promise he’s okay! All my dogs are obsessed with chillin’ on the trailers outside. They love riding too.

[@SnakebitenVideos]

How do you reset the display after the oil change

[@roguelegend1175]

It’s a series of mashing the accelerator down and mashing the override button. If you have your owners manual it will specify exactly how. If you dont have ill find it mine and let you know soon.

[@SnakebitenVideos]

RogueLegend Thanks

[@roguelegend1175]

hey bud. To reset the maintence light. 1. Select park 2. Turn ignition switch to ON. Do not start engine. Note: steps 3 through 9 must be completed within 5 seconds. 3. Press override switch and HOLD. 4. Press and release brake pedal. 5. Release override switch. 6. Press and release brake pedal. 7. Press overide switch and HOLD 8. Press and release brake pedal. 9. Release override switch. 10. Turn ignition switch to off. Note: do not turn ignition switch back on before the multifunction gauge turns completely off. This is the exact procedure according to my manual. My machine is a xxc model. Hope this helps. May take a few trys.

[@gunlineinc.5249]

How many hours were you at when you changed the oil?

[@roguelegend1175]

Gunline inc. sorry for no replying i do not always get my notifications. This oil change was done at 25 hours and was also the break in oil.

[@johnnygonzales3211]

Nice you make a mess on every oil change GARBAGE😜