Can-Am outlander 850 Oil Change and Service / MAX'S MOTO SHOP

In this one I did a service on the 2021 Can-Am outlander 850 if you have any questions leave them in the car is below
As an Amazon Associate I earn from qualifying purchases
Oil Filter: amzn.to/3naHyco
Can-Am Oil Change Kit 0W-40: amzn.to/40hSVgW
Can-Am Oil Change Kit 10W-50: amzn.to/3ZYrzg4
ATV Cover: amzn.to/3LcLmUh
Synthetic Winch Rope: amzn.to/3JUHgPx
TOOLS I USE!!!
DeWalt Impact/Drill Combo: amzn.to/3F0m5sF
T-Handle Allen and Torx: amzn.to/3KTHRSF
Socket Set Kit: amzn.to/41Om6d1
Bike Stand: amzn.to/3Zyig5Q
amzn.to/3ZFf34y
Tire Spoons: amzn.to/3mtIoRb
Rim Saver: amzn.to/3ZJTRKq

[@mikemason9907]

Way easier than most other's I've watched. I'm a subscriber now.

[@Maxsmotoshop]

Thanks for the sub!

[@bradnewbatt7645]

Great video - straight to the point with no boring extras! Love it

[@Maxsmotoshop]

Exactly what I was going for. Thanks for the support.👍

[@TomA-NWOntario]

I really appreciated this video. Other videos made this look a lot harder than it actually is. I think i will try to do this myself. Thank you !!

[@stephenweicikosky5240]

Same here!

[@Maxsmotoshop]

Most other videos have extra steps. This is the trick the creator uses to make the video longer. It annoyed me, and is the main reason I created my channel.

[@andrewharvey442]

You made my job so easy with this video. Thank you for making it!!

[@Maxsmotoshop]

👍 thanks for the support

[@WalkerTexasplumber]

I personally wouldn’t have covered up the oil filter yet until i ran it to make sure the oil filter cap wasn’t leaking

[@lennonkakegamic8567]

Hello. Will it show if something is wrong with the 4x4 on the screen?

[@freddyw4555]

Good one On my 570 I used to remove the floor board. A pain. I ordered a bunch of push pins from Amazon. They get brittle and caked with dirt

[@Maxsmotoshop]

I prefer not to remove the floorboard

[@Lgaribayjr]

I’m about to do my first oil change on my 2021 canam outlander 850 xmr… what oil weight do you recommend?

[@blkwng81]

What did you clean the air filter foam with? What oil did you oil it with ?

[@Maxsmotoshop]

amzn.to/4cfCqHx

[@pw760]

Is there a trick to removing the plastic push pins in the fender well so I dont break them??

[@Maxsmotoshop]

I use a pair of side cutters and pinch them. They usually pop right out.

[@JeepDude24]

Thanks for the video, I’ve seen the kits on Amazon but not sure which to use because they have different oil viscosity. I have a 2020 Can Am Outlander Max 850. Which oil viscosity would you use?

[@Maxsmotoshop]

Use 0W 40 for the winter and 10 W 50 for the summer

[@JeepDude24]

@@MaxsmotoshopThanks for quick response. Any experience with their 5W-40 synthetic blend?

[@Maxsmotoshop]

@@JeepDude24 there are a few machines that actually ask for the synthetic blend but most the time you’re better off using the fully synthetic

[@JeepDude24]

@@Maxsmotoshopmy manual gives me the option for all 3. It’s the 5W-40 blend for “General Use”, 0W-40 full synthetic for “cold weather” and 10W-50 full synthetic for “hot weather”.

[@Adventureoutdoors.]

How many quarts dose the outlander 850 take?

[@Maxsmotoshop]

The kit comes with 2 1/2 L

[@aylorsfarm2022]

does that work for my 2023 850 outlander xt?

[@Maxsmotoshop]

Yes, it does check my channel page. I have a newer video for the 2023.

[@RockinRack]

Wow every other video on KZbin says you have to completely remove all panels from one side

[@Maxsmotoshop]

Not necessary they just like to make their videos longer to put more income in their pockets. I hate that.

[@AbleDukeBoy69]

Would you recommend pouring a bit of oil into the filter before installing, like you would on a car?

[@Maxsmotoshop]

You do not oil a paper air filter no matter what vehicle it’s going on and as I said in the Video I cleaned the foam and oiled it before reinstalling

[@AbleDukeBoy69]

@@Maxsmotoshop Awesome! thanks for the response, appreciate it.

[@gregorypace5546]

What happens if a new can am 850 engine light and oil pressure light comes on and stays on until the full display comes on with 0 miles

[@Maxsmotoshop]

As long as they turn off which the machine is fully powered up or running everything should be just fine

[@hubertjones6682]

What kind of oil did he use

[@Maxsmotoshop]

This customer wanted 10 W 50, but I would recommend going with 0W 50

[@fiddlinjazz]

​@Maxsmotoshop even in a hot climate like louisiana?

[@MinecraftPlaystation]

Is the the same for a 2020 Outlander?

[@Maxsmotoshop]

Yes it is

[@MinecraftPlaystation]

@@Maxsmotoshop Thanks for the quick response!

[@hubertjones6682]

What kind of oil did he use

[@Maxsmotoshop]

Looks like we put in 10 W 50 that time but I would recommend going 0W 40

[@Icutmetal]

You didn’t watch the video?