Can-Am Outlander LED Headlight Installation With BEAMTECH Fanless LED Kits

[@BigDaddysGarage]

A two beer install. 😂 you should start rating all your installs that way!

[@northcarolinabulldogs5760]

Hey nice videos! Where you get that front bumper guard?

[@sakocat]

Great video. I put them in my. 2014 outlander. they are awesome thank. you.

[@370H55V]

How are they for distance? The housing wasn't designed for led so just wondering how well they project.

[@eddietolbert8452]

Which ones would I need for the 22 renegade xxc 1000?

[@mylescope7764]

Will it work on an older bike like 2016

[@cheesefarmer3545]

Ok I know the compatibility comment was 4 months ago, but i just got some today, somehow got free overnight shipping lol. Had to do some unholy things to the headlight assembly with the dremel to get them to fit though.

[@tdbnasc3]

It didn’t fit my 2022 outlander max xt 570. I need the H4 one. Do you think that would fit inside the headlight case?

[@isaach5391]

And also, are they different for high and low beams, or do you just order 4 of the same product? Tia

[@isaach5391]

Hello everyone, will any of the lights you described 05 and 06 and H11 will fit a 19 outlander? The website doesn’t filter to see if it would fit a certain vehicle

[@rickyherrera5610]

i can't find the 9005 size bulb its sold out. is the 9006 different?

[@nickglass6995]

How did you get all 4 lights to come on my 2020 outlander 650 only 2 come on when I use my high beams

[@mariogonzalez673]

Same here

[@danlux4954]

My 2022 has all four bulbs on when on high beam.

[@rancherochido4354]

Would these work on a 2017 renegade

[@rickv1]

Are the H11 the low beam?

[@mjl082665]

yes

[@Parkerfredman]

@@mjl082665 so I need one of each in the description

[@mjl082665]

@@Parkerfredman yessir!!

[@dreshawnbuton]

Are the high beam & low beam both 9005 or is one of them H11?

[@mjl082665]

9005 are high and H11 are low

[@butchbettynewton1902]

I have a 2022 Can Am on order. They say it will be here in March. It's a 2002 Can Am 570 DPS. On your opinion what size bulbs do you think it will take.

[@Kolsch221]

The part numbers in the description you would need two of each, Low and high beam?

[@Parkerfredman]

That’s what I am trying to figure out

[@ReefahGod]

do i gotta order 2 boxes of those lights

[@ashsmall8103]

best double sided 1/4 impact bits for edc to go along with multitool

[@michaelreed1670]

I have a 22 outlander that I purchased a few months back fully loaded and still just can’t wrap my head around why they don’t put LEDs in these machines.

[@Shadowdog-1]

Just attempted to put them on my 2023 Outlander 570 DPS and the harness is wrong.

[@alexbrito8682]

Will these fit a 2019 Can am outlander Xmr?

[@Jil1A]

Yes

[@mikestrickland342]

Do you k ow what LED bulb would fit a 2021 Outlander 570? I have tried several different led bulbs (fanless) and they do not fit. This machine has hi-lo beam all in one bulb (h4) . I have only seen one video that references an H4 bulb for these machines but they are almost $150 for a set of h4 mini bulb. Are you aware of any other options ? Thanks

[@WannabeRambo325]

Did you find any that fit your 570? I just picked up a 2021 650 XT. Looking to swap out the ugly halogens for some nice pretty leds

[@ljschaerig2134]

I got the 2021 can am outlander 450 only has the 2 bulbs can’t find any info on it did you find anything that worked

[@TheSponge945]

They let moisture in my housings fog up. You got this issue?

[@HwkyPlrs]

My stock headlight bulbs did that on both the low and high all 4 housings. Pulled them off washed with dawn dish soap, blew it dry with air compressor then used paper towel to wipe it clean on the inside. Then sealed with clear caulk and butyl tape

[@TheSponge945]

@@HwkyPlrs and if you have to replace the bulb?

[@HwkyPlrs]

@@TheSponge945 i didnt caulk the bulb I caulked the front sealed part of the housing. Thats why I used butyl tape between the bulb and housing

[@TheSponge945]

@@HwkyPlrs I am not following. the bulbs uses a gasket, you put tape there instead?

[@ronlawson5819]

Which ones go where 9005 are……and the H11

[@parmjitbrar1222]

Jil amine will they fitt to 2017 can am outlander 1000

[@Outlander_Canam_]

Which ones did you use for the video? The ones in the top link or the bottom link in the descripción???

[@Jil1A]

Both. ones for low beams and ones for high beams

[@christopherbartels7318]

Witch one is high beam and what one is low beam

[@stoneycarter7789]

I contacted Beamtech and they emailed me back and said they dont have any lights for my Outlander it is a can am 450 tho wish they did.

[@cheesefarmer3545]

Will this work on a 2020 outlander 450L? Which ones?

[@jovanjovanovic8523]

Heya, are these fogging on cold/wet weather? I have installed Osram LED in place of factory halogen but now the headlights are fogging in cold weather, idk why 🙄

[@texasandlarissawheeler9851]

How are the seals ?

[@jovanjovanovic8523]

@@texasandlarissawheeler9851 same as on original bulbs, nothing special done there, just replaced the bulb. Is it possible that the LED bulb is running colder and can't 'dry' all the condensation inside as fast as the regular bulb does?

[@natelewis7882]

Will these work on a Polaris sportsman

[@WorkshopAddict]

Beanie has makes them that will work in fanless. I do not believe it is the same models.

[@wrenchesrides]

Polaris uses an 881. Use these amzn.to/3bu6LWI

[@catwithamac2879]

God damnit does anyone do the plug and play leds

[@dodgeman1997]

Just ordered a set of v4 beamtechs. straight plug and play. Suppose to be brighter yet