Can Am Spyder, Coolant, Oil & Air Filter Change

John Covers Step by Step process for the Engine Coolant change & Air Filter change. On 2014 the Can Am Spyder, with the 1330 SE6.
Oil Change Video: • How To Do an Oil Chang...
Visit our Web Site: www.johnandmiriamstravelvlog.com
Follow up on Facebook: John and Miriam’s Travel Vlog
Please Subscribe
Gear used:
*Can Am Spyder RT SE6, 2014
*Can Am Freedom Trailer, 2019
*Trailer Hitch: Can Am Spyder Accessories.com
*Cup Holders on Spyder: Drink2go.com
*Dash and Tank Bag:
Video Gear:
*Canon EOS Rebel T6i DSLR with Rode Mic. (BUY IT NOW on Amazon) amzn.to/2y52V4P
*Go-Pro Hero 7 Black
*Go-Pro Hero 3+, with Movo VXR10 Universal Video Mic with Deadcat windscreen, Artman Protective Houseing Case with Mic mount and GoPro Pro 3.5 Mic Adapter for Hero 7 Black.
*Sena Prism Tube: HD Video Camera, Helmet mounted. (BUY IT NOW on Amazon) amzn.to/2sUAGAI
*Cyclops Gear CGX3, video camera courtesy of All Out Cycles, Chesapeake VA
*Editing software: Movie Studio 14.0 Platinum

[@dennisforster4241]

John, I don't need a Service Manual to work on my Spyder...I have YOU ! Your tutorials are Awesome !

[@rickster1430]

Great tutorial video, John. As ALL your videos are very clear and easy to follow. When our weather permits here in Illinois, I am readying myself to change the Coolant, replace the Fuel Filter, and Transmission Filter. Oil Change was completed last Fall. The season is getting closer. RIde On.......Enjoy. Thanks again.

[@SecurityisaMyth]

The Beer Bong makes its triumphant return!!

[@andrewleverich7860]

Happy that caught it in time!

[@corcoranranch]

Thanks John. Just got my "new"2018 Ltd and am busy checking and topping fluids. On the subject of plastic pushpins and their gromments, spray some white litium grease on the grommets to allow the pins to insert and part easily. Works a treat.

[@JohnMiriamsTravelVlog]

Thanks Mike, I am a bit old school. "Spit" works well also...

[@opichocal]

I just replaced the rear tire, brake pads, oil and one upper ball joint. Next is the air filter, brake fluid coolant and front tires. 23k miles of smiles!

[@paulgermain9157]

Look for the fuel filter on the right hand side of the RT. According to the maintenance manual it is located on the fuel line by a hose from the fuel tank.

[@billarwood1996]

Thanks for your instructional posts !

[@mannyg2145]

...great video, very informative👍

[@georgeherzog6366]

Very nice video John I have learn a lot . I have just purchased a Spyder rt limited and your videos have been so helpful. Im wanting to get it ready for spring soon. Thanks

[@JohnMiriamsTravelVlog]

Part of my credo: "once you reach your goal, reach back to help others".

[@kevinperry368]

Very informative video. I would humbly suggest using a cheap, Amazon sourced push pin removal tool as a much more efficient way to remove those pesky push pins. Learned this after my son wrecked his Honda CBR250R and had to remove handfuls of pins when I replaced all the damaged panels. Thanks to you and Miriam for reminding those of us who are older the importance of being screened for skin cancer. It's such an easy thing to do to prevent a very avoidable tragedy.

[@JohnMiriamsTravelVlog]

Good idea, thanks

[@monkeyman41333]

Love your channel. I am about the same age as you with hopefully about the same mechanical ability as you. You might be a little more confident than me though LOL. I have a 2013 with the 998 motor, so not sure how similar the maintenance would be. However, your video sure give me a good start. Thanks again from Canada. Still waiting for Spring.

[@JohnMiriamsTravelVlog]

Practice Practice Practice. I have to say I learned a lot form working on my own airplanes (under the direct supervision of a friend who was also an FAA certified Mechanic.) Even to the point of pulling the engines apart several times. It was much cheaper than having my a local shop do it.

[@monkeyman41333]

@@JohnMiriamsTravelVlogWell, at least if I screw up I won't have to worry about stalling at 5000 ft. LOL

[@alexlewis6497]

998 motor quite different but if you take your time it's do able. The oil change was a bit of a challenge, didn't do an air filter change I think that is well hidden on top of the motor. Did front brakes but not rear as there is a ride sensor for the rear suspension, wow did I say easy maybe not.

[@johndunlap3995]

Very helpful. Thank you.

[@auggy53]

my wife went threw the same cancer thing today . dr told her its very commen so shes waiting for the next step.

[@pauljones2857]

You would think could come up with a better design to get to your air filter like a flip panel door

[@timmiller8391]

Thanks for the good information 😊

[@fenestron100]

Also I'd like Canam to go standard on fasteners and quick release pins/ screws for the fairings.

[@JohnMiriamsTravelVlog]

It would be nice

[@opichocal]

Do you know how to adjust the belt tension without any special tools? Love the videos!

[@JohnMiriamsTravelVlog]

I do, its called a "cricket". Also, once you get used to it, you can just feel to insure its close. Great for trips.

[@johnmartell3634]

The fuel filter should be located to the right and forward of the ignition switch. You need to remove the tank cover panel to access the filter. Caution the fuel system will/maybe pressurized.

[@JohnMiriamsTravelVlog]

Thank you, I am going to do a Fall maintenance, will get it then.

[@christinewelch4843]

here in florida , we tend to be a little lazy about maintenance just because we ride all the time. Time for "us" to be more dutiful

[@Dan-rm7op]

John, I thought when you change the coolant, that you need to make sure that you don't have any air pockets in the system? Shawn Smoak mentioned that in one of his videos. Just checking. I have a 2020 RTL I did my first oil change myself but not the coolant yet because I only have 3400 miles on it. Great video John!

[@JohnMiriamsTravelVlog]

I did, but now I forgot how I did it,,,, I must be getting old. coolant level is still fine..

[@lindawiggins7532]

Ok

[@rayhjohnson]

Sorry if this a repeat. Ray and Linda from Ocala Fl. Would love to join you guys Over the 4th of July. Have you decided where on the skyline you’ll be staying.

[@JohnMiriamsTravelVlog]

No worry's Ray, Leaning towards Big Meadows. they have some rooms at the main lodge with rooms that overlook the valley,,, we did that last year.

[@spyderman49]

I have a 2013 rt-s spyder and can't figure out how to see how much coolant is in there.

[@JohnMiriamsTravelVlog]

Should be a youtube video on how to use a flashlight, holding it to the side of the container. It lights up the inside and you can see the coolant through the plastic.

[@garyallmond6535]

For removing the mirrors, have you considered the SlingMod mirror magnets? That was one of the first upgrades I made, the other being the key cover to allow me to put the key on a ring instead of the little cap. I will have to do the oil change in a few months, so I will be watching that video soon. I see that you have the K&N filter, is that the one that you clean, re-oil, and re-use like the ones in the cars (which I LOVE!)?

[@JohnMiriamsTravelVlog]

Saw some post that they can mess up instrument readings,,, I may upgrade.

[@garyallmond6535]

@@JohnMiriamsTravelVlog We have a 2017, haven't seen any indications that anything is different.

[@johnnelson8271]

I always record all your Maintenance videos for future reference. Question: Does this filter require a coat of oil prior to installation? Thanks John

[@spyderryder]

The K&N filter comes pre oiled.

[@JohnMiriamsTravelVlog]

The one in the kit does not, its not a screw on like car filter which I would lube before installing. it just sets snuggly into the receiver.

[@johndailey5973]

hello sir, what type of cellphone holder is that. Also my temperature needle is always at the top minium red line right before overheating, any suggestion on why that is.

[@JohnMiriamsTravelVlog]

We use a RAM mount, That sounds like an engine issue, let a tech look at is.

[@johnhensman41]

Coolant reservar location on a 2011 Can AM Spyder RTS-SE5 ... where is it located and which panels need to be removed. Pictures please if available.

[@JohnMiriamsTravelVlog]

Hay John, I suspect its just behind the Fuonk, on mine (1330 engine) just remove a small panel on the right side between the Frunk and head light assembly.

[@alexlewis6497]

Thanks John, I'm like you like to tinker and do my own maintenance, this gives me hope to be able to do the 2019 maintenance when required. On the push pins I've seen white silica grease used. Why did you go with K&N filter was it the OEM specific?

[@JohnMiriamsTravelVlog]

It was a Lamonster recomendation, good idea on the silica, need to get some,

[@RogDawg]

@@JohnMiriamsTravelVlog I am new to Spyder ownership. I see by your licence plate you are in Virginia. I am in Chesterfied, how can I talk to you?

[@JohnMiriamsTravelVlog]

@@RogDawg Just shoot me a Facebook message.

[@stikupartist3698]

Where does the skinny hose from the reservoir go?

[@JohnMiriamsTravelVlog]

which reservoir?,

[@stikupartist3698]

@@JohnMiriamsTravelVlog the coolant reservoir.

[@mariofortier6899]

did you also change the transmission. filter oil change at 40000 km the part in quebec is around 120$

[@JohnMiriamsTravelVlog]

That is a good price

[@mariofortier6899]

i meant the transmission filter a little piece in plastic

[@JohnMiriamsTravelVlog]

Now you got me worried. I need to go back and look.

[@fanom1]

Hi...any issues with air in the cooling system after the coolant change? Did you use a flush first or not?

[@JohnMiriamsTravelVlog]

No, and I was concerned about that. I had that happen when I did the flush on my SUV. I just drained and refilled. works good

[@fanom1]

Good info..I saw you used OEM coolant...was this the 2 year or longer coolant...mine looks to be a pinky color...are there any after market coolants as good?

[@scottharrington884]

How many miles did the air filter have on it and did it look dirty?

[@JohnMiriamsTravelVlog]

It must have been the lighting, it looked ok from my view. It had 23,000 on the filter.

[@jaclynmelton1890]

What is the service manual you are using?

[@JohnMiriamsTravelVlog]

I downloaded the BRP manual.

[@fenestron100]

i livee in a hot country and i find it gets very hot on legs when im stopped , was thinking of water free gel coolant, anyone any thoughts? thanks

[@JohnMiriamsTravelVlog]

I just got one. Its awaiting some hot weather for a test and a video review.... Take care

[@fenestron100]

@@JohnMiriamsTravelVlog Thank look forward to it, the Canam rep, here in Cyprus east meditterranean tends toward Canam policies and directives.

[@fenestron100]

Thanks interested in the result, stay safe. @@JohnMiriamsTravelVlog

[@rickbeardsley8057]

This foolishness is why Harley Davidson is sold so much. About a five minute job on a Harley. And that's if you don't have a screwdriver.

[@rickster1430]

Really not foolishness if you are not able to ride a 2 wheeler and enjoy the wind in your face. But like any "toy" it has its perks, or quirks. Be it good or bad to keep it going. Nothing is maintenance free. We do what we do.......to ride and enjoy the great outdoors. Ride On!

[@mannyg2145]

I rode a 2 wheeler for 18 years, I’m 69 and have bad knees and back. I want to keep riding and the Spyder is a welcome alternative. A lot of HD riders seem to think that HD is the only bike worth having, to each his own.