Can Art Clay Copper be torch fired? Yep!

[@ashleyszyszkowskiashspract7153]

You are an amazing teacher! I just received my first pack of copper clay in the mail today. I don’t have a kiln, but I have a torch. Thank you for making this video:)

[@BlueDotJewelry]

Thank you! I'm happy to hear you think so. Have fun with your copper!

[@2degucitas]

Those vintage 70's-80's coffee mug heaters are so handy for crafting. I use mine for so many things: melting lipsticks (in a metal cup) for rebatching, "brewing" vanilla extract (vodka+vanilla pods in closed mason jar). So many possibilities.

[@BlueDotJewelry]

That's so interesting to hear. I've never heard anyone actually use them to warm a mug. But they are handy! I use this one every day for this purpose and as you might be able to tell, it's been going for many years. Love it.

[@MsTJPink]

I've been thinking about getting into silver art clay for a while, I love to find videos that teach, not just show you the start and the end. Thank you for this video, it was really informative and one I will refer back to.

[@BlueDotJewelry]

I really appreciate knowing that you found this helpful. Wishing you well on your making journey!

[@SHRUGGiExyz]

I suspect the issue you ran into with reconstituting your clay could be due to the inclusion of tiny amounts of dissolved minerals found in tap/bottled water. These minerals likely wont burn out and would leave a microscopic sprinkling of mineral particles inside the piece, which could definitely cause structural issues. Try using distilled water and see if you get better results! You may also want to try using a pair of tight fitting rubber gloves, as oils from your hands could be getting into and impacting the clay. Finally, with copper specifically, since it does oxidize plenty compared to silver, I would suggest either clear coating finished pieces so they dont leave your skin green. You might also be able to get a lovely bright-silver result with a simple nickel plating bath, which is much more tarnish resistant than bare copper. Overall, great video demonstrating this material as compared to silver clay!

[@BlueDotJewelry]

Interesting. I'm open to the idea of oils or minerals causing these effects, and yet I would be shocked that those same factors during the same methods don't impact silver clay in almost any comparable way. But this is the point of confirming that the two operate differently. Things to be tested. Thank you for sharing your thoughts!

[@stephss]

I'm a welder, and YT Algo sent this my way. Totally fascinating. Thanks!!!!

[@BlueDotJewelry]

That's awesome to hear. Thanks for telling me this!

[@KorbeSings]

Oh my god I love your tiktoks, I’m so glad to know you’ve got long form content here! Your educational resources for the metal clays are so helpful. Ive done polymer clay but want to branch out. I am excited to take the plunge into metal clay soon, and I’m so grateful to feel confident about what I need after watching your stuff!

[@BlueDotJewelry]

I'm so happy they feel helpful! And that you feel like you're setting up for success. Thank you for letting me know :)

[@Phoenixbooth13]

This is so absolutely helpful!! Thank you!! Glad to watch your long form content!!

[@BlueDotJewelry]

I'm so glad to hear it's helpful! Thank you for watching x

[@viv5645]

This was really fascinating, thank you so much! Your first attempt with the torch seemed to be too cold, but I believe you got the colour and temperature correct when torch firing the second time. I have been happy with results achieved after reaching the salmon pink glow and maintaining it for the full 7 minutes. I have also had problems which your video has helped me to troubleshoot further. I use Sherri Haab's PasteMaker instead of water, applying it directly with a brush for really strong connections and diluted with distilled water if I need to make a paste. It works for mending broken pieces, before and after firing. It is not strong until it is fired so care is needed. I love your work and your videos, I learn so much, thank you again.

[@BlueDotJewelry]

Too cold and not for long enough, definitely. That's all great to hear, thanks for sharing and letting me know the helpfulness of the content. Good to hear you find the Paste Maker effective! I'll have to try that.

[@whatevernamegoeshere3644]

19:32 That is the same oxide thickness rainbow you get from iron too :D You can actually tell the temperature from that accurate to right around 5-50C depending on the colour. The purple is only like a 3-5 degrees window Also I have never heard of metal sinter clays before, it was really exciting to watch!

[@BlueDotJewelry]

Fascinating! I'm going to read more about this. Thanks for sharing.

[@michaelbuchholz2164]

Nice! Didn't hear about this clay before. 😊

[@AndrewAhlfield]

This is a wonderful and delightfully insightful video! I enjoyed your discussion of the subtleties even though I'm just a casual watcher and not in this space. :D

[@BlueDotJewelry]

I appreciate this SO much! xx

[@bluejin138]

Thanks 🙏🏻 for all the wonderful information ℹ️💜💜💜💜🩶🩶🩶

[@kimmie44]

Thank you so much for the well explained vid!!! 🌹

[@stay_curious]

This is such an amazing video!! Thank you so much for this ❤❤❤

[@BlueDotJewelry]

You're so welcome. Thanks for watching!

[@guntisgraudins5822]

Thank you for the video :)

[@chemistryofquestionablequa6252]

This can be really useful for the amateur energetics community too!

[@BlueDotJewelry]

There is so much to explore here!

[@roderos]

Thank you for the video! Very informative. Do you think copper would be a good alternative to silver clay to start learning the art at a lower cost?

[@BlueDotJewelry]

To work with, I'd say yes. Between the two though, I think the results of firing silver are far more consistent!

[@petals_kelly]

I love the mice ❤ what are you sitting the piece on, in the bowl ( in the kiln ) are you able to sit in a kiln shelf ?

[@BlueDotJewelry]

Thank you! The bowl contains vermiculite, which is my go-to for most kiln firing. Some clays can stick to a kiln shelf and I wanted to avoid that for the copper (haven't tested that factor myself). Shelf paper could be a simple solution for that, too.

[@kemiagbato7402]

Lovely. What surface are you firing on and can you do this with bronze?

[@BlueDotJewelry]

As far as I know, all bronze clays need a kiln. The surface is: bit.ly/SuperwoolFiber

[@LaineyBug2020]

Have you thought about trying the same thing with something like JB Weld? I'm curious if it woud hold it's shape...

[@BlueDotJewelry]

In what way do you mean the same thing?

[@meatlemonade3338]

do you think the difference in price from silver clay makes it worth the potential difficulty and frustration a beginner might face with copper clay?

[@BlueDotJewelry]

I would say that one or two packages of this would be worth your time if you don't yet have experience working at this scale or you don't have a solid ceramics background. If you have one or more of those things under your belt and ultimately want to work in silver clay (and can afford to practice with it) I do think it's worth going straight to silver and getting the hang of it. It's a little different than anything else, and, as I say here, I believe the finished product quality is more reliable.

[@bethannesgarden]

Thanks!

[@kristibbradshaw]

Can you fix the cracking? Oh yeah and, thank you so much for the experiment.

[@BlueDotJewelry]

I haven't tried because: the filler would shrink, and so I'd have to refill and fire at least twice, I think, and I would lose an oxidized layer each time.

[@roderos]

I would imagine you could with a jewelers micro tig welder. But maybe there is something more efficient than that, it could also be used to add a thicker copper wire to replace the thin ones

[@kristibbradshaw]

@@roderos thank you.

[@helenroberts1107]

Would you be able to attach silver clay to copper clay without a kiln?

[@BlueDotJewelry]

@@helenroberts1107 This would be a fascinating experiment with a torch. It’s tricky mainly due to variation in shrinkage rate. (Other options are cold connects, like rivets.)

[@meredithnavin1358]

Would you be able to use this clay as a Skinner blend with the silver? Edit: I do silversmithing and I often use copper. It has a MUCH higher melting point than silver. I need to use an industrial torch to melt it.

[@BlueDotJewelry]

The main issue you run into is that shrinkage rates will vary, so cohesion is a challenge. It would be interesting to experiment but I think you'd be dealing with cracks and splits.

[@jalissaarchuleta6966]

Can you torch fire clay when you are setting jewels in it ?

[@BlueDotJewelry]

Yes! With some exceptions. Generally up to 5mm.

[@2degucitas]

To save money on clay, do you think an item could be sculpted from copper clay them covered with a layer of silver clay? Would they fire together?

[@BlueDotJewelry]

They would fire at different temps, and shrinkage is a factor, making it complicated. I think the best case scenario for mixing the two would be as outer embellishments, or adjacent pieces, not as an enclosing layer. Some metal clay people experiment heavily with this, and it's really a process of trial and error, but very cool results.

[@2degucitas]

@@BlueDotJewelry ok thanks

[@andyparton6680]

can you dry only with torch ?

[@BlueDotJewelry]

@@andyparton6680 Also a kiln! Look at 13:55

[@kristibbradshaw]

Where did you get your makers mark made????

[@BlueDotJewelry]

An out of business maker, but I've heard good things about custom stamps from Metal Clays

[@kristibbradshaw]

@@BlueDotJewelry thank you.

[@deannatroy8113]

Apparently you can mix your own by buying the powder and mixing it with vaseline?

[@BlueDotJewelry]

Yes, some people make their own. The main ingredient is usually a variety of cellulose. I think Vaseline/petroleum would be too flammable, oily, etc!

[@michaelvaughn7137]

What would be great is if you know of any that can be perchesed by the quart instead of these tiny amounts ?!!!!!!

[@BlueDotJewelry]

A quart would be something! I would take 100g at a time, like other base metal brands have offered. I'm also drawn to the idea of larger sculpture

[@allisonjames2923]

Lol. I was wondering how your arm didn’t fall off holding a torch on it for 30 mins - then I heard you say you managed to put it in a positions so you could just watch

[@BlueDotJewelry]

@@allisonjames2923 Yeah! I was prepared to push through, but very relieved to discover that wasn’t necessary

[@that240guysx]

Please please use a full face mask with that insulation. You will get acute silicsis quickly 😊

[@BlueDotJewelry]

That's a newer safe version! Thank you for commenting