CAN I FORGE A KNIFE IN 2 HOURS ?!

[@APs.Custom.knives]

You guys are quickly becoming my favorite knife making channel to watch. Thanks for the informational and fun videos.

[@MartinHuber_Knives]

Thank you so much man! Happy to read that! You can support us by shareing it with your friends 🥰

[@richardturk7162]

Love the knife.

[@MartinHuber_Knives]

Thanks 😁

[@donpreston3796]

That is a awesome knife and I really like the handle

[@MartinHuber_Knives]

Thanks! Nice figured walnut never disappoints!

[@henkvandebeek7921]

Epic! So glad I found your channel. Great piece for two (and a little bit) hours

[@MartinHuber_Knives]

Thank you! Appreciate it :)

[@KitchenKnifeGuy]

Great video man.

[@MartinHuber_Knives]

Appreciate it

[@chadbutler7389]

Super cool knife. I wished I could buy that knife! 😢

[@MartinHuber_Knives]

i actually thought about doing a re-make of it, just...with all the propper heattreatment 😄

[@reiterus847]

Hab mit dir gschwitzt! Afoch geil! Video Qualität wird immer besser und wie immer Unterhaltung vom feinsten 👌🏼

[@MartinHuber_Knives]

Danke 🥰 ich bemüh mich stehts bessere und bessere Videos zu machen, freut mich das mans merkt 😁

[@fern6114]

Große Arbeit Schmatt und wieder jeiles Video salü aus Luxemburg 🇱🇺 ❤🍺

[@MartinHuber_Knives]

Danke dir :)

[@julianschober3569]

Schönes Holz und natürlich Messer! Nettes Video

[@MartinHuber_Knives]

danke!

[@nicholasfrancisco3386]

Make the gutter knife from MW3

[@MartinHuber_Knives]

Sounds like a challenge!

[@Hogbellylife]

Looks amazing

[@MartinHuber_Knives]

appreciate it!!

[@AustriaLpBro]

Really good looking knive! Perfect little kitchen knive

[@MartinHuber_Knives]

Thanks man! Perfect outdoorcooking :D

[@seth1319]

Looking good! What song is that from 1.20? 😊

[@MartinHuber_Knives]

Its from "Of Men and Wolves - I'm not Crying" :) Its a nice tune!

[@michaelmorrison4843]

Great job Martin, hard to believe you made a knife in only 2hrs. & 20 min.! 🤔👍

[@MartinHuber_Knives]

Yeah cant believe it either that i made the knife in 2 hours....... ....and 20minutes... xD :D

[@BalticBlades]

The knife looks really well! But what kind of product did you apply to the handle??? haha

[@MartinHuber_Knives]

Oh this is the best Wax you can buy!! Baltic Blades Burnish - i can sell you some if you need 😘

[@scherlfirearts7142]

Sau geil Martin was da gezaubert hast 👍

[@MartinHuber_Knives]

Danke :D

[@eddybear771]

Brilliant work, next time set your goal for 3.5 hours & race to squeeze a heat treat in there. Good luck & happy I found your channel. New subscriber.

[@MartinHuber_Knives]

Yeah that would be better. nothing beats a propper heat treat. Thank you! Appreciate the support!

[@brysonalden5414]

Hardly a failure, you made a beautiful knife in substantially less time than it takes most of us! I am surprised you didn't pin the handle, but I subscribed anyway!

[@MartinHuber_Knives]

Appreciate it Sir! I thought about doing a pin in the handle but i kinda forgot it under tension :'D Thanks for the Sub!

[@screamheady]

🔥🔨schene griaß 🙌🏻🤗

[@MartinHuber_Knives]

😄 zruck!

[@messer-maxx]

Mit 4 Dosen RedBull hättest Du es geschafft ;-) Mega! Kompliment!

[@MartinHuber_Knives]

Ja...das eine war wohl zu wenig..

[@Messerschmiede.Jettenbach]

Sehr cool gemacht. Das Griffholz sieht sehr cool aus und auch die Wachs-Behandlung. Falls du mit dem Messer nix anzufangen weißt, kannst du es mir gerne zusenden 😉😄

[@MartinHuber_Knives]

Ach da fällt mir schon was ein dazu ;) :D

[@justingoodman5600]

Not a fail. Knife looks great. Challenges are ok once in awhile but usually the knife doesn’t come out as good, kind of a trade off

[@MartinHuber_Knives]

Yeah youre right

[@masonheal5659]

Man I was sweating just watching you try and do it to the deadline 😂😂 another funny vid buddy

[@MartinHuber_Knives]

Man you should have seen me freak out off camera 🤣🤣 Thanks bud, appreciate you watching!

[@johannesruszmann]

Wow, you sure are a well knifesmithing guy, you sure make your Bossmann proud to be his employed!!! How many takes did you need, to get the timer going, right when you wanted to say something? Does it affect the edgeretention of the knive in anyway?

[@MartinHuber_Knives]

Bossmann very happy when worky a loty very fasty! Yes the edgeretention of the knife is always in parallel perspective of timers and videotakes. Videotakes makes the knife softer so you have to make it faster with less takes so it works!

[@johannesruszmann]

Wie of host da an Wecka stön miassn, dassisi währendn sotz ausgeht, dasa leit?@@MartinHuber_Knives

[@4wknives]

Good video and great idea. I saw Walter sorrells do a similar video. I just finished my attempt at the challenge. Much harder than I anticipated. I’m surprised you don’t have more views than you do.

[@MartinHuber_Knives]

Walter and i uploaded at the same day at the same time. When i saw his upload i was like.. "Wait...what?!" 😄🤣 Nice you tryed it aswell, it looks ways easier at first then it is 😅 Well i just started makeing videos seriously a few weeks ago.. But yeah, i wouldnt be complaining if i got more 😄😄

[@4wknives]

@@MartinHuber_Knives your videos are good. Your will gain subscribers quickly. I’ve been doing it for about a year or so. I don’t have the time to make a bunch of videos so my hours watched stay low. I gave you a shout out for the idea on mine. Not that I’m a big channel or anything. Lol

[@MartinHuber_Knives]

thanks man, appreciate it!

[@nicholaskillmeier4895]

GREAT STUFF! I've seen a lot of 1 day builds, and they're all full tang, which anyone can do in a few hours (not counting heat treat). Takes me longer than 2 hours just to shape and fit my guards and spacers haha.

[@MartinHuber_Knives]

i could have done a Fulltang - would have been easier. but i wanted the challenge 😄😄

[@Logan.H.L]

Impressive! 2:20 is pretty crazy!

[@MartinHuber_Knives]

this hammer and anvil combo is just awesome to work with! When u come over one day youre welcome in my Shop anytime :)

[@Logan.H.L]

Yeah man I would Love to check out your shop! Just gotta get over there!

[@geokoxat]

guads video martin moch weida und sickes messa ^^

[@MartinHuber_Knives]

Danke dir!! :)

[@ThomasRadetzki]

Top gemacht Martin. Super Leistung in 2 Stunden.

[@MartinHuber_Knives]

Vielen Dank! 😄

[@seth1319]

Man man man this gave me stress just watching it 😅😅

[@MartinHuber_Knives]

Dude...cant imagine how it felt for me. 🤣🤣🤣

[@seth1319]

@MartinHuber_Knives but I'm seriously impressed how far you got. Most challenges I've seen exclude the heat treatment as it takes too much time. 2 hours for everything is insane. Or... hear me out, you can now make 4 knives a day during office hours and sell them at Chinese mass production prices 🤣

[@MartinHuber_Knives]

@@seth1319 NEXT VIDEO: I MAKE 4 KNIVES FROM CHINESE SWEATSHOP QUALITY IN ONLY 4 HOURS. 🤣

[@fern6114]

@@MartinHuber_Knivessicher😅❤

[@899Macho]

You are amazing such a beautiful knife made a short amount of time

[@trhyer]

Now, for science, can you do some data collection on how many Red Bulls until you can do hand sanding on a 240mm in under an hour?

[@MartinHuber_Knives]

Well there have to be different factors? Damascus? Easy. Stainless Clad Apex Ultra Core? Damn.

[@MartinHuber_Knives]

@flimflam3299 oh hello no xD sounds like a nightmare...

[@Northknives]

Respect, that was awesome. I actually hate these 2 or 5 hour build videos as i think in someway it devalues the craft and countless hours knifemakers put in.... i wish more would just admit that knocking out a knife in a couple of hours just isn't what goes on/even possible. But this is the first one I've seen that acknowledged that a modern oven temper wasn't possible. Fun for a challenge and getting views i guess. How long to forge weld the steel before you started? Anyway, you've earnt a sub from me. Really cool looking knife.

[@MartinHuber_Knives]

Thank you so much for your comment. I totaly agree with you. Sure i could have said "I made it, who will know that it wasnt only 2 hours" But reality is, that with propper HT and work you cant. It was a fun spontanious challenge, that i am happy i did and showed me how much i could really do. Forgewelding up this billet includeing material prep took me about 45-60minutes Thanks for the sub, appreciate it!

[@kamon_knives]

Du bist verrückt. Ich mag das 👌😂. Aber das du echt flott sein kannst wenn du willst weiß ich eh 😜.

[@MartinHuber_Knives]

Verrückt? ICH?!.....stimmt.. Nur für dich

[@sperber-knives]

Geiles Ding 🔥

[@MartinHuber_Knives]

danke bebe 😄

[@wyzo]

🤘🤘🤘 Legeeeend!!! And btw, doing your best is good enough 🦾🦾….but yours is amazing. And i got a project idea for you….can you use the steel from an old puch bike ( free choice…bicycle or motorcycle) and make a knife out of it? Or am i pushing the limits here?

[@MartinHuber_Knives]

thanks a lot! :D Sure would be able, but getting one of those will be not as easy i think

[@wyzo]

Got an idea. I’ll drop you a DM 🤘

[@RobertlSmith73]

Yet again Martin, great video unlucky on not completing the challenge. Found all the cock and ball all over the shop. Do you have a Facebook page??

[@MartinHuber_Knives]

yes sir, its linked on my channel!

[@Edgunsuk]

Nice but no mechanical fixing n the handle just glue ? subscribed (( until the first time i hear you call pattern welded steel DAMASCUS !!!!!!!! ))) (( ps taught knife making for two years after qualifying in Hereford))

[@MartinHuber_Knives]

The Epoxy we use is strong enough to keep everything in place where it should be :) On kitchenknives we dont do anything more, on hunting knives or similar i normaly like to either do a through tang with a screw or a pined handle...but...in 2 hours i just couldnt do that :'D Sorry to dissapoint you in the Damascus theme, this will be very soon - but to calm you down i know its pattern welded steel, but the Name "Damascus Steel" just has become the classic word for this kind steelwork :D Pretty nice job man! I am a trained Blacksmith since over 12 years now, started knifemaking pretty much the same time and doing this fulltime now since 7 years :)

[@Yanson99]

Mega Messer draus geworden aus dem Reststück 👌🏻 ich finde so „Reste verwerten“ Videos extrem spannend was man noch draus machen kann. Einfach auch mal jedes kleine verschiedene Stückchen Stahl das übrig geblieben ist zusammen klöppeln und aus Großvaters Holzbein die Griffe mafhen würde ich hart feiern🤣

[@MartinHuber_Knives]

hmmm viele stückchen stahl zusammenklopfen und n messer draus machen? Klingt..nach..ner idee ;)

[@Yanson99]

@@MartinHuber_Knives hehe 😏 du weißt ja Ideen hab ich immer

[@marvinlongino3300]

Super geiles Messer Martin für die kurze Zeit...hättest du nur mal einen Red Bull mehr getrunken dann wärst du auch nach 2h fertig gewesen 😂. Kuss auf die Nuss und mach Weiter so

[@MartinHuber_Knives]

Bessere Zeiteinteilung und 5 redbull mehr

[@williamavery9185]

Have you ever thought of making your own iron ore to make something special ? If it was done 1000 years ago surely you can do it ?

[@MartinHuber_Knives]

Actually i have been part of a smelting project a few years ago. But i would love to do it again! :D