The flywheel was cracked before you even took it off.
@windsnowandstatic9075Ай бұрын
I don’t even know how I ended getting this channel suggested but I’m pleased I did.
@kencramer16978 ай бұрын
It would have been funny if you took it back and put it where you found it and put a FREE Again sign on it.
@brendanlloyd32668 ай бұрын
made me smile, made me laugh, made me cry.
@trevorqualls94708 ай бұрын
Those things are notorious for needing the valves adjusted often. It can make them hard to crank over like that and put more stress of the flywheel. Along with other issues. I picked up a free one with broken gears on the flywheel due to the valve adjustment making it hard to crank.
@thedoubtfultechnician80678 ай бұрын
The valves were fine… I think it’s the camshaft. Not worth fixing
@BrilliantDesignOnlineАй бұрын
I have a Scotts which is a cheaper version of JD. Mine has a 25HP motor and a 46" deck, but besides being orange, I recognized the front axle casting and many other things. My solenoid isXX was at the back. I bypassed all their BS, and put a direct wire from my OWN quality switch, put a PROPER solenoid right next to the starter, and put a winch connector on my airplane battery so it is like 10 inches from battery to solenoid, and no more problems. I also can remove the battery when not in use by just unsnapping the lead, and put the battery in the shop; I also did this with my vehicles, a couple of FAT battery cables to a winch connector, so if I need to jump, it is snap battery on, start, remove, no cables needed.
@Mountain-Man-300011 күн бұрын
I see you have the same sickness that I do. LoL I know that free thing is good and buggered but I just gotta try my luck!
@JohnSmith-lw2bm8 ай бұрын
The older 110’s were very good. Right about until 2000 or so.
@kyleallred9849 күн бұрын
If friends don't help. That's what kids are for.
@ehdrien50318 ай бұрын
Yay, new banger just dropped
@MrLTeaches8 ай бұрын
Ayo you know I would've been there in 15 mins to load that shit up. Another fascinating watch though, reminds me of the time we had to fix the flywheel on the old Craftsman push mower :') Good times
@davedemo82298 ай бұрын
yeah the bin is back!! whoo whoo!!
@nunyabusiness4651Ай бұрын
I did a little leg work online, found dozens of the fans and covers, no fly wheels. obviously this was a design flaw!
@whackstro518418 күн бұрын
I wonder if torquing the flywheel to spec would have worked lol
@crassbusinessman31227 күн бұрын
You sound like a buddy of mine. Were you stationed in Miramar at some point?
@doublepenn5732Ай бұрын
I got one of those about four years ago, free.99... I ripped off the deck and used it to pull my deck off the side of my house... It still runs, I did nothing. I use it to drink and drive(reminiscing). My kids use it to bring beer to me when I'm over the neighbors; he never has enough.
@herzogsbuick2 сағат бұрын
loooooool
@cavalierliberty683812 күн бұрын
"oh, crapbaskets" Oh, you say that too?
@1993MAZDAMIATA2 күн бұрын
Is the D130 any better? My grandfather has one never maintains it and it runs great
@Stealth866516 сағат бұрын
Lol I still say flawless victory on the regular
@Finntheweekendwarrior14 күн бұрын
Love it
@ed0cАй бұрын
turn it into a race mower IMO!
@UnizukaАй бұрын
good thing that shard flew to the front
@bobscat-wj4ubАй бұрын
should bring it back to the guy and put it back with a sing from a box on it that says fixed
@TDR1990Ай бұрын
Funniest ending so far :))))
@kvernesdotten25 күн бұрын
Oh Deere, a new flywheel is over 500 bucks before shipping and tax. Was wondering why it went back out to the curb
@MowersNBlowersКүн бұрын
Flywheel is $50 used on eBay
@alphamegaman8847Ай бұрын
At 7:20 Ah Ah Ah Ah!! 👍
@MaximuMechanical8 ай бұрын
Why is this the worst John Deere I'm very curious
@thedoubtfultechnician80678 ай бұрын
Poor engine design and under built cheap transmissions.
@MaximuMechanical8 ай бұрын
@@thedoubtfultechnician8067 hopefully the same can't be said for the 130
@thedoubtfultechnician80678 ай бұрын
@suburbanstoner420 The V-Twin engines might be better but it has the same transmission. They are weak but not hard to replace.
@TishaHayesАй бұрын
It is the worst, until the next model comes out. They are in the pursuit to the bottom. They want people to fork over for "The John Deere" experience, prestige and what used to be top-notch reliability. Now it just means that you overpaid by twice of what the machine is worth. And I am a John Deere owner (zero turn radius riding mower).
@herzogsbuick2 сағат бұрын
your vegetarian wife wears leather boots?!
@FlyingShotsman23 күн бұрын
That D110 is bad but I'm not sure it's the worst. Find yourself an SST15, SST16 or SST18. The SST in the name stood for Spin Steer Technology, which was marketing BS for a hydrostatic transmission and free-castering front wheels. Basically a zero turn radius mower with a steering wheel instead of levers. Lots of slop in the steering makes it nearly impossible to drive in a straight line. OK for yards with lots of curved edges, but utterly infuriating for large rectangular yards. If you get on or off the go pedals too fast it will snap your neck, and rotating on a rear wheel -- its whole purpose, remember -- will tear up your lawn. They were only sold for a few years, at eye-watering prices. Luckily I got mine lightly used for a song. So far it has only needed a few cheap parts but when the transmission dies, it's scrap.
@davedemo82298 ай бұрын
classic valve adjust. done a bunch. had a guy break a flywheel because of it. 5 cent part protected a 250 dollar flywheel. another good one. holy crap commented before actually watching the entire video...my bad. the 100 series is for depot. x300 and up is from the dealer. my x300 has a Kawasaki twin. no issues . Bought a BUG-A-SAULT gun for the stink bugs. dont give them a ride in the dyson...Ask me why.
@thedoubtfultechnician80678 ай бұрын
Valves are perfect, unfortunately. Probably a broken camshaft.
@davedemo82298 ай бұрын
@@thedoubtfultechnician8067 on rare occasions the cam gear will slip on the shaft. Its pressed on if I remember correctly. Get it back quick at least tear it apart and put it out of its misery.
@thedoubtfultechnician80678 ай бұрын
Nah look into the Briggs compression release failure- it’s a piss poor camshaft design and a common failure. It’s what did this one in. A beefier starter motor might do the trick.
@TishaHayesАй бұрын
Yes, I have had the Dyson experience with the stink bugs. The bouncing around just makes them exude that horrible yellow goo and the little HEPA filter does not stop the odor from being blown all over the room. Also, after the whirly ride they just climb back out through the tube. I hate the damned things.
@TecumsehRulesbcserk8 ай бұрын
It probably had a plastic transmission in it as well, so chances are it wouldn’t have lived much longer anyway. It absolutely disgusts me how these junk piles can cost upwards of $3000 dollars to only to have it break in less than two years. My advice? Buy a good used one that is an older model, these things were built like actual tractors back in the day compared to these cheap stamped aluminum and flimsy plastic garbage heaps on wheels.
@thedoubtfultechnician80678 ай бұрын
Check out my f525 video!
@thedoubtfultechnician80678 ай бұрын
All it needs is an engine swap and a transmission swap and a deck upgrade and it would be a solid mower.
@sc133811 күн бұрын
@@thedoubtfultechnician8067so everything 😂
@ShainAndrews8 ай бұрын
All of those machines are trash. Even new... they are trash. 7:24 Key's are a designed fuse... a weak link. If that tapered shaft is properly mated with the flywheel it will never spin before the crank cracks. Correctly lap them and you can run without a key no problem.
@bobscat-wj4ubАй бұрын
don't say "more different" that's not how people talk