Can it Take a K26? - Episode 18

[@beretnarf]

All hail the glorious sledgefire, well done. Definitely a good idea now to reinforce with putty in the slots of the lever arm.

[@CaptainXavier]

I plan to...then I plan to apprentice under the master of the sledgefire until I learn some of his tricks.

[@landonleverett3224]

Captain Xavier love you're vids keep up the good work and can you make a can it take a K26 video about the rival blasters

[@bigchungusofficial5393]

Hey beret, how you doing ?

[@floppyori3262]

Sludge fire

[@BratcherLev]

12:58 "Bratch will be so proud of me." I am. I truly am.

[@glitche7220]

Aaron Bratcher ya

[@scarlettbandit2803]

I love the Sledgefire. Perfect for when you need to dispense justice, one shell at a time.

[@ryansadventures8708]

Scarlett Bandit of you need to dispense justice I would use the, the judge

[@freedomlover7768]

Hey man, a mossberg mag-fed shockwave is a pretty cool gun

[@TheNothingYT]

trilogy: hold my shells

[@danemorgan1794]

Imagine a roughcut with all 8 barrels brassed with k26 and metal internals

[@MaddRoxYu]

Smoothslice

[@LambdaMiscellaneous]

@@MaddRoxYu nice

[@lissaxitray8110]

@@MaddRoxYu nice

[@PurplSkater]

That'd be one hell of a shotgun for nerf

[@akziongarcia4112]

@@MaddRoxYunice

[@funnydude447]

Can that pack of Skittles take a k26?

[@infectedruby]

Rattlebones Tv I don't think so it is reverse plunger

[@JoeKen]

yes it can in fact i have personally tried it myself and it is now my primary at all wars because it indeed hits like a truck. jk

[@w6rv]

Rattlebones Tv lol

[@yaboidustin2447]

Leigh Peterson OF COURSE NOT 😂😂😂 THATS SO FUNNY

[@yaboidustin2447]

Rattlebones Tv yes

[@mattb6740]

you should do a, can it take a car battery, for flywheel blasters. Thumbs up if you agree.

[@deanodean4972]

he would need to put new motors and flywheels because the stock motors wont ever hand it, how ever they khaos and nemesis might be able to

[@pokeracerfanffanandpokemon9634]

deano dean yeah and the mastodon

[@ThomasFarquhar2]

Lol will shoot at tanks and snap them

[@CaptainXavier]

I know it sounds impressive...but car batteries are only 12.6v. 3s LiPos are 11.4v so it is not even that much more. I mean, EIR currently runs on nearly 16v.

[@CaptainXavier]

@@narenthebeesechurgerman422 yes, but that in no way effects what motors you can run on them, just how long they will run.

[@MGlBlaze]

I like the rear prime idea for the roughcut. I was going to do something similar myself by sticking the front of a roughcut on a strongarm handle and back end, but I just kinda got bored of the project half-way through and never really bothered to go back to it.

[@JunkboxSP]

Yay, my little Sledgey can be upgraded! Now, I must wait patiently for the day you actually finish out the shotguns, and apply k 26 to an Atlas... Although to be fair, the Atlas has similar gearing systems to the Rough Cut, and it's already got a monster of a spring inside of it, so who knows, maybe k26'ing it is actually a downgrade. We'll see.

[@northumbriabushcraft1208]

The rod is too thick... I've heard that before during my teenage years...

[@CaptainXavier]

Somehow I doubt that... ;P

[@pringles3254]

@@CaptainXavier ooooo ouch

[@raquelkhu7722]

"Anything with x in the name is cool." Harmless self-promotion, I get it.

[@meroastisruined3039]

Uploaded 18 seconds ago? Dang it I'm late, also quick question do I need orange Fanta and skittles, also what flavour skittles do I need?

[@dartanyonharris9705]

lol

[@CaptainXavier]

Yes, the skittles and Fanta are required. However, you are free to choose your preferred flavor of skittles. A man's skittle flavor is his own private kingdom.

[@meroastisruined3039]

Captain Xavier asking a man to eat a flavour of skittles he doesn't like is like telling him to jump off a cliff

[@yaboidustin2447]

Nathan Beck okay that makes sense

[@froopty1854]

Captain Xavier sour skittles >:)

[@NORAMA01]

CAN IT TAKE A SLEDGEFIRE SPRING?

[@ibrahimshokry4084]

really looking forward to the rear prime rough cut conversion build guide. good work.

[@1nsane860]

is it strange that I am jealous of your spring collection?

[@benjamin8558]

Insane0 Juggalo no

[@just-there]

Who isn’t jealous of his collection

[@karisasani7006]

So effectively the sledgefire spring is like k25

[@badimaaa4a548]

wow. did'nt expect roughcut would be so empty.

[@sirspookay8676]

Almost as empty as me Wow such edgy

[@franklinjentertainment8150]

The way said you learn something new everyday. True

[@koningbolo4700]

Carl Orff, Peter and the Wolf... I am impressed mon Capitan...

[@CowMando]

You said the stock spring of the Sledgefire is basically K26 with a smaller diameter. My question is, since blasters like the Retaliator and Recon MKII can't take the K26 because the diameter is too big (hangs on the plunger catch), is the stock Sledgefire spring narrow enough to fit? And how does the C-836 compare with the stock Sledgefire and K26? Would it fit in a Retaliator/Recon MKII?

[@lochlannwatling3482]

Good point

[@hielke-gaming7997]

Good point

[@xtout]

Good point

[@synthvt]

Good point

[@yaboi6006]

Good point

[@hanktheguy3237]

10:09 me every time i dismantle a gun

[@dr.jex___]

lol

[@eomersimbajon2938]

That's a monster cat logo, isn't it?

[@acethepanther2153]

I take that gun apart evry day when i bored

[@BryanWasHere89]

I would love to get my hands on all of those someday. Now, the only other shotgun I can think of, that I'm K26 curious about is the Double Dealer. Heard it's kinda bad. Wonder if a K26 could help it not be.

[@joshuellejulian8058]

great great great!!...your vids are always great!!!

[@toro_rosso]

The reason the sledgefire has such a powerful spring already is because it has to fire 3 projectiles which requires more power

[@rezaleon7453]

you can modify your sledgfire to be more powerful buy nipping off the dart posts of the shells and taking out those spike things in the plunger tube. you can disassemble it and take those out making it stringer

[@Merkkc]

on episode 26 of can it take a k26, do a special blaster or something

[@stainlesssteelruler143]

yea, i think he should do a flywheel.

[@fizz4023]

A few years to late buddy

[@xtout]

Stainless Steel Ruler what

[@badimaaa4a548]

@@stainlesssteelruler143 but... Definitionaly, flywheelers can't even use a K26. They use the spinning of the flywheels to pull/push (no giggity jokes plz lol) the dart out of the magazine.

[@stainlesssteelruler143]

@@badimaaa4a548 it was a joke. To everyone in this thread in fact, it was a joke for god sake.

[@jacobyoder2181]

K26 too small? Absolutely unheard of

[@johnnyjolly2985]

This is my favorite series it is awesome captain x keep up the good work

[@turtlemanturtle5664]

I am still waiting for him to scream CAN IT TAKE A K26

[@timothydavies2783]

yay shotguns

[@dmdizzy]

That ring-prime Roughcut took me way off-guard.

[@dylanwight5764]

If you're interested in another Lanard blaster, give the Speedloader a shot. Or rather, the Banshee Beat 2013 re-skin. It has updated internals. I can tell you right away that yes, it can indeed take K26, and it needs it with that traditional terrible barrel length

[@komitadjie]

Have you ever considered modifying Sledgefire shells to fire other projectiles? Like, a mega dart, or Rival rounds? It seems like there might be enough room there for a single? That air cylinder is *humongous* and carries a darn big spring...

[@CaptainXavier]

Yes, I have a number of specialized shells for it.

[@alrhakz8270]

cap ,are you making a video for eir's data,such as crono data and range? or you broke eir?(i hope not) pls reply

[@CaptainXavier]

Eventually...

[@alexfelice4676]

please do the deploy, we all know that it sucked, but with a k26 spring it would be much better, like if you agree!

[@CaptainXavier]

+Happy Burger I already did the Deploy...

[@busterc701]

For the back prime Roughcut would it be possible to make a cross bow type prime for it, so it would be easier to prime with heavier springs

[@CaptainXavier]

Yes

[@justinfowler4539]

thank you for doing the rough cut

[@CaptainXavier]

You are welcome

[@spyv6603]

In the hall of the mountain king music😂👍👌

[@CAIDENROX]

My only ever rough cut (Australian) I left stock and the gear train broke. Never bought another. My first ever blaster was an Air Zone Triple Shot. It was green and orange.

[@grugg3108]

Cool, he made an elite (for real)barrel break

[@offlinemedia1784]

Just broke my Roughcut yesterday. Put that thing through hell. I’m kinda impressed I was able to brake it.

[@connorshoemaker2466]

On the rough cut 2x4 you can pull the trigger slightly and fire one bullet then pull the trigger all the way and shoot again without priming again

[@erty2389]

What about the dubble dealer?

[@froopty1854]

ErtyHD it cant, I tried and the shell is weak and it exploded, but you also might have issues with the gears shearing.

[@creaturedanaaaaa]

riperoni

[@ThomasFarquhar2]

*insert aftermath of coop772s smashing his*

[@eomersimbajon2938]

The rough cut is sooo perfect for a reaper cosplay....

[@harrisontashjian752]

Barrel break can be pump action, remove all the break barrel stuff and saw off the front parts and add a grip. And now you have a nerf sawed off shotgun. Or a poor mans rough cut

[@robarmour5368]

MakeTestBattle singled a Sledgefire and got over 200fps shots out of it, and it still can reload with the break action

[@badimaaa4a548]

Why, Just why, Am I SO DRAWN TO SHOTGUNS

[@nerdtvch5]

I didn't know they made the rough cut in white, white is a cool color, I might need to get one of these now

[@Kikabopom]

Can the SlingFire, Ionfire, Doominator, or any of the Vortex blasters, take a K26?

[@seal3626]

Kenpachi Ramasama No, yes, kinda, Definitely no

[@alexelliot2443]

For that upgraded ruff cut maybe add a long strike grip and stock

[@patrickrandall883]

I still think you should upgrade your wrist raider in the form of a full auto Stryfe wired to a remote trigger put on your glove. OR You should make a molle rig that has a Titan tank and an upgraded electric pump, also attached to your glove. It could have a tube running to an absolver mounted on your spare shoulder.

[@dr.jex___]

Because there are so many barrels which means a lot of brass, people use to re-barrel the Tripleshot with Crayola makers.Also, I am currently building a video about a shotgun pistol.

[@williammaple8857]

The sledge fire probably has that strong of a spring so it can fire all 3 at decent range. I bet if the spring was like the rough cuts spring the darts would go like 25 ft.

[@vegasspaceprogram6623]

You actually made that into an elite barrel break....

[@michaeldreon3395]

You should do a rival episode

[@CaptainXavier]

I will

[@AzuriteCoast]

Hey Chaylo, I was wondering, what if the mechanism (or vital parts) of the Roughcut was made from metal? Would that give the mechanism enough strength to handle a K26?

[@CaptainXavier]

Probably.

[@toucannfroot9107]

You should buy some springs specially for reverse-plunger blasters.

[@aes2630]

Regarding the Rough Cut what if you kept the pump grip and had an external connection to your rear priming bar. This would make the blaster easier to prime, allowing you to put more power.

[@Glenn-kc5eu]

No wonder the sledgefire is a beast stock especially if you get the 3rd party single shot shells or brass shells Ive gotten my sledgefire shooting crazy hard by just changing the shells and using stefans

[@themadquacker1462]

I made a seldgefire build for my friend with one of those springs. It works super well.

[@aayush7645]

someone singled a sledgefire.And it hit really hard.

[@lumengod]

Wow you weren't kidding about shotguns already on the list hehehe. Great video. Another suggestion would be Bows or crossbows

[@CaptainXavier]

They are also on the list...although many do not have springs...so we'll see if I can find enough that do...

[@lumengod]

Captain Xavier yeah I'm just thinking of the mag fed or spring types, good luck and keep up the amazing content

[@rzrider683]

For the triple shot, with that huge of the plunger tube, you might as well make it modular. If not that, I have an idea. For one cylinder it could be mega, for another elite, for another shotgun, and one boomco shotgun/singled

[@shadowsa2b]

i didnt know the Rough Cut had a Zombie Strike release. i had to look that one up. at first i thought you were referring to the Brainsaw, which is similar, but not exactly the same. (duh)

[@kungflumaster5495]

The judge looks like half a mastodon shell wise so it might be able to take a mega mastodon drum

[@yohanzo]

Thanks for this! My sledgefire will be receiving a longer k26! Muhaha...

[@busterc701]

For the rough cut, just make metal gears

[@ryanborchert8389]

don't mind me Captain, I'm just here to listen to the background music you used for this video. I love Edvard Grieg, in the hall of the Mountain King is a classic!

[@drachenklaue07]

Roughcut with a direct pump Prime without the gears could work, with a shorter prime stroke. Maybe you could retain all the functionality still?

[@pcornelissen]

make the triple shot use absolver because the biggest problem is the seal between the barrel and the gun. i used the spring of the triple shot in the single shot brother of the triple shot (the lanard sawed off hand cannon) witch standard has a better seal but a crappie spring witch becomes a beast with the triple shot spring

[@ryanray4399]

Why is this so entertaining I don’t even mod blasters

[@CaptainXavier]

+Ryan Ray must be the melodious sound ofy voice. ;)

[@ryanray4399]

True True

[@Blight_750]

I recently modified a brainsaw and it surprisingly can take a big spring load Don't know if the end of the plunging rod will be too small for the K26 to push the rod forward But it looks reasonable Try it out if you would like

[@CaptainXavier]

I will...if I ever get one.

[@Blight_750]

Captain Xavier Sounds great 👍🏻

[@reuben1058]

removing the ars on the sledgefire takes away the ability to fire incomplete shells

[@buucey4719]

you can get 7k orange mod works springs in the roughcut without it braking. (the lie is shorter but still reasonable).

[@KDWolf27]

The barrel break reminds me of a sawed off double barrel shotgun.

[@CaptainXavier]

Pretty much

[@LightningEagle14]

holy crap! your at 23k subs already! congrats man. your growing fast.

[@jeromeg9397]

I want every last drop of power into the barrel break aka "pirate gun"

[@disorganizedbones8139]

So for the Rough Cut to fit a K-26 and still keep pump is metal gears? Hmmm lucky I'm in manufacturing because they Rough Cut is my favorite blaster

[@captainlouie6829]

Cap, I would love it if you made a barrel break that could take sledgefire shells(you've done crazier) or a double barrel sledgefire

[@kyloluma1212]

For the barrel break, isn’t this ‘can it take two k26?’

[@ElNeroDiablo]

One shotgun I'd be interested in seeing if it takes K26 - Buzz Bee Double Shot! (yes, the shell-using sucker)

[@CaptainXavier]

It is on the list...somewhere

[@PewTheToaster]

The Doom slayer would be proud

[@BreakYourMark]

Hay just thought i was let you know the progress of the package i sent you, it left Maryland the day after it was supposed to arrive in Washington, and is currently still in transit to Washington, it will be there… eventually I guess

[@madtoucan]

Favourite part is that you have skittles

[@Kids_Scissors]

I want that full suit of armor in the intro.

[@ogcrestfallen]

I love this series 😆

[@rvinfalls5200]

What spring did you add to the barrel break?

[@lizard5109]

"Make a quad-shot sir"

[@senorali]

I know it's a super janky way of doing things, but how feasible would it be to externally connect the pump grip to a pullback prime? That would give you the comfort of the pump with the durability of the pullback, albeit with some added bulk to the shell.

[@PureCountryof91]

Hmm. Almost considering an ar15 buffer springs. 😂🤣

[@JamieTenikoff]

Nice one CX!

[@gomibakosan]

Do the centurion, a gun with that much k26 is bound to be good, and the centurion could actually be not only a viable primary but a legitimate sniper!

[@slimebuck]

hope you had a good birthday man! Will we see a few integration videos from that goodwill hunt?? Frankenstein a few together!

[@colecrouch4613]

you can stil put a front pump on it just use a out side metle rod

[@birkvanrillaer4787]

dear captain X please try to make a rughcut intigrated with the priming of a hammershot. one hand priming shotgun would be awesome. have a nice day

[@netherchu1294]

Birk Vanrillaer if you make it lever action it can be one handed

[@a4cva4]

Birk Vanrillaer Isn't there a doom-lands hammer action blaster with a 4 smart AR? just try tinkering with that.

[@bobertjohnson2264]

Birk Vanrillaer that would be damn near impossible and even if it is possible you'd lose the two-stage trigger and the hammer pull would be probably very heavy.

[@cornyjim6852]

i had a tripple shot where the turning mechanism didn't work properly. so i made it a single shot blaster...and now this thing shoots extremely far. :D

[@mr.loafsalaskancousin7000]

most buzzbee barrel break blasters already have k 26 so nerf took a page out of buzzbee's book.

[@slimebuck]

some blasters I can't remember if you have checked out Vulcan, Stampede, Centurion

[@joshuellejulian8058]

...hey yahhh

[@isaacwithrow9024]

Do you still have this barrel brake ? Would you be able to part with it? How much more FPS do you think it would get with brass breach ?

[@adrian_zombturtle148]

Take a drink every time he saids k26