Can it Take a K26? - Episode 56

[@knate44]

Suggestion, lawbringer stock onto a roughcut.

[@CaptainXavier]

+knate44 ...I dig it!

[@hunterwonson2251]

Yesssss. That would be just about the perfect length and it hold 12 rounds

[@brianmurphy7092]

Hmmm I'd take a sling fire stock cut it and attach it to the lawbringer stock so you'd have a tad more comfort along with looks what you add this idea to is up to you I have put a sling fire stock on the rough cut it's great and good lookin

[@thr335ix7]

Done it and I love it

[@infernolukegaming3212]

I love it

[@Draftsman_MC1300]

I love your expression as you look up and smack the camera with the spring. 🤣🤣🤣

[@ProfessorPhysics2]

Hey Xavier, if you have a broken Apollo, you can use the 3rd gear (preferably the new metal one) as a lovely replacement for the weak plastic one in the Judge :) I wasn't sure if the Judge could take a K26 but thanks a ton for confirming it for me!

[@RosyRecluse]

Someone need to try this... give the judge a real upgrade without adding a compressor system inside.

[@Isheian]

LoonShy Honestly, a xbz or Titan with a compressor or hpa is worlds better than a spring upgrade

[@tomaso202]

Do you know if I can get a K26 in my stryfe

[@gabrielkillian5111]

Tomaso your joking, right?

[@dogdog357]

@@gabrielkillian5111 Nah, he's completely serious. He's going to give it the heaviest trigger pull ever, or a hefty mag retention

[@jacobesperanza6452]

The little foam seal that connects the cylinder and the plunger tube on my lawbringer got destroyed, so i cut up a dart flattened it with a hair dryer and superglued it on, somehow it worked (i found this funny for some reason)

[@jonathangates8906]

Just as a FYI, the widened part of the spring in hammer primed blasters is what goes towards the bottom, as its what stops the spring from pushing out the bottom.

[@meroastisruined3039]

*sees judge in thumbnail* well, good luck trying to open that

[@CaptainXavier]

It was actually fairly easy...if time consuming...

[@meroastisruined3039]

Captain Xavier was expecting it to be assembled, but luckily not

[@CaptainXavier]

A fact you would have known...if you had watched the video before commenting...which is KZbin etiquette 101... :P

[@meroastisruined3039]

Captain Xavier I suppose so, but in my comment I said "sees judge in thumbnail" so I was judging it by the thumbnail (pun intended lol).

[@jrdi3574]

New year, new intro! Absolutely fantastic!

[@thefyingfist]

Love the new intro!

[@CaptainXavier]

:D

[@Nate-sq7mw]

same i love it and i strangly laughed at it a bit dont know why

[@aiden713]

Hah best intro ever....LOVELY!!

[@CaptainXavier]

:D

[@BishopGantry]

It didnt spring to mind youd change the intro, just lovely Yes pre and post mod range and velocity tests!!!

[@CalebDoesStuff]

Love the new intro! This episode was very helpful because I just got the Judge. I’ve been thinking if it could take a K-26 for a while now! Great video cap!

[@tristenmontey3627]

He should put a k26 on a maverick

[@CaptainXavier]

I tried...like...50 episodes ago. It cannot take one.

[@zeroblade6599]

New intro, sarcastic comments, big blasters. my year's off to an awesome start

[@CelticViking57]

Awesome intro cap. Your face when u look up to the camera was hilarious

[@Lumini-3]

Fun fact: you can double the Hammershot's spring using an "Elite" Jolt spring. It makes the blaster shoot faster, although I don't know by how much

[@snakefoolery2177]

The LawBringer looks like the grenade launcher for the Demo in TF2

[@rueseki6121]

demo but he's a cowboy

[@thr335ix7]

WhyAmISoBored *ka boom*

[@scottsweeny6647]

Na it looks like the lawbringer

[@Dreadballoon]

WhyAmISoBored yeah!

[@buddysgarden]

yes

[@Mildcat743]

Big fan of the new intro, as well as the science part of the Lawbringer verdict, it adds a nice level of fairness when you know the outcome.

[@hugoyoung4890]

Nice to see the fruits of your labour with a new spring bin.

[@CalebDoesStuff]

I love the chronograph facts!

[@Old_Snake13]

Nice Vid Cap. On the topic of cosplay and the judge... I plan on painting one up for Mrs Commander so she can use it for a Bombshell Harley Quinn costume.

[@CaptainXavier]

NICE!

[@boba-fett831]

Love the intro!

[@snorribjorn5074]

Like so many others, I like the new introduction. Excellent work as always!

[@CaptainXavier]

:D

[@sir_goofs9456]

Favorite part is the new intro excellent job

[@valerielastname9508]

I believe that spring for the Lawbringer was a Strikefire spring, or at the least the same dimensions as one. I have a Strikefire spring myself, and it seems to be identical.

[@iceybobster]

Love the intro, watching it over and over again

[@PerfectRequiem]

I wonder if there's a type of sturdy label you can apply to springs and mystery parts so that the source is marked when you go to use them again later?

[@CaptainXavier]

+PerfectRequiem I have started doing this actually. But too late to help here.

[@ryanwarrener6760]

THE NEW INTRO IS JUST SPECATACLER

[@owenkennedy3215]

I was not expecting that intro oh my god. I love it.

[@ObbyCloud]

New intro is great! The look on your face is just perfect.

[@Lumini-3]

Jolt Springs can fit outside the hammershot's spring and it makes the draw weight noticeably heavier

[@canny24635]

The Longshot front gun spring works really well with my hammer shot

[@scottjs5207]

I have one of those..... thanks!

[@thomjames66]

I'm breaking the rules but I'll risk it, liked the new opening and the new what can it take, I have the recall of a goldfish now on with the merriment!!! props to spell check for dropping the y and adding the i!

[@CaptainXavier]

What rule are you breaking? The don't comment until finishing the video? Compliments are generally ok since they are not things that are likely to be effected by later content. Generally it is questions or corrections or suggestions that are the issue. :)

[@beriorgar]

cool new intro! i also liked how you went a little more in depth with the lawbringer. so yeah, i like this improved format

[@SofaPop.]

Could you make a blaster that fires K26? And can that blaster take a K26?

[@DeisFortuna]

The judge is the perfect meme gun. Also, if it's possible to mod it to take sledgefire shells instead of having to manually reload all 30 shots, that would probably make it far more practical. (Assuming you also made some kind of button or mechanism to quickly eject empy shells, like ejecting them when the shell rotates past the firing position)

[@Paperguide152]

THE NEW INTRO IS HILARIOUS

[@notforsaletoday1895]

Ooohhhh Cap, I love the new intro 😂

[@ZachsYTUBE]

Nearly died laughing at that new intro 😂

[@CaptainXavier]

:D

[@Isheian]

Seconded

[@TytonidaeIndustries]

i would love to sea just a compilation of all your various intros

[@MrTKHolmes]

New intro is perfect!

[@jamessaylor3089]

I was actually just tearing apart some goodwill finds for parts today, and among them was a Tek 6. Dig up one of the many stock Hammershot springs I have laying around, and as it turns out the Tek 6 spring rests snugly around the Hammershot spring, the internal diameter being exactly the same size as the external diameter of the widest coil of a Hammershot spring. I am not currently able to test it to be 100% positive, but I’d put down the $1.50 I paid for the Tek 6 that it would work.

[@CaptainXavier]

Nice! The rumors are confirmed! Thank you!

[@jamessaylor3089]

Captain Xavier, I just compared the spring combo to some Hammershot internals. It looks like it would work. However, personally I’d add a larger washer of some sort as the Tek 6 spring is almost over the edge of the support and could, in time, slip over and fail. It would definitely be a heck of a spring upgrade though.

[@BoldBeardedMiddle-agedGuy]

Awesome intro!!!

[@randomness1175]

I minimized my law bringer and I will tell you it is definitely oversized but with a spring upgrade it's worth the bulk

[@CaptainXavier]

Nice!

[@darrenjacobson7456]

So... you added a stock to a hammershot, and now you're removing the stock from a Lawbringer? What the heck is going on in your head?

[@CaptainXavier]

+Darren Jacobson madness! That us what! I will, of course, make the stock from this into a standard stock. Then I will put a stock attachment point on my minimized Lawbringer. And then I will be able to put the stock BACK ON! MWUHAHAHA!

[@hermanlai6035]

woah so meta

[@1188duneman]

Orange Mod Works 8kg spring works beautifully!

[@fletcherclausen4349]

in one of your vids (I think the toy story k26 vid) you had green balls but did no know what they were called the are "Ballistic Balls" Here are some Attachments for EIR 1- single boom co 2- 3 boom co 3- 6 boom co 4- nerf nitro 5- Ballistic Balls 6- Zing Firetek Rocket 7- molle 8- dude Perfect arrows 9- Faux Bow arrows 10- rebel / zomstrike arrow 11- Xploderz 12- Tek Recon 13- Vulcan ammo belt 14- Zing Air Z-ammo Suction Cup Arrows 15- Hog Wild Power Popper

[@RoryStarr]

I like the new intro. I liked the old one, but it was due for a change.

[@CaptainXavier]

Way over due. I plan to have a different intro for each major series.

[@insimniac]

Hey I was wondering if you could make me a minimised deploy so I can finally like the thing

[@stevenpeven258]

I suppose if you could get your hands on stronger replacement parts for the judge internals, you could possibly get a stronger spring in there

[@hell5928]

What a coincidence Captain a week ago Goodwill brought mine.. You can keep the judge I'll bring the Law. Almost 10 kg of spring without upgrading the catch spring.Where was this video a weekend ago when I was studying Law.

[@CaptainXavier]

:D

[@NoBoDipReMiuM]

When the judge came on the table i heard a very quiet...yesssss

[@BryanWasHere89]

Nice surprise. I want a Lawbringer of my own someday. Also, I had a thought. The Judge has a lot of dead space in the revolver section. What if you were to make a smaller (maybe only 4) Sledgefire shell revolver for an air blaster attachment?

[@Jimmytoehandle]

Oh yeah it does dig into your hand

[@MexicanWaffIe2]

that lawbringer upgrade spring may have been the longshot front pump spring

[@helpdeskconfessions]

I wonder if you can turn the Judge into something akin to a mortar. I know Walcom turned it into a bazooka revolver with a compressor, and with the weight, I don't see a benefit to holding it all day.

[@jameskirkland6916]

The lawbringer in my experience has less sturdy internals than the hammershot, but I would still try the mod I do for hammershot here. I take two stock hammershot springs and twist them together for my spring upgrades. It is significantly tougher than an 8 kilo spring, and I have never had an issue with catching. The only caveat is for that for the love of all things sacred, do not dryfire it.

[@lastwymsi]

I LOVE THE NEW INTRO!!! You should make varients of it and swap them in and out each episode.

[@CaptainXavier]

That plan is to have different intros for each regular series.

[@1Scimetar]

No idea if a tech-6 spring would work for supplementing that of a hammershot, but the one I have is the same diameter as the standard N-Strike Elite springs that are found in stock retaliators, rampages, and EAT's

[@Isheian]

On the lawbringer, you can double up hammershot/lawbringer springs.

[@jakedumanphotos]

🤣 I about laughed like an hour and watched it about like 30 times but nice intro

[@scarletsurge5624]

if you want a noticeable difference doublestrike spring in the lawbringer or any hammer prime blaster so far and get it or you could put in 3 springs from the shotgun pistol knock off thing youv already tried for K26 to get over 100 fps (if you upgrade the seal and all that)

[@abquintic]

Possibly that spring came from a Rey/Han Solo blaster?

[@snooobz2545]

I *love* the new intro

[@CaptainXavier]

:D

[@KerinKoure]

I believe that half compression doesn’t damage the spring the only reason why leaving the blasters primed damages it is it’s it it’s apex compression which is what causes strain

[@radioactivesdesigns3554]

Great work as always. Always love watching these. But.. Heres a series idea.. Can it take a k12?

[@astergen6920]

The law ringer is my favorite rifle

[@spazzofspeed]

Sick new intro, Cap!

[@christianbarnes8931]

loveing the new introa

[@jcj94brony]

If you could figure out a spring powered, magazine fed, automatic blaster, you'd have made my heaven in Nerf form. I've got a few concepts rolling around but they all use monster sized shells to act as the mechanism for firing the darts, which - while it works fine in theory - leads to seriously low FPS readings without even *larger* shells. Having said that, I'd settle for a tube mag blaster that doesn't suck.

[@CaptainXavier]

That would be the Stampede...

[@austinm4560]

cap, you can double spring hammershot, but to let you know, when i tried priming it with double springs when the shell was open it did not catch but when i closed it it will work fantasticaly

[@kiritoblackthedemon6586]

That intro 😂😂😂😂

[@CaptainXavier]

:D

[@philipsmith802]

Modulus line = inspired by the attachments from Call of Duty Zombiestrike line = CoD Zombies Doomlands = Fallout + Red Dead Redemption Rival = Super Monkey Ball Alien Menace line = Halo??? Impact Zone = the obligatory ice level Hasbro knows how much money video games make.

[@LUCHATHOR13]

I cut a small section of 1/2 inch cpvc and used that as a spring spacer in a hammershot.

[@CaptainXavier]

Sure...if you want to be cheap about it. :P

[@LUCHATHOR13]

Captain Xavier it was the curators hammershot. :D Hahaha!

[@alexelliot2443]

I found a k 26 (14 kg) spring at home Depot

[@0ptimusv0ltr0n]

For some reason I like the look of the judge without the extra shell. Maybe attach a jolt to one side and a bigshock to the other.

[@brianmurphy7092]

Screw the spring Imma jus put washer sooooo much pooooooooooowwwwweeeerrr

[@Luke-ko4qo]

Loooooove the new intro

[@CaptainXavier]

:D

[@EDSKaR]

Is that.... is that a rapidstrike in the intro? Filming in advance of the next April fools video? The Lawbringer stock is woefully too short for even a child, but I REALLY like the idea of a revolver rifle/revolver carbine. I want to get my hands on one so that I can extend the stock, maybe with a slingfire stock (BECAUSE THAT ISN'T THE OBVIOUS ANSWER ¬.¬) But I do really like the look of the Lawbringer barrel. Every time I think about how to improve the The Judge, I always end up with a lanard triple shot. Either that or some hyper complicated sledgefire shell ejecting monster... that looks like a lanard triple shot. I like the new format, let's see if it's popular!

[@Telemachus2814]

Have you guys ever played a game where your blaster/weapon can "break" by being hit by rounds? P.S. I love the new intro.

[@CaptainXavier]

+Telemachus2814 not that I know of.

[@zeroblade6599]

But that would finally give a reason to use the 40 jolt body armour loadout

[@musaaydogan4292]

I don't do that but what I do is that once it gets hit by a round you have to take it to the mechanic to repair it which takes 30 secs

[@Telemachus2814]

That's actually pretty interesting. So you can get your weapon "broken" but have it be fixable once you get to the mechanic.

[@musaaydogan4292]

Telemachus2814 thanks I have only been doing it for a couple days so I just invented it

[@larce4158]

From my own experience, adding a knock-off Jolt spring to my Sweet Revenge together with the stock one, and it got a nice boost. Maybe the spring that you put in it is something like that? Edit: I'm talking about the spring you added to the Lawbringer.

[@brianng9765]

i've just recently subscribed to you, so i didn't look through all your videos yet. but have you tried to put a k26 to vortex blaster? and btw, what's so special about the k26? i'm from the airsoft community, still new to nerf blasters

[@CaptainXavier]

Yes, I covered Vortex Blasters. They cannot as they do not use compression springs. They use torsion springs. And K26 is strong, cheap, and fits in lots of Nerf blasters.

[@hunzhurte]

the new intro is a nice detail

[@hunzhurte]

wonder if it is just for this serious cause that would make sense.

[@CaptainXavier]

It is. I plan to make a new Intro for every major series.

[@hunzhurte]

That's very nice. By the way I am watching your videos from Germany so greetings from the Bratwurst-Country!👋

[@gazashotshell9099]

It would be cool to see all the blasters that could and couldnt take the spring in different piles to compare the ammount

[@adamvanleeuwen3104]

that is cool! nice channel!

[@CaptainXavier]

Thanks!

[@Daonehelios]

You captain Xavier

[@CaptainXavier]

You Ghostly Fire

[@viiem2876]

you Captain Xavier

[@bobthegaminggod2564]

I just had an amazing idea. Take a judge make it motorized, cut off the handel, and make it arm mounted. Shield shotgun.

[@jetaviator158]

Love the intro cap

[@CaptainXavier]

:D

[@aayushyularen8882]

first k26 video was published november 2016. wow

[@ashleyl3861]

Love that intro!

[@adamwilson3104]

Captain! I'm planning on steampunking my judge this week, but I'm debating on if i want to make it semi-war practical or not. With k-26 do you think it's worth it to brass the 30 barrels of the judge?

[@CaptainXavier]

I doubt it. I would be surprised if it would even be able to fire, honestly. Maybe a partial brass barrel. But it was so weak I would be worried about it not having enough power to clear a brass barrel at all.

[@ethanellard9057]

hey Cap, i was wondering if you could take a look at some cheap airsoft springers (ukarms as an example) and see if any of those springs would be compatible/ viable for Nerf?i think that would be a cool video/ experiment

[@joshua5483]

The Judge looks like a nightmare to get open

[@CaptainXavier]

It is.

[@j.evanroy4683]

For the sake of all things modular, could you mod a Lawbringer for the stock and front barrel to be removable and compatible with the N-Strike stuff?

[@hazard4349]

I just use a bunch of rubber bands on a EX blaster, hahaha

[@logankunkle1039]

Captain xaviar you don’t need to work about chopping the law bringer cause they already did it for you with a different blaster

[@CaptainXavier]

+Logan Kunkle the Negotiator only holds 8 rounds so it is no better than an upgraded Hammershot. I want the 12 rounds.

[@logankunkle1039]

Captain Xavier very solid point and thank you for making entertaining videos and very helpful tips on making my blasters a lot better

[@CaptainXavier]

:D You are welcome

[@chatotalks5325]

I wonder if the BOOMco crank force (the BOOMco gun with a spinny crank on the right side) can take a K26?

[@jilliankatz3184]

nice video

[@ubergamer0198]

TWO WORDS!! JUDGE ABSOLVER

[@whuttontarnation2484]

Yay

[@jenlewis484]

Sweet intro man

[@doodlebanger4574]

12:12 HOLY HECK!