Can it Take a K26? - Episode 9

[@Soviet_Kitty]

Ah yes, the Tec-3. If blaster tags count, it's relatively viable for tagging if you throw the whole thing at people.

[@CaptainXavier]

Only at short ranges. It has horrible aerodynamics. :P

[@masonsgang3812]

The tec-3's today are actually decent

[@alexssuperchannel8330]

Lol

[@clownienerf]

I was quite impressed with the little blaster. Crap, but way better that I thought. Glad to see you might find a use for it other that a spring doner.......though it kind of was.

[@kiiranoz4802]

clownie nerf hello clownie

[@irishjoshplays636]

clownie nerf it's a xshot micro

[@marvintan9639]

No its jaru ultra foam shot

[@dr.jex___]

What response will I get if I say: "Put a K-26 in a Strife."?

[@CaptainXavier]

Wait for it... ;)

[@dr.jex___]

Dear God, what have I done!

[@CaptainXavier]

You were not the first. This is a plan long time in the making. :P

[@tetrisking8054]

you would get a response saying that u spelled stryfe wrong

[@bennycheca9426]

TetrisKing805 technically he didn’t the first stryfes were spelt strifes (the original models that are slightly better that are worth a little more than a new one)

[@doorguner01]

The second one is more of a harmonic then a clip fed system!

[@dewitt3453]

The third one is a dollar general exclusive, I’m not even kidding

[@OCNerf]

That red one comes in a generic 2 pack from Big Lots. The clip fed green one might be a knockoff to the X-Shot version of the same.

[@rzrider683]

Can you make a modular sledgefire? Maybe from the one you used in the drain blaster attachment?

[@soccerfc3021]

can you make a video on the suaside jolt that walcom metion in his video about your Loadout please

[@EyeLoveTheWiimote]

Quick question. New to modding, I was wondering can you double up on Strongarm springs? Will it be able to use two springs in a strongarm?

[@CaptainXavier]

Probably. The Strongarm can take a K26 so it can probably take double. The issue will be compression. Generally if you are going to add a spring it needs to be bigger or smaller than the original so they compress around each other. Otherwise they get in each others way and you can my prime it.

[@EyeLoveTheWiimote]

Captain Xavier Thanks alot! Gonna have to find some K26 springs online then.

[@stalinyourleader3846]

You should make a remote control turret mount, with a camrea, using the dual Hyperfires.

[@justarandomtechpriest1578]

someone made a dual nemesis he should use that instead

[@stevenshade5358]

You could make the tek 3 barrels into Stephen absolver

[@sweatychaw3105]

Dude! You're almost at 10k!

[@benjaminscanlon6041]

well at least he deserves popularity unlike some channels, naming no names.

[@CaptainXavier]

An so fast! At 10k I will be giving away another blaster. :D

[@joshuellejulian8058]

Captain Xavier I hope I win though

[@l.benjamind.9003]

Would anyone know if EBL batteries are any good for nerfing applications? It's pretty hard to find IMRs these days and I don't want to buy a piece of junk.

[@dragonblaster-vu8wz]

Luis Benjamin Diaz I have seen only good reviews for them I think one guy had an issue, but he contacted the company and they fixed it

[@mr.grimztache8309]

Will you be doing any bows? i just got a brand new stratobow for dirt cheap and i love it but not sure on modifying it or even if it can be cant find anything online

[@alfie2229]

Great thanks 👍 I am modding a double down into a pirate shotgun.😃

[@alfie2229]

Cool I've sent it to you through featured fan mail.😁

[@crimsonbisoninc.5523]

that green blaster is a beast. used the stock spring and threw it into my sharpfire for over 100 fps

[@CaptainXavier]

Nice!

[@JoeKen]

0:56 NEVER SAY THAT WORD AGAIN!!!

[@benjaminscanlon6041]

blame me, i requested it multiple times!

[@CaptainXavier]

What word? BuzzBee? Is BuzzBee the word I am not supposed to say? It's BuzzBee isn't it? I will try not to say BuzzBee again...much... BuzzBee.

[@siccdab853]

Captain Xavier BuzzBee.

[@bryansuh1985]

Captain Xavier buzzbee what's wrong with buzzbee. what do you have against buzzbee. do you like nerf or buzzbee. buzzbee seems like a knockoff. .. buzzbee

[@CaptainXavier]

BuzzBee. Personally I think Buzzbee has come along way lately. When they, Buzzbee chose to make their newest blasters compatible with Nerf magazines it showed that they, BuzzBee, where putting the fun of the users above profit. Also, BuzzBee gave us a 12 round Mega dart mag and that is cool...now I just have to find one. Furthermore...BuzzBee.

[@madeline4082]

Please do the swarmfire. The swarmfire is my favorite blaster but it really needs a performance upgrade. Edit: or just answer me in the comments.

[@gamerguy425]

buzz bee sticky darts are so horribly fragile I'm surprised the heads didn't blow off with each shot even with THAT little power out of the tek-3

[@andrewkim3118]

where do you get all your upgrade catch springs

[@CaptainXavier]

Mostly from dead blasters. That and Home Depot. Retractable pens. The fingers of baby robots I kill. The usual places.

[@creaturedanaaaaa]

also the squirters from empty shampoo bottles might have some of the correct size.

[@Pablo-fh7cd]

It's nice being early

[@supahvaporeon]

The shotgun pistol and the clip pistol are actually part of a quad pack value brand at Big Lots. No clue what brand, but I highly doubt anyone cares.

[@CaptainXavier]

I concur

[@StevenGonzalez-pu7yc]

the little clip pistol is saw today at rite aid it was in a pack called foam soft blasters 2 pack and it also came with a knock off teck 3

[@Boomtendo4tw]

did you get to that mention about the xploderz?

[@wille3573]

I've always wanted to see a nerf hidden blade, or maybe gun. Maybe a quick deploy hidden gun?

[@cartermclendon4282]

im getting an n-strike alpha trooper (yellow aka oldest model) and i want to know which spring can really upgrade it since i know its range is bad but only found out now that its coming. like to help xavier see this!

[@CaptainXavier]

OMW is still my go to for Alpha trooper parts. But I have not tried their kit in an original, only the elite. I'm not sure how big of a difference there is. There are other tricks. Regreasing and checking the O-ring (if the seal is poor add some teflon tape). And you can always tinker with springs if you have any extras. But honestly I would recommend a stage 1 OMW kits.

[@cartermclendon4282]

Captain Xavier thanks,i plan to mod and integrate but i dont know the parts or what to use,this is helpful. i asked about the normal one because older ones seem to have bigger parts. now i just need to find a guide that shows how to spot certain parts

[@SynapticWyrm]

Captain Xavier. can a doomlands persuader take a K26?

[@CaptainXavier]

We will find out soon!

[@SynapticWyrm]

Captain Xavier Thanks. It's one of my favorite pistols along with walcoms M6 pistol

[@daivdninjabiomech7888]

ah, yes the persuader. second only to the hammershot (in my opinion)

[@SynapticWyrm]

ninjabiomech gaming My favorite pistol is the cycloneshock

[@ski4965]

+ninjabiomech gaming Ah, yes I love the hammershot!

[@elieppel9315]

Dear Captain Xavier, I am curious, how did you get this angle, and can you do it with a dslr? I got a desk and I like the setup you have

[@CaptainXavier]

I have a mount connected to the rafters of my shop so the camera points straight down.

[@elieppel9315]

Captain Xavier ok thank you, and if you are interested, i am doing a chrsitmas giveaway!

[@gavturgoose1427]

what would be a good starting primary

[@CaptainXavier]

It depends on the game and your play style but it is hard to go wrong with a Stryfe or an Alpha Trooper

[@astronautical2331]

What are the best springs on the market right now?

[@dragonblaster-vu8wz]

Astro Nautical try Orange Mod Works or Blaster Parts, no spring cutting or stretching required, just open up your blaster and replace the spring

[@joshuellejulian8058]

capt. is it possible to put a maverick barrel on a strong arm??

[@CaptainXavier]

I have no idea. Why?

[@rzrider683]

Can you modify a sledgefire shell so it shoots a single mega/single elite?

[@CaptainXavier]

You could but it would be a pain. I do want to buy some of the 3d printed shells.

[@aidangreenfield3374]

the ONE NIGHT I Don't STAY UP! I MISSED EARLY CREW 😥

[@oradventures1566]

Big Chief hi

[@oradventures1566]

Big Chief are you big I mean fat

[@aidangreenfield3374]

Ollister 101 why?

[@brafricaon5723]

Hello Xavier, but i have thought about your modular attachments for a while now. Marshmallows. You still need something to launch many sizes of marshmallows, even though i doubt any nerf wars of any kind would allow it. You still need it

[@CaptainXavier]

Well most of the barrels would fire marshmallows, it would just be a matter of getting the right sized mallows.

[@rzrider683]

Can you ever make a strayven, except instead of a stryfe you use a minimized rapidstrike?

[@CaptainXavier]

I can, but I don't intend to. I do not muck care for Stryvens. I think they are a waste of a good Rayven. There are far easier ways to get a mag holder in your stock.

[@joshuacunningham4675]

Captain Xavier can the nrf search fire take ak26

[@CaptainXavier]

I assume you mean SurgeFire? I don't know, I don't have one yet.

[@epeman1954]

Could i have that tek 3 spring?

[@meroastisruined3039]

Does anyone know if the Longshot can take a k26?

[@evanhoing2212]

Nathan Beck yes

[@jamesdoherty3333]

It can

[@mr.anonymous1439]

Yeah, until your stock internals break because they are made of ABS!

[@meroastisruined3039]

Mr. Anonymous. Yeah, would like to have a remedy metal powertrain kit

[@bryansuh1985]

can a magstrike take a k26

[@siccdab853]

Bryan Suh Best joke.

[@bryansuh1985]

Kylo Fuckboi can a hyper fire take a k26

[@bryansuh1985]

Kylo Fuckboi can a rotofury

[@bryansuh1985]

can a modulus

[@bryansuh1985]

Kylo Fuckboi can a Vulcan... I'll stop now

[@matteooballa3581]

Captain Xavier. This is gonna sound dumb but can a rival Apollo take a k26?

[@CaptainXavier]

I have not idea. Rival is on the list.

[@ivoz_fts8984]

Can it take K26? knock-off edition

[@sileondoesthings]

I used to have that red dial shot blaster

[@josephcarolanhall638]

do a k26 episode with the new alpha hawk and falcon fire if you get them

[@henrynguyen7118]

Can a nerf modulos gun stalk take a k26?

[@cirava]

GenericGenji DURGEN ha, funny joke!

[@rzrider683]

Any vid today?

[@0ptimusv0ltr0n]

I made a absolver out of the buzz bee barrel or one that looks just like it

[@0ptimusv0ltr0n]

After double checking I think it was a similar triple barrel from a larger buzz bee pistol

[@jensontaylor4801]

Nerf flipfury sledgefire and rough-a-ma-cut

[@julianfiladoro8635]

Sir, you simply must make a shoulder mounted Vulcan wired to Eir. Walcom would lose his mind

[@CaptainXavier]

Oof...that would be heavy as hell. I actually already have 5 Vulcans wired for that. I'd just have to figure out how to mount the thing...

[@julianfiladoro8635]

Captain Xavier you could cut all of the wasted material off of it, I see where you're coming from though, they are very heavy.

[@jensontaylor4801]

bud attack rapid fire

[@coatduck]

Box Spring K26 upgrade when?

[@CaptainXavier]

coatduck Are your box springs in need of an upgrade? Just whay have you been doing on them? O.o

[@coatduck]

I like em *firm* IF YOU KNOW WHAT I MEAN

[@coatduck]

I mean I get back problems easily and if my box spring is too soft I get all bent out of shape.

[@gunslingergoat9830]

Do a k26 on the air zone digi-fv built in by air zone or the deploy

[@stephenventura4680]

Captain Xavier I have a fire strike that I modded I put a piece of 1/2 in cpvc barrel on it and along with the stock spring I put a maverick spring if I send it to you will you range test it I don't have a cronograph

[@CaptainXavier]

Sure

[@stephenventura4680]

Captain Xavier Nice I'll have to send it to you may be a while tho

[@happyturkeyday]

I have some bad news The super strong carbon fiber 3D print filament does not work on my printer So the 3D printed stamped gears sadly are going to what until I find a strong filament to use and 3D aouto desk likes to not work. But I will send something cool that designed!

[@CaptainXavier]

Yay!

[@happyturkeyday]

Captain Xavier want like 2 7 shot hammer shot cylinders

[@happyturkeyday]

I found some stl files for them on thingavers

[@metalandmayhem0660]

12 in the MORNING?!

[@xaviermunoz5357]

the third gun is an xshot line

[@joshuellejulian8058]

Good video senpai :]

[@CaptainXavier]

Thanks.

[@joshuellejulian8058]

Captain Xavier no need to thank us.....we need to thank you for making us happy.For your awesome contents (sorry for my English I'm from Philippines)

[@TheDenofBadgers]

Captain Xaiver how about you try to stuff 6 k26 springs into a nightstrike or one of the many of the clones it has.

[@CaptainXavier]

The Nightstrike? I am not familiar with that blaster.

[@kalebmorris7775]

www.walmart.com/ip/Banzai-Laser-Stream-Night-Strike-Water-Gun/19582829 A water gun cx?

[@TheDenofBadgers]

Meant night finder, lol, was kind of asleep when I posted this comment.

[@ethanburton2289]

How much are k 26's?

[@CaptainXavier]

Mine were $12 + shipping for 5x 11in springs

[@jacobb6525]

I think the only upgrade the tek three can take is a K526

[@rzrider683]

What is the red thing called?

[@CaptainXavier]

I have no idea.

[@vibecheck7378]

BUZZ BEEEEEEEEEEEEH

[@seizedcarcass8440]

The tech 3 is actually not terrible but it’s barrels need a lot of work with brass or PETG it’s really not terrible

[@lucasf1035]

can teh deploy taek K26?

[@CaptainXavier]

I don't know yet. We will find out though. :)

[@commanderwolf_gaming5191]

do you have a quick 16 to do a video on

[@albundysrecliner9112]

can a rough cut take a k26

[@CaptainXavier]

It would require 2, actually, and I suspect the gears could not take it...but we will find out eventually.

[@othx9625]

Hi I was going to ask can you do rival line please.

[@CaptainXavier]

I will...eventually. I only have the Apollo at the moment. I plan to do them when I have more.

[@fondestdiamond]

HAMMERSHOT K26 EPISODE PLEASE

[@rzrider683]

Are you going to NvZ in ohio, this june?

[@CaptainXavier]

I would like to, no idea if I will be able to yet.

[@rzrider683]

Captain Xavier really hope you can go, I am almost positive I will be there since I live in Indiana lololol.

[@milancarpenter6323]

please do an episode on xshot blasters

[@jake_stvbc1305]

next episode of k26 do the speed load 6, and the hammershot

[@SkersN2004]

its boomco without a shield

[@SwagMoneyIndustries]

I... don't think I need to say anything.😝

[@baconlord9062]

Then why did you

[@elliejohnson2786]

Buzzbee tek-3? Wish they had a buzzbee tec-9...

[@gabrielgarcia9822]

a tek 10 exist

[@drunkmann9166]

how about a mega centurion?

[@alectantheapache6261]

Tyler Willes it has a huge plungertube so maybe?

[@thefandomconnoisseur8518]

Captain Xavier do you watch RWBY?

[@CaptainXavier]

No

[@thefandomconnoisseur8518]

Captain Xavier never heard of it or do you not like it? i ask simply because its amazing and there are a few nerfers that take the insane weapons and make them IRL out of nerf blasters

[@CaptainDugog]

thunderbow?????

[@CaptainXavier]

I should get one of those...

[@joshuellejulian8058]

DJ TOXXIN my thunderbow brakes it self....:\

[@anonymousprime1738]

Can a jolt take a k26?

[@endymion7585]

Anonymous Prime No, he has already covered it.

[@vinhdam216]

Can a centurion take the k26

[@CaptainXavier]

No idea...but we will find out someday. :D

[@dragonblaster-vu8wz]

I hear people talk about suicide jolts all the time, but I think suicide tek-3 blasters are better for this

[@CaptainXavier]

The point of a suicide jolts is to save the last shot for yourself...why would you need three shots for that?

[@Kb-eb4ur]

hello captain xavier

[@CaptainXavier]

Hello

[@gearz3188]

are you doing something with a hornet i think i see a hornet piece

[@CaptainXavier]

Nothing to see here! :P

[@gearz3188]

Captain Xavier :p are you minimizing one? because that's the titian pump part

[@CaptainXavier]

I'm sure I have no idea what you are talking about. :P

[@gearz3188]

Captain Xavier lol :P do you think i could make it so it's hooked up to a compressor (so i can still pump it) using that part?

[@CaptainXavier]

Yes

[@baileyferns1741]

do can it take a k-26 with the nerf stampede

[@CaptainXavier]

I could try but I can almost guarantee the gears would tear themselves apart.

[@baileyferns1741]

I would just like to see what happens

[@lol-dn6nx]

what the hell is a k26

[@CaptainXavier]

It is a spring sold by McMaster-Car. So named because the last three characters in the part number is K26.

[@justterrance7876]

do the sledge fire

[@camkillzombie9289]

Do a video where you only use buzbee guns for an episode

[@CaptainXavier]

Give me time...

[@darcyjames8041]

Evening captain, I believe I'm early😬

[@bryansuh1985]

Darcy James EARLY IS WHAT THE CAPTAIN EXPECTS SOLDIER. ARE YOU EXPECTING A MERIT BADGE FOR BEING EARLY? DO 30 PUSH UPS DOUBLE TIME. UNDERSTAND ME SOLDIER??

[@CaptainXavier]

Somebody make that man a Sergent...

[@darcyjames8041]

Bryan Suh 1,2,3,4,5,6,7...ehhhh8,9,10....

[@seizedcarcass8440]

Please make and insane tek three in you colors and run it in a war

[@crazyfry6028]

hi what state you live in?

[@crazyfry6028]

asking because i want to meet you

[@crazyfry6028]

best nerf modder ever better than drac

[@crazyfry6028]

and you should some how add a magstrike to your loadout pls

[@bryansuh1985]

Glaz fog I hate the mag strike

[@crazyfry6028]

next episode maybe recon raider alpha trooper and ummm a um a furyfire no already done speedswarm if not already done

[@archiecarter5431]

I have the second gun

[@keocarlton1426]

do a deploy

[@metro_5017]

its a tek 2

[@chanceduncan1105]

no offence but your mask looks like deadshots mask

[@CaptainXavier]

Why would I take offense to that? Heck I have considered getting a second one and painting half of it orange. :P

[@siccdab853]

Captain Xavier That's Deathstroke, lol. Deadshot's mask is white and red.

[@CaptainXavier]

I am aware, my point was I already want to make it look more like a comic book character so having it pointed out that it already does look like a comic book character is hardly going to hurt my feelings. :)

[@herroprease3228]

Kewl to be early lelz

[@byronpratt9697]

I like the tek 3 for indoor nerfing

[@elenakovalev5416]

morning

[@CaptainXavier]

Good morning

[@ArmegeddonCraft]

stop uploading so late!!

[@cadekontny3645]

Noah Jaques

[@nsn333]

tri ad

[@JoeKen]

4th

[@Everything-zi6tn]

5th

[@michaelzupidi6597]

Tek 3 downgrade. Not upgrade.