Can't Afford a Winchester Pre-64? Buy This Rifle!

Have you always wanted to own a Winchester Pre-64 Model 70 but just can't swing the cash? It's true, the Winchester Pre-64 Model 70 has many desirable features but due to it's high collectible status it will cost you a pretty penny. In this review we find out that the Husqvarna is comparable to the highly sought after Winchester in many ways...but not the price tag! Husqvarna could be on it's way to an increased collector status of it's own. Join me for this review and afterward you decide what you're willing to spend. Comment below and don't forget to subscribe. Check me out on Patreon for more informative videos. Thanks for watching!
/ usog
/ officialusog
www.paypal.com/cgi-bin/webscr...
Music: www.bensound.com

[@jiveturkey9993]

I would believe this guy's gun investment advice 10,000%.

[@erickdunlap6415]

I don't own a firearm and have been watching KZbin videos over the past few months to try to expand my knowledge on the subject of affordability , utility , and reliability to make my fist purchase be a good one. This is by far the most enjoyable and informative channel I have come across out of the dozens I've watched . Keep up the great work

[@UnitedStatesOfGuns]

Thank you erick - I am so glad my channel is okay.

[@scottthorning3963]

You want to pay attention to this guy

[@flintrichards945]

I would love to have a Husqvarna 8x57 with a old model 48 aperture sight. I love the Winchester also.

[@u.p.woodtick3296]

Craig Dyer sweet

[@linusmcminus7852]

You are so incredibly well spoken. I always throughly enjoy your videos with my morning coffee.

[@kennethbailey2616]

I think one of the reasons you’re so popular is that you understate your vast knowledge and we can relate to you so well. If I listen to an “expert” and if I perceive arrogance I turn them off. You get your point across so people at all levels of expertise can listen and learn and enjoy your subtle humor.

[@UnitedStatesOfGuns]

Thanks Kenneth - I try and I appreciate your comments.

[@flintstriker2791]

I've always thought a detachable mag on a hunting rifle was a big advantage & I've never lost one. If you have to travel on a roadway the gun usually can't be loaded & you can just pop the mag out. Otherwise you have to fumble with individual rounds. The mag is more convenient for me. Your channel is a treasure.

[@UnitedStatesOfGuns]

Makes sense Flint

[@falseprofit4u]

"They go bang and probably hit something." Sums it up perfectly.

[@Me2Lancer]

Thank you Mike for this insightful comparison between the Winchester pre-64 Model 70 and Huskvarna rifles. To me the pre-64 represents the apex in production by America's most recognized firearms company and the representation of the pre-64 is unexcelled. That said, Huskvarna has been in business since the 1600s and much of that time as been producing weapons. As a Swedish company Huskvarna has access to what has been recognized as the highest quality steel anywhere. The best part is any of the rifles you presented to day would be worthy additions to a collectors inventory.

[@edwardabrams4972]

I just want to thank you Mike for turning me on to the husqvarna rifles! I have found and bought one from the 40’s that the metal is in great shape and just needed a new custom walnut stock and some rebluing and one of the last CRF models that is in Imperial model that I barely missed out in buying but the other guys back ground check failed so I got the rifle and it is every bit as nice as my pre64’s and maybe better and will be a safe queen other then taking it out and rubbing my hands up and down the rifle and shouldering it so I can drool one more time! That being said I do love my pre64’s and when I was just a young lad in the 50’s my dad did all his hunting with a feather weight in a 308 and his millworker friend would handload these new bullets that were starting to get popular that he got from some guy in Ashland oregon named John Nosler and I have dreamed of owning a pre64 ever since and now have several and have gifted several to my very close friends who always dreamed of owning one too but who no fault if their own could never afford one just to see the look on their face when you hand it to them and to see a grown man cry!

[@UnitedStatesOfGuns]

Hi Edward - There are a few good men; actually lots of them - and you're one. I'm glad to have helped. I picked up a Husqvarna in 7x57 - not easy to find - and what a jewel it is. They're all far better than anything reasonably priced today; but you know this. Your noble giving is one of the finest things one can do. I wish you all the best and good shooting!

[@edwardabrams4972]

It’s interesting because my best friend is a pre64 collector and I am a Husqvarna collector and it’s like finding a hidden treasure each time we come across either one and they both make fantastic hunting rifles even though I have custom builds that are a lot more accurate!

[@Nosferatu1022]

I like when the piece of brass falls back into mag well on that last shot in the intro.

[@Dano.1989]

I’ve bought and sold many Husqvarna rifles. They offer great value for what you pay for them , especially here in Canada. I once had 1900 model in .270 that was brand new , never fired. I still regret selling that rifle.

[@pseudopetrus]

I wish I bought that one from you!

[@boomstick4054]

I even regret you selling that rifle.

[@smolboyi]

Is it rude to ask how much? I would like a Husqvarna..

[@Dano.1989]

@@smolboyi I paid $700 for it at the time ... I would expect it to sell for about $1000 CAD or more now.

[@smolboyi]

@@pseudopetrus Oh nice, sounds like pretty good investing

[@easttexan2933]

I have always considered the Pre64 Mod 70 the best ever and that will never change for me but as we have discussed in previous videos, the Browning FN Safaris are a wonderful rifle also and this is what I see in the Husky. Any decent well made mauser action rifle is going to be a wonderful platform from which to shoot little pills. The upgraded stock shows off very well. Excellent review Mike. Thank you.

[@JDWard-Jeepster]

The early Husqvarnas are actually FN made up until they went to the lightweight small ring mauser 98. Beautifully made, my only complaint is the trigger is non adjustable and nobody makes a better trigger, Timney used to but doesn't anymore. If you can find a J.C. Higgins model 50 they are also made on the FN Supreme large ring action. Quite a bit cheaper too.

[@PlanetRibooted]

I’d like to see you compare the CZ550/ BRNO commercial mausers to these.

[@henrikchristensen6314]

I like the idea, and too one with the old 600/601/602 with built-in diopter in the rear scopebase. I guess the Husky will come out on top on finesse, but the 600series on ruggedness. Love all three

[@frankwebster6082]

This was an excellent video and very informative on the Husqvarna rifles; thank you and stay safe and healthy.

[@tedpfenninger4972]

Really appreciate all of your videos. Great common sense advice. I own both pre-64 M70s, 03 Springfields,, a Husky, and an FN Mauser. They are all ,real nice and feed smoothly. Like you, I believe, dollar for dollar, you can't go wrong with a good 98style shorter. Thanks!

[@benjimenfranklin7650]

Zastava makes some great rifles as well and they are affordable too.

[@TheQCollection]

Thank USOG for your wonderful video's, I'm a subscriber to your channel and haven't missed an episode since subscribing until this past few weeks, unfortunately we lost a family friend to this Covid Virus and it's been a sad time for our family, yes life must go on and seeing this video brought a smile back on my face. Also if possible can I give a big shout out to all our first responders including my wife who is also a first responder and to you and your family and everyone on your channel I hope you all stay safe. Thanks again.

[@UnitedStatesOfGuns]

I'm so grateful to you for your kind words. I am praying for your friend - he is in a better place now - and I pray for you; and your family. I thank your wife for all that she has done, and continues to do to help. The world if full of goodness and light. Invictus (I changed it a bit) Out of the night that covers us, Black as the pit from pole to pole, We thank whatever gods may be For our unconquerable souls. In the fell clutch of circumstance We have not winced nor cried aloud. Under the bludgeonings of chance Our heads are bloody, but unbowed. Beyond this place of wrath and tears Looms but the Horror of the shade, And yet the menace of the years Finds and shall find us unafraid. It matters not how strait the gate, How charged with punishments the scroll, We are the masters of our fate, we are the captains of our souls.

[@burkhardtkleiber567]

I was fortunate to find Husqvarna 1100 sporter in 30-06 about two months ago. A superbly built rifle! In my mind the first comparison I made was to the pre64 model 70. If I remember correctly Bill Ruger stated that the Husqvarna bolt actions were the finest production sporters ever made. Buy one if you can.

[@UnitedStatesOfGuns]

Glad you bought one - why they stopped making them is a mystery - the cost explanation is okay - but people would pay; they're worth it.

[@JaysonTuntland]

I really appreciate the humble way in which you present yourself. The firearm industry could use more of that today. The more I learn, the more I realize that there is so much more that I do not know.

[@UnitedStatesOfGuns]

Me too Jayson - the well of knowledge has no bottom; I've only managed to draw a little water so far. Thank you for writing and stay safe and healthy.

[@ChitFromChinola]

As a hobbyist, not a collector, the Husqvarna is hard to beat. I was inspired by your video to buy one from 1942 - in 6.5mm Swedish, of course. Makes me smile every time I pick it up. Thank you!!

[@pseudopetrus]

I am so glad to see your video, that must mean you are OK. Stay healthy please Mike, we need you!

[@michaela.sereno5436]

I enjoy hearing you talk about the different rifles, make, models and details . Your knowledge is such a wealth of information Thank you for sharing and passing on what has been a life time of experience and said knowledge .

[@lusignans]

A great comparison between utility and collect-ability. Thank you!

[@peterpta]

That 8x57 is simply beautiful.

[@zh3401]

A most informative presentation, thank you. We agree that the pre 64 model 70 is one of the finest examples of American made bolt actions, truly. It pleased me to see you compare the Husqvarna as I have for years felt it was a very well designed variation to the M98. Superlative action, excellent accuracy. My very inexpensive 1640 in 30-06 was only $400, 95% blue, Miroku 4X32 scope and excellent accuracy. Credible, verifiable, accurate and entertaining presentation!

[@tonypaquet4123]

Very interesting! I really appreciate how you explain and teach.Thanks

[@garyK.45ACP]

I have a Remington Model 81 like the one in your opening. .300 Savage. My favorite all time deer hunting cartridge. The rifle was my grandfather's. Great rifle. Don't sell it! The later, controlled feed, Winchester Model 70s are equally as reliable and well built as the pre-64s. They don't have the collector cache, but for using guns they are great.

[@richardgonzales8502]

These Rifles remind Me of The Australian 270 that I once owned ... martial in nature ... spare of build ... as easy to swing up and shoot on the fly as lifting a slim waisted gal ; lithe of limb and a pleasure to hold .

[@davidissitt7718]

Still loving your videos David in lockdown Somerset Roe buck season on hold 🤔 Still learning off you Thanks

[@Idahoguy10157]

For a controlled round feeding Mauser rifle with history both the CZ 550 and the Husquvarna are excellent choices

[@randyschaff8939]

Hinged floor plate, two position safety that locks the bolt handle down, single stage trigger, set for right around 3lbs. barrel should be 24 inches. A nice wooden stock with some heft to it. It should be equipped with a simple rugged reliable scope like the Leupold M8 4x . Have you guessed it yet? Yes it’s the original Ruger M77. Bill Ruger’s master piece. A working man’s game harvesting tool.

[@airbornesoldieramerica7125]

Learn something every time when you put up a video. Never known Husqvarna made guns, only thought they made lawnmowers,chainsaws etc...like you said.

[@raymondwilliamblack]

better known as the SWEDISH MAUSER

[@arodrigues2843]

Those Husqvarna have the GREAT FN "Supreme" Mauser actions. They are the slickest Mauser actions made.!! I got several of those, and I don't intent to part with them, ever.!!!

[@UnitedStatesOfGuns]

100% - they only go up in value - superb!

[@dvrn86]

I picked up a beautiful Husqvarna FN98 in 8 x 57mm for $225 CAD

[@avocado9763]

Outstanding presentation. The rifles are representative of an era that's gone. When there was pride in workmanship. Today most things have very little quality.

[@gregkerr725]

Man, that light colored one you think is a Crown Grade looks like my rifle....the one I have never been able to figure out the model of. Only difference I could spot was that mine has a three leaf rear sight graduated from 1 to 3 hundred yards. I did cut the stock down some and added a recoil pad years ago...but a pro did the work and it looks factory. Mine also has an aluminum trigger guard...don't know about yours. Mine is in .308. It is a tack driver. My Dad bought it from a fellow Army Captain when we were stationed in Texas in either 67 or 68. He paid the guy 130 dollars, which included a soft case, 20 boxes of Army Lake city 147gr ball and 10 boxes of Lake City match ammo. It shot single hole with the match ammo. I still hunt with it and I even still have 2 boxes of the standard Lake City 147 ball! Over the years I shot up the rest of that Army ammo....always looked and fired like new. I'll never sell it, but I still wonder what it would be worth to someone who knew what it was. Thanks so much for posting this. I now know what model Husqvarna I've had all these years! Oh, you said they were fairly common....yet in all my years hunting or shooting at some range, I've never run into anyone who had them. It was always a conversation piece at deer camps because people think "chainsaws or mororcycles".

[@chrischiampo7647]

Nice Winchester Alternative USOG Thanks For The Informative Video I’d Buy Any Of Those Rifles 😀

[@ulflyng4072]

Beauties. One of the rifle world's well kept secrets. They sell pennies to the dollar used in my part of the world. And if the barrel is ever shot out, it pays to rebarrel it. I think the action was made by FN, but not sure. Dang, you just revealed a well kept sleeper 😉 Thx for yet an appetizing look at an ultimat gun

[@burkhardtkleiber567]

Amen

[@pjotrfalk9422]

Yes some were made by FN

[@black_jackledemon6298]

Thanks so much 😊👍 Granddad was a tiny bit paranoid "prepper". And I inherited the entire arsenal and an almost literal pallet of ammo. We have already decided to gift them to family and friends children and grand children when they are old enough to finally need a hunting rifle.(Texans) But I think you're videos are a great source for helping me suggest a good match for them to choose. $ value isn't a concern of ours with those as I didn't spend a cent on them of my hard earned money. But my money is hard earned so love to know what your opinions are on things of that nature and whether or not it's still okay to put meat in the freezer in a duel investment/use investment. Husqvarna was nice. Our friends oldest daughter has a "good eye" I guess. 😂😂👍

[@buddy22801012]

I love all the Mauser action rifles.i currently hunt with a new Winchester model 70 (pre 64) style in 308. Iv heard many experts say the new model 70 pre 64 actions are actually Made better than the original pre64. I’ve examined many new and original pre64’s and the new Winchester model 70 is a beautifully made rifle and probably the finest factory production rifle today. Collector value varies from time to time based largely on public opinion. I’ve taken a few deer with my marlin 336 in 35 rem. That rifle now seems to be much more popular now since it has a JM stamp. A few years ago no one seemed to have any real interest in these guns some of my friends actually laughed that I still deer hunt with that gun.They all bought stainless guns with synthetic stocks. But that old marlin was alway a great rifle and still is. I just find it entertaining how public opinion changes from time to time even though the facts remain the same. A great piece of equipment will always be a great piece of equipment. When you buy always buy the best you can afford at that time. QUALITY NEVER GOES OUT OF STYLE.

[@aaronwilcox6417]

Fantastic video. Some of the very best, that is the Husky Mausers and Pre-'64 Winchester. I love these bolt actions but bejng left handed I have to settle for my classic M70 338 win stainless lefty and my Ruger 77 Hawkeye lefties. This is the left handed answer for controlled feed Mauser analog rifles. Im happy to have these but i am very jealous of right eye/hand dominant folks who get to enjoy those amazing Mausers, Winchesters, CZ, Brno, Huskies, and others that are so common. These old classic Winchester and Mauser based rifles are like you say just much more of an rifle than these new robot made souless plastic stock contraptions.

[@UnitedStatesOfGuns]

Hi Aaron - Thank you! There should be more left handed rifles - or ambidextrous bolts. I saw a couple of concept rifles in the 90's - easy to switch from left to right by moving the bolt handle - but nothing came of them I guess. Anyway you're got the best. Stay safe and good shooting.

[@rick4649]

Great video. Great information.

[@boomstick4054]

Great guns, great info, great opinions,,,,,in every video you post......

[@uncleremus5046]

As usual great video. Thanks

[@oreopuppydawg1564]

Beautiful!! Excellent channel!

[@kennethbailey2616]

I always learn so much from your videos! If I come across a Husky inna caliber I can use I’ll try to pick it up. The 8X57 intrigues me greatly. I’ve never shot one but I bet they’d be excellent deer rounds.

[@UnitedStatesOfGuns]

One of the best cartridges - I've had nothing but success with the 8x57.

[@williamstuart9812]

Wonderful rifles. Earlier versions often have beech stocks which are not as tolerant of damage as walnut, but they are a bargain regardless. I like them in retro format, aperture sight, sans scope as they will take a charger/ aka 5rd Stripper clip. It is a smooth fast handling rifle for running game.

[@charlesmckinley29]

Thank you for another enjoyable video.

[@smithwesson7765]

I recall being told that the steel used by Huskvarna was of very high quality. You can pick them up in Canada for very reasonable prices. I have a pre 64 model 70 in the safe and there she remains :)

[@fredrutledge3628]

Take that 70 to the range at least.

[@smithwesson7765]

@@fredrutledge3628 She was made in 1946 in .30"Gov't"06 and I suppose I'll take your advice this year :) Cheers from Alberta.

[@paulchandler9646]

@@smithwesson7765 Frontier Firearms has a load of old Husqvarna's for a couple of hundred bucks but they all look like they've been dragged behind a truck down a country road. There was a few that wasn't to bad but i would like to see up close before buying one if i did .

[@turtlewolfpack6061]

My pre 64 Model 70 is also in .30-06 and is dated either 1949 or 1950 (been awhile since I looked up the serial number) and I am third generation owner as it came up from Oklahoma with my Grandfather and he bought it when he got out of the American Navy service in the Pacific. Although I haven't shot it yet these rifles were made to hunt and this fall she is going back out. I am also in Alberta!

[@smithwesson7765]

@@turtlewolfpack6061 Well that's interesting :) I'm ex-infantry and so I tend to shoot paper when I can. I read somewhere that a bunch of '70s were built for the USMC in '45 but, the Marines eventually went for the Remington 700. It's ironic that Hathcock and other snipers used heavy barreled Winchester '70s with Inertl scopes to achieve high scores in Vietnam.

[@chrisbusse5197]

Excellent videos!

[@user-jg8do3rp6c]

The Pre 64 is a perfect 98 Mauser action rifle, it's just that it's so expensive. Yesterday I saw a Pre 64 in good condition at a local gun show. Its price tag was $2,600 CAD.

[@edwardabrams4972]

Asking and getting is two totally different things😳 60+ years collecting fine rifles and I have owned about 2,500 rifles by my last est. I have owned many many pre64’s over the years and never payed more then $1,000. For any of them and as low as $400. For guns I was going to customize anyway.

[@Trumplican]

it's so cool Husqvarna makes/made guns I never knew that until recently.

[@jmfa57]

I've got purpose-made hunting rifles in all of those calibers, my favorite to shoot being the 8x57. I have a Winchester Safari Classic in .375 H&H that I got very reasonably online. I've never shot factory loads in it because they are so expensive, and I'm a reloader anyway. I must say that the .375 doesn't beat me up as bad as you might think, even with 270 grain bullets. The .270 beats me up a HECK of a lot more than you would think, even with a recoil pad. The 8x57 and .270 are both Remington 700s and have nice stocks, so I don't know why the .270 is so mean to me. Go figure! Great video as always, thanks for sharing.

[@Lou.B]

It's fun to listen to you talk about these guns! Would you share more about your philosophy of gun design? I saw you use a phrase recently that was so interesting and I think related to your paradigm of gun design: "The geometry of parts..." Fascinating stuff - Thanks!

[@Brook2400]

Informative! Tnx. I have a early 50's Husqvarna crown grade with mannliquer stock. Bought it in 1980 when i was 12 yrs old with lawn mowing $..I live in northern Idaho and have taken A LoT of elk and deer with that ol' gal. Chambered in .30-06...one of my favorites!

[@markcahoon2534]

All nice looking and practical guns, I wouldn't knock back any of them. You are right about a lot of new guns not being in the same league, there are exceptions, but they cost a lot for the same quality of finish as these guns have. I really liked the look of that 8X57, I am a big fan of thin stocks. Here in Australia, pre 64's arent often seen, but they are around, but it wont be long before they are all crunched up, along with all the other privately owned guns. For those that see, the writing is on the wall. Thanks.

[@stevenfair2000]

mark cahoon look

[@Paul-45-70]

I’m from Australia and unfortunately I think you are correct, all started in 1996.

[@markcahoon2534]

@@Paul-45-70 Actually thats what started waking me up to who the Government was.

[@markcahoon2534]

@Achmed Seldomsinsobar Actually, yours are going to be crunched up too, unless??? I wont say what.

[@allenschmitz9644]

Aussie's are still under the gun grabbing CROWN OF ENGKAND.

[@peanut3050]

beautiful rifles thank you for sharing your collection! -----we love all your videos!

[@UnitedStatesOfGuns]

Thank you so much 🙏

[@joelodjick230]

I LOVE the simplicity of the New Haven trigger. Perhaps some come out of the box with a nicer pull, but they don't get tougher or simpler...and its easily serviced/smoothed up.

[@UnitedStatesOfGuns]

Hi Joel - I believe in simplicity in all things. The fewer parts in a trigger the better : ) I agree.

[@mikeknowles8017]

Here's some heresy: I have a couple of Pre-64 Model 70's and I really like them. But. A friend has a Model 70 from about 1976 (what I call push feed) in .243 with a 4X scope and we took it out to the range. It has nowhere near the polish of the pre 64 but it is a perfectly usable accurate rifle. I would not hesitate to take out in the field. I also like the Mauser based rifles I just don't have one. I use my pre-64's because they were made to be used.

[@jegr3398]

After watching some of the videos on this channel, I scored an early 50's Husqvarna built on a post war Mauser 98 commercial FN action. 270 winchester. The stock had been poorly refinished and is ugly, but the metal is in amazing shape, and the price was decent because of the ugly stock. Very nice rifle.

[@UnitedStatesOfGuns]

Great purchase - you can't go wrong with that rifle; the wood doesn't matter that much; I like them in just about any condition.

[@fredwerner30]

I own a Tikka .338 mag, a Sako .223, and a Winchester pre-64 in 30-06, among other semis, lever, My favorite, without question is the Winchester. I've had it since I was a teenager, and every round I put through was on target, and smooth as silk to re-chamber.

[@avocado9763]

Wow! You are a professor of fire arms. So knowledgeable.

[@UnitedStatesOfGuns]

Thanks Don - I try. : )

[@rupertmcnaughtdavis3649]

Agree 100% about detachable magazines.

[@oncall21]

I actually think the current run of Model 70's to be superior to the pre 64 series. I like how the middle action screw has been discarded. Thanks for sharing and I'm enjoying your Instagram posts!

[@greybone777]

They look nice but check the bedding. My brother's 338 win mag blew out the recoil lug before 10 rounds and is now steel bedded. It works well now and is a very nice rifle.

[@greybone777]

The middle screw was discarded because they can't spend the time to bed a barrel that well any more. You need to own and shoot pre 64 Winchesters to appreciate them. This is true with the model 94 as well.

[@michaelrider3292]

Excellent video good source of information, it's a joy to watch..

[@nathanadrian7797]

I used to own a Husqvarna .30-06 made in 53. It was almost identical to that 8x57, I traded a Ruger 77 for it and told the other fellow I was robbing him, but he just had to have that Ruger!

[@UnitedStatesOfGuns]

Beautiful rifle - you both won.

[@bushed2743]

I like the Schnabel for-end on the old Husky better.

[@bretthl1]

FN SPR A5M is another good choice. Not exactly a collector but if you want a Mauser action on a modern platform that shoots well out of the factory it is worth a look. One thing that needs mentioning about the Mauser / Win 70 pre 64 action is the blade ejector. I really like the blade ejector over the plunger style.

[@wiregrassga]

I grew up reading Jack O'Connor's books and magazine articles when he was the firearms editor of Outdoor Life. He was a true believer in the Model 70 and I dreamed of the day I would own one also.

[@danrozanski6130]

As usual, great video. But don't forget the Zastava M70! (Charles Daly, Remington 798) same rifle.

[@adrianotero7963]

I have both a Remington 798.....which is a Zastava... but it falls way short of the Husqvarna......

[@gaerich1]

I am glad you did this the video I worked as the North American Warranty Manager for Husqvarna for several years. They are a great historic company and I would truly love to own one of their fine rifles. I was lucky enough to find an excellent condition 1955 Model 70 in 300 H&H about 5 years ago for $500.00. I would love to find a nice Husqvarna to go along with it.

[@UnitedStatesOfGuns]

You found what so many are looking for. I still like the .300 H&H best out of all the Magnum .30s and your Model 70 is as good as it gets. I hope you get a Huqvanrna - there is something in those rifles.

[@sooner5484]

Very nice thank you. Cheers.

[@MrPh30]

I had a 648 in 8x57, shot thousands, reloaded much of many different kinds. A rifle and cartridge that made me just like the classic ones. Then came the day when barrel bit worn needed new barrel. Smith said,old gunsmith who had mounted scope etc had drilled wrong ,hid it under scopemount,and then also mis heat treated it . It could be possible saved ,lot of welding,or put it down and get a subsitute for it. Thats how i got the Dwm 7mm. I miss the old Husky from time to time, it had soul,was scared ,but a fine lady,like a feral cat one get into the house, and that cuddles up and becomes part of the household.

[@henrikchristensen6314]

lol. Know the feeling

[@DinoNucci]

I truly love how older / wood stock guns look and feel. My knowledge is WAY too contemporary to buy one alone though. (like I would need a mechanic to look at a car for me before buying)

[@UnitedStatesOfGuns]

Please let me know if I can be of any assistance.

[@DinoNucci]

@@UnitedStatesOfGuns ty!

[@woodsmansfinest3814]

Couldn't be a bigger fan of your channel

[@REDNECKROOTS]

Those pre64 model 70s are just such reliable feeders. That coned breech really sealed the deal for shell feeding ease. Not sure why more makers don't cone the breeches. It's such a great feature, that's over looked in my opinion.

[@UnitedStatesOfGuns]

I agree; so simple and excellent

[@REDNECKROOTS]

@@UnitedStatesOfGuns every new rifle I see and handle I look to see if the breech is coned . Nope straight flat every time so far. Do you know of any other rifle with a coned breech ?? It just lets the shell slide right in. It's such a cool simple feature. Please if u Kno of any others w that design I'd love to know. Thanks 🙏 again

[@conlaiarla]

I own a Husqvarna M 42B in 6.5 X 55 .Truly a great quality firearm. Never selling.

[@ronlafitte6864]

I would love to own the first rifle, the 8mm Husky ! This would be a fantastic rifle and a lifelong hunting companion.

[@trapdoorspringfieldmodel1888]

Those Husqvarna rifles are beautiful, but that Carl Gustaf is just a sight to behold. They are excellent firearms and represent exceptional value for the dollar. I could say more, but I think the examples you featured speak for themselves. As you know I have a soft spot for the pre-64 Model 70 in 375 H&H and yours is a gorgeous example. I am guessing yours is from the mid 1950's, but I am wondering what year it was actually made in. Anyhow, one of these days I'll get around to sending you photos of the 375 H&H I have. Just stay safe and thank you for the video. More importantly I would like to wish you and the team behind the camera congratulations on passing the 20,000 subscriber mark!

[@journeyquest1]

Of course after this video was made the prices will skyrocket for this rifle also. Thanks.

[@kenaidog6974]

Mauser Oberndorf Sporting Rifles are the cream of the crop. No comparisons, just copies.

[@jonhill4580]

any mod 70 old or new has a fantastic safety they are not a "trigger block " safety .maybe some day you could tell your viewers the difference. great video as always

[@hunterstraus843]

"Beautifully simple" is how I'd describe these -- got a 1640 in .30-06 (trying to find one in 6.5x55 now) and its wonderful. Only "deficiency" I'd highlight is that the trigger guard/bottom metal is aluminum (although not on the 640 that you displayed)

[@markdubois3614]

3 guns built so perfect. The magnificent 3 for sure

[@bradleyswasey6778]

I really like the 8mm and that one you have is pretty nice.

[@richardsinger9520]

Collectibility vs Utility. An excellent approach to comparing firearms, Mike. Your enthusiasm for the Mauser 98 actioned rifles led me on a quest. I found a sporterized WWII M98 in an antique store. Still with German markings and matching serial numbers. The stock was beat up but restored nicely. I replaced the plastic Browning butt plate with a period red rubber recoil pad. It shoots and handles marvelously. Thanks for your terrific videos and insights into gun collecting. Have you done an analysis of the Browning Safari? I passed on one a few years ago and now I’m regretting it. Thanks again!

[@UnitedStatesOfGuns]

Hi Richard, I think I did make a video - and there was also a Safari in my "Gun Haul" video - but if I find a Safari - I'll make another video. Thanks for the kind words! Take care.

[@richardsinger9520]

I found the video. Thanks. What a fantastic rifle. I’m putting it on my wish list.

[@davidfriesen9512]

Good evening sir. I’m from Edmonton. I’ve been looking at the Husqvarna 8x57 on the tradeexcanada website and I was wondering whether they built in such a way that the follower wouldn’t stop the bolt if the magazine is empty. Then I saw you cycle the bolt and it answered my question. Thanks

[@dalanwanbdiska6542]

Proud owner of a Centurion 123 30.06. Its the exact same rifle as those 3 rifles . Has a bent bolt handle for scope and driled and tapped from factory also. Im turning it into my dangerous games rifle for up close kills on elk , moose, and bear defense. I need to find a 1x4x32 bushnell post and crosshair . Gotta order some removable rings or see through and zero the iron sights at 25 yards. I got mine for $350.

[@joehart6406]

I enjoy your videos. Im tired of ar ak the latest greatest polymer double stack blahblahblah. These guns are so much more interesting . More fun for more people.

[@3ducs]

Mike, I know you are also a fan of the Zastava/Interarms Mk. X. I have one of their Deluxe Internationals, Mannlicher stock, butterknife bolt handle, double set triggers, .270, came with a Leupold 2.5-8 scope for $550. A nice rifle. I did recently buy a pre-70 in 30-06, $900, a very nice rifle. The Mk. X might have been a $450 rifle without the scope, but it isn't half the pre-70 in quality, it compares quite well. I am happy to have both of them, they are both fine rifles. Your subscribership ought to be WAY over 20,000, you showcase so many interesting firearms in a very nice manner. Take care of yourself and let's get this country going again, time to go back to work! At least that's what this 73 year old man thinks.

[@trapdoorspringfieldmodel1888]

In the United States we can't get back to work until we have enough testing to detect and contain potential outbreaks. Without that any reopening is going be done blind and will likely be devastating.

[@edwardabrams4972]

The Mark X are great rifles and being CRF they make great hunting hunting rifles which I have found out many times over the last 60+ years of collecting

[@bushleague3472]

I do almost all my hunting with 2 Husqvarna Lightweight carbines. One of them is a 30-06 and the other is a .270 win. They are perfect enough that every time I start shopping around for a new rifle, I end up not buying anything, the Husqvarna's give up very little to any rifle currently produced that sells for less than $2000.

[@hristoapostolovski5407]

Here in Sweden the Huskvarna mod 1640 is a extremely good Mauser 98 in cal 6.5×55 ore 308 ore 30.06 , They will last you a lifetime with minimum care , only one problem To put a good scope on them , Many new Swedish hunters buy a well used Huskvarna and then their children inherit it ,

[@Cariboobear]

I agree 100%. I really can't decide which i like better. Truth be told , i think the edge would go to the husqvarna if it had the Winchester wing safety.

[@turtlewolfpack6061]

I love my Pre 64 Model 70, I am third generation owner since she was bought new but I now have my eye on a 96 Model Husqvarna in 9.3x62mm. Can not go wrong with either one.

[@marcogram1216]

Those 96s in 9.3 are the best combo of heavy caliber and carry weight. The 96s are plenty strong enough for the cartridge.

[@josearellano5778]

As usual beautiful rifles‼️ 💓💓💓😍😍😍

[@UnitedStatesOfGuns]

Thanks Jose!

[@northdakotaham1752]

"some people think they are chainsaws"....love it! Thanks for the laugh!

[@magicdaveable]

My Husky Mauser "98" is chambered in 6.5x55 SE. The very best rifle I have ever owned.

[@UnitedStatesOfGuns]

Not easy to find - bravo.

[@jameskennedy6982]

Have a "Husky" Tradewinds, .30-06, like new, extremely accurate, sits in vault gathering dust.

[@jamesparlane9289]

I was at an auction once and started bidding on a Husqvarna the same as your older one there. It was in 30.06 and a good straight, solid undamaged rifle. Another bidder came in quickly and I could see he was determined to have it so I let it go and he got it for $300. If I kept bidding it would have gone through the roof so I let him win it. He may as well get it cheap but I always wish I had bought it. That bidder knew quality then and I was still learning. There will be another one day. Sometimes your stars line up and sometimes not. I picked up another model 37 Winchester single shot 12g. the other day and it is a 'red letter' model in good condition. Lovely gun.

[@UnitedStatesOfGuns]

Hi James - those Winchester 37s are another secret - so well made; and growing in profile. You will get a Husqvarna - they are still around as you know. People have some idea about them and gradually, the brilliance of those rifles is sinking in. All the best and good purchase!

[@hawkeyeinthehouse2995]

Another GREAT INFORMATIVE AND INTERESTING VIDEO. I was at a pawn shop a about 5 years ago and they had a Husqvarna in 30/06 lightweight that had JC Pennys as the retailer, I thought that was pretty COOL. BUT UNFORTUNATELY I wasn't looking for a 30/06 at that time, it was fairly cheap about $350 in VG condition. I probably should have bought it. KEEP up the good work. 😉😃😃😃😃

[@UnitedStatesOfGuns]

Thank you Hawkeye ITH - Those are so fine - and still around and fairly priced. Cheers.