Can't Afford Milwaukee Packout ? Try Husky Connect Rolling Toolbox Storage System From Home Depot.

Can't afford Milwaukee Packout ? Try Husky Connect rolling toolbox storage system from home depot.
I was looking to get a rolling toolbox storage system and couldn't justify spending the money to get into Milwaukees Packout system. Most of my work is done in the shop. I looked for a more economical alternative and found it at Home Depot. The Husky Connect 22 inch system.
In this video I show you the three piece system plus an additional piece I purchased. I show you its features and give you my first impression.
I also go online and show what other options are available for this rolling tool storage system.
Stay tuned until the end of the video. I give thanks to one of my new KZbin subscribers.
Thanks for watching!
Please remember to hammer that like button (thumbs up) and torque that red "subscribe" button.
All opinions and reviews are my own, and I am not being paid by Snap On , Milwaukee Tools or any other tool companies. You will receive an honest opinion from a professional mechanic, with twenty plus years experience who uses the tools daily. Snap on and Milwaukee tools are for use in the transportation industry including: automotive, commercial transport, heavy duty, marine, aviation and railway industries.
***If you enjoyed this video or it was helpful, please remember to hammer that “thumbs up” button. It would be greatly appreciated if you could also press the red “subscribe” button to support my new channel. New videos posted weekly.
In the comments below…also feel free to let me know what you think, or if there are any tools you would like me to review, would like more information on, or any repairs you would like to see.
Please subscribe to:
-Facebook: / shaners.mechaniclive
-Instagram: / shaners.mechanic.life
-KZbin Channel: / @shanersmechaniclife3164
Disclaimer:
Due to the factors beyond the control of “Shaners Mechanic Life,” I cannot guarantee against improper use or unauthorized modifications of this information. “Shaners Mechanic Life” assumes no liability for proper damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. “Shaners Mechanic Life” recommends safe practices when working on vehicles and/or with tools seen or implied in this video. Due to the factors beyond the control of “Shaners Mechanic Life,” no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not "Shaners Mechanic Life."
The information and/or advice given in this video is no replacement for the services and knowledge of a qualified, certified mechanic, when in doubt of what to do seek a qualified professional mechanic in your area.

[@tomprovan50]

totally agree with you on price I have multiple 22 inch cantilever boxes have every thing in one for plumbing, one for electrical,and so on when I grab a box it has everything I need to do the job.

[@shanersmechaniclife3164]

Figuring out the best way to set them up is the hardest part I found. I'm always making changes to try and get more efficient. Thanks for watching and commenting.

[@DrJuan-ev8lu]

Totally in agreement. The basic three piece rolling set plus the two drawer unit and two layer cantilever parts bin is very affordable and holds everything I ever need to roll out with. If I need a two or three foot lift I stand on some of the stack ... Still no breaks. On any packout system you can strap your fav tool bag on top, even non-matching, to get to the work location. Or you can build a tool wall inside one of the boxes. The Husky connect system is a few inches narrower than all other systems so it fits better in cars and PU's with narrow back seats where you can lock it in. IMHO this system is highly under- rated.

[@shanersmechaniclife3164]

I have gotten a lot of use out of my husky set up. The compact size is a big benefit in my opinion. I also have some pack out pieces that I have bought for a service truck set up. Thanks for watching and commenting.

[@recyclespinning9839]

I bought them and used them a few times 👍👍. My Rigid system , super durable, but unstacking them in an apartment made me try the Husky Connect . Unfortunately, on the Rigid , I found out the drawers are too heavy. Husky Connect drawers and canteliver units for the win, who would have thought 🤔. PS, using the cantilever as the top unit allows you to put your drills and a charger inside the bottom if you remove the small trays inside . I put a liner on the bottom, about 3/8 thick for padding, and my drills actually are perfect height to close the canteliver, and they don't move when closed. Love when stuff wirks out that way !

[@shanersmechaniclife3164]

What I like about the Husky Connect is bigger isn't always better. Thanks for the detailed feedback. I like to hear what people think about other brands.

[@21kitkatbar]

You sold me on this by hitting all the points really well and the fact that it has a drawer option was a big one for me. Great job with this video!

[@yuriochoa166]

Tiny drawers tho

[@lovin_richie]

I love the husky set, have the same setup. And helps me at work as a handy man, keep in mind it’s a great starter for someone like me in their 20’s

[@shanersmechaniclife3164]

It has served me well in the time I have had it. No regrets so far. Think I will pick up another bottom unit. I keep rearranging things. Lol

[@fl8548]

I’m actually going to get this system. Been doing a lots of research and for what I will need it for, it will do just fine. I can’t justify spending over $300 for a pack out system. For those who say these break and crack easily, I don’t know about you but I take care of my tools. Always have and always will. This setup may not be for everyone but it sure is for me. Can’t wait to get this.

[@shanersmechaniclife3164]

Mines been holding up well with no issues. Just make sure you keep the parts organizer latched at all times. Dumped mine out twice now getting into another container. Lol

[@fl8548]

@@shanersmechaniclife3164 I bought the organizer and the two drawer box. To add to it. Crazy thing is that the entire Milwaukee pack out “Wall” was completely full all the the Husky Brand system was literally dam near sold out. I think that speaks volume in my opinion. Milwaukee needs to bring down their price honestly. So far I’m happy with this Husky system how it turned out.

[@shanersmechaniclife3164]

@@fl8548 you got the same combo I do. I'm super pleased with it too. Thinking of getting the 26 inch rolling unit. If I'm correct the 22 inch pieces work with it as well. Then I can ditch the Rubbermaid bin.

[@fl8548]

@@shanersmechaniclife3164 yea I think it does. I tried out the 25 gal rolling box since that’s all they had and stacked some on and test drive it down the isle and it was pretty nice.

[@gregorymandile2321]

love mine.not one problem

[@kings17court]

I don't know who started this stackable toolbox system on wheels idea, but what a great idea. Love it. I really like this Husky system, but I also really like the Hart system. They are quite similar --- affordable, functional, and flexible. Add a 2-drawer unit to each, and I would be totally happy with either. Like you, I also like that the Husky is just black. Most other units try to be flashy with bright colors, but I prefer the subtle black and grey.

[@shanersmechaniclife3164]

They are a great idea. I use mine to carry my basic tools and common parts around. Glad I bought it.

[@bryanquick16]

I had The Husky system. my biggest gripe is the clear plastic on top of the organizers break very easily and the clips fall out easily as well. Rest of the boxes are built great. But I ultimately decided to upgrade to the Rigid system.

[@dannyg.781]

I have the original 3 box kit. I love it! I recently just seen the drawer box at HD. Want to add it to my setup as well. Good review!

[@shanersmechaniclife3164]

I've got 2 drawer units now. They are holding up well. I keep reorganizing lol. I appreciate the compliment. Thanks for watching.

[@jandrew93]

It’s all I need for my garage. Just trying to organize my drip irrigation supplies.

[@davidortiz2750]

Hey, just brought the husky 22” connector tool box & it’s great. It’s better than carrying my tools in a backpack. It’s also less weight. Though watching your video i’m gonna invest in the connector draws which is very handy due to my glazier work i do.😉

[@shanersmechaniclife3164]

Since I made the video I've added another drawer and cantilever box. Not all in one stack.

[@struckus]

I have this system..I was all set to get a Milwaukee packout then grabbed ahold of it..that thing weights a ton lol..went with the Husky and it has been awesome..

[@yuriochoa166]

I’m trying pack out for a week or so so far it’s cool but my home customers don’t wanna see a whole ass tank rolling into their homes; maybe good for commercial but not for homes

[@ScoutzMcGyver]

I love mine. Had the original 3 for a few years and expanded with multiple parts. I can't stack them all on the 1 wheel box but i never need to. They are made by keeter. I have several other keeter made items - the collapsible job table is my absolute favorite.

[@ScoutzMcGyver]

Ridgid is also made by keeter - they call it the "professional"

[@recyclespinning9839]

Thanks for the review. I like the portability and drawers . When you are in and out of apartments, jobs , and trucks , you need portability up and down stairs . The ease they come apart, and ease of stacking them and having an instant work station , instead of spread out tools in a customer's home is very important. Looks like the design is good on these , with the exception of possibly better 🛞 wheels.

[@shanersmechaniclife3164]

I like that it is smaller and more maneuverable than the packout stuff. I appreciate your feedback. Thanks for watching and commenting.

[@terrycarr7983]

I had the Ryobi storage system, but after reviewing this on youtube, I went back and purchase the husky system and I love the price, the more you get for less money. I'm going to purchase the draw set that you have! Love it!

[@shanersmechaniclife3164]

I like how the husky is a bit smaller. Makes for easier lifting into vehicles and manuvering. The drawer units are a must have in my opinion. Let me know hownyou like them once you use them a while.

[@iamgermane]

The Ryobi system looks better as multiple contact points help hold it together if can get past the lime green look....

[@redr2]

I have 2 milwaukee cases for all my nuts and bolts. Love it. Its heavy now loaded though

[@shanersmechaniclife3164]

Mines getting up there in weight as well. Wheels are holding up well

[@fernandoagostinelli]

Great video. Thanks!

[@shanersmechaniclife3164]

Glad you liked it. I've got a follow up video in the works now that I've used it for a while.

[@AKH8081]

I have the same setup and it works great 👍

[@shanersmechaniclife3164]

Had mine for a while now. Planning on picking more pieces up.

[@johnnyramirez9082]

Just bought one today. Thank you

[@shanersmechaniclife3164]

What do you think so far? I'm pretty pleased with mine.

[@johnnyramirez9082]

@@shanersmechaniclife3164 I’m impressed with the built quality and a great price point.

[@RES9CUE104]

I use this for my rc cars hobby which it’s perfect for

[@shanersmechaniclife3164]

So many different uses for these smaller setups. Very versatile. Thanks for watching.

[@recyclespinning9839]

All the manufacturers missed the mark. You need access to your tools without unstacking them in the customers home. You make a mess , and you're working off the floor unless you bring in a portable table to set up. The Rigid system at least stacks and unstacks with a simple design, as does Husky. The Milwaukee is BULKY!!!

[@shanersmechaniclife3164]

I've got a couple of the husky drawer units and really like them due to not having to unstack them. I agree the Milwaukee units are bulky. Husky units are just the right size.

[@thomasgimenez5169]

I tried one years ago for my collection of rc cars that I take to hobbytown for indoor racing. It worked good with the steps that I have at my apartment building. But it did not have enough space for a pack rat like me . If I could custom build from the available pieces, I might do it again . Be careful if it tips over backwards, I had the handle break .

[@arnoldramos39]

Nice...very nice

[@shanersmechaniclife3164]

It's a smaller setup but for the price, you can't go wrong. Thanks for watching and commenting.

[@gcoffey223]

Same... I need something and every husky product I ever bought, I still have including a 10 year old bag. I believe I will pick this up Sunday. Best

[@shanersmechaniclife3164]

Husky has some great durable stuff. And you don't pay for the big brand image.

[@gcoffey223]

@shanersmechaniclife3164 Well... after my compared all the ones todY, she wanted to go see the flex. Next thing I know, she signed up for a credit card that we needed anyways and a discount on your first purchase . FLEX Stackpack full set for $215. My bDay is tomorrow so... happy Bday to me!! Super pleased. Thank you and I will keep on watching as you do great work. Best!!

[@gregorymandile2321]

I have the packout,the Dewalt and the Ridgid ones.The Husky setup I left at my Church for when I need tools and stuff when doing God's work,and I really like it so easy too use.The Ridgid 1 is my favorite

[@shanersmechaniclife3164]

I like the husky partly because its smaller than the pack out. If all my work was mobile id probably go pack out.

[@ManlyManStuff]

I wish rigid has drawers! And the handle on the 22" rigid rolling box sucks mines bent :(

[@eddydmesa]

I love this system. I have the stack system and 3 two drawer systems. I kinda made some modifications to mine. I also made a cart for it. I'm looking for more mod ideas for my system. Tho I have quite the setup now.

[@shanersmechaniclife3164]

I picked up another 2 drawer and the cantilever storage pieces. Still working on arranging everything. Everytime I think I've figured it out, I come up with another idea. Lol

[@backhandahooker]

ive had the husky connect system for about a month now. I. have the cantilever box and the drawer box and I am also very impressed with how Stealth they can be, ive gone out fo my way to cover husky logos with electrical tape, and for the price. Its really nice. I wish there was more connect stuff to get into. But I think they have all their bases covered.

[@backhandahooker]

I look forward to your review after you “move in”. Give us that update please!

[@shanersmechaniclife3164]

I was also thinking of painting or sanding over the logos to camouflage it.

[@shanersmechaniclife3164]

@@backhandahooker I will definitely do a video once I come up with my permanent set up. I keep changing it lol.

[@shanersmechaniclife3164]

@fartpoobox ohyeah to black out the white husky logo. That way its pretty much all black and doesn't stand out from a mile away like the Milwaukee ones do. Less chance of a smash and grab in rough parts of town

[@fullray]

very good your youtube channel

[@shanersmechaniclife3164]

Thank you very much. I really enjoy making videos. Are there any videos you think youtube needs more of? I'm always looking for ideas.

[@gregorymandile2321]

I have that set.very nice setup for the money

[@shanersmechaniclife3164]

I just picked up another set of drawers and the cantilever parts storage bin. Your right, cant beat the price.

[@gregorymandile2321]

@@shanersmechaniclife3164 The drawers r pretty sweet, just was looking at them at HD

[@skynethell]

I wish Husky wouldve made handles on the front of each box that way you don't need to unmount each to carry them comfortably. I've found that the Rigid was also a good alternative. They don't have too many add on box options but the ones they do have are very affordable and they have a good weight limit.

[@shanersmechaniclife3164]

I like how they are a little smaller than the Milwaukee. Easier to store and move around.

[@joeyszalkiewicz8052]

Not trying to roll up on the job site and flex my packou like some dudes..I really like the husky stuff and have been using it for years based on the price their weakest link is there latches.. if they can upgrade that it would be a game-changer.

[@shanersmechaniclife3164]

I have the husky and packout systems. Like them both. I get what your talking about. Some people look like Milwaukee salesman when they show up. Thanks for watching and commenting.

[@nldragonslayer369]

What the depth of the one with the drawers like how deep are each drawer

[@Snowmannorth]

Missing the 2nd drawer latch…I just bought one of these as well.

[@shanersmechaniclife3164]

Good eye. It's on order no charge from husky.

[@currbag]

I could afford a packout. I just choose to not spend unnecessary money on something that does the exact same thing the husky does. But at over twice the cost

[@shanersmechaniclife3164]

Spend money on the tools not the box situation. I agree.

[@davidhunter9434]

ll depends, IMHO. I was a pro musician (bassist) for 20+ years before getting into carpentry. I used to watch fellow musicians spend $$$$ on instruments only to carry them in cheap, $30 GuitarCenter bags - much to my amazement, they were always surprised when something on their instruments was damaged or broken between gigs. Lesson: If you travel with your gear, or tools, etc., especially if they are expensive and are critical for your career, then get the proper cases to protect it all. Period. End of story. The extra expense is worth it. If you keep your tools at home, and rarely travel, then the Husky setup looks like a solid option if it meets your needs. Just my thoughts.

[@chingonbass]

@@davidhunter9434 I would take my squire beater basses or the equivalent out for road work. Usually the gig bags I used cost more then my basses. Lol If you know how to set up an axe you can make anything playable and sound good and nobody would know the difference because musicians tend to be kinda retarded. Musos-"hey bro what kinda bass is that?" Me "oh this o'l thing, it's a 1954 fender Pbass made in Albania by Turkish garden gnomes carved out of unicorn tusks. It's strung up by Zues's pubic hairs which enhances my stank" Musos-" woooooooooooow"

[@bobbysnyder3169]

​@davidhunter9434 But, when it comes to carrying tools, the tool box really doesn't matter. Tools are or should be a lot more durable and less delicate than musical instruments. 50% of the people using Milwaukee, Dewalt, etc could do their job worth DIY Ryobi tools. I've literally used my Battery on my Bosch, Makita, Milwaukee drills as a hammer to pound something into place and than throw them into a tool box and head to the next site. I'm not saying treat your tools like I do because I'm really hard on tools. I own a Telco-Data Infrastructure company that bills $125-$185/hr. Than at home we got 300 acres, 125 head of cows. We also have 250 Storage Trailers we rent out, Metal/Welding shop, Paint booth, Carpentry shop. We are Really Really hard on tools at the shop. But I can speak to having a Makita 18v Impact/Drill combo kit that has lasted 5yrs. And I literally beat the crap outta it. My dad always said... you don't buy a Sledge Hammer for Finish Carpentry or a Bush Hog to use as a Finish mower. Lol

[@jessegray1989]

The hart stack system has surpassed this greatly. And the bottom box has a lid/cover

[@shanersmechaniclife3164]

I'll have to take a look at them. Thanks for the info.

[@agfa663]

Your drawer set module is missing a locking tab on the left. That comes with two tabs, not just one.

[@shanersmechaniclife3164]

Good eye. I took that back to home depot and they warrantied it no questions asked.

[@Andrew_Sherman]

I have the ridgid system and have been thinking of expanding to add the husky. Most people might think - why do you need so much? Well as a landlord, who does a lot myself, it makes it simple to separate tools by repair type so you only grab the boxes necessary. If I’m gonna work on a plumbing job, it doesn’t make sense to have my snake with my circular saw. And I don’t have nor do I want a full tool truck, I just want to run to my storage unit, pick up my labeled boxes and go….

[@shanersmechaniclife3164]

That's a great way to do things. Keeping organized saves so much time. That extra money you spent will pay for itself in no time. So many people don't think of their time as money. I'm thinking of getting another husky base unit.

[@Andrew_Sherman]

@@shanersmechaniclife3164 oh man I’ll be honest, it took about 6 months of occasionally forgetting tools when some properties are 40 minutes away for me to finally admit it. I’m not even finished and still have a long way to go (only have 11 units), but other landlords I know have been commenting on the idea of having the grab and go kits and separating by type. (Even if it means certain tools you may decide it’s worth buying two of - typically common hand tools and such)

[@shawnevans26]

The bottom having no lid is a no for me! I only would buy the bottom so it has to have a lid.

[@QuangNguyen-pk4op]

What’s the interior dimension of the bottom ?

[@thereaper7340]

Hi great video, I'm thinking about picking this up for work but I would like to leave it there. Is it possible to lock this with a padlock so someone cant steal the contents?

[@shanersmechaniclife3164]

Thank you for the feedback. No you cannot padlock it. Unfortunately there is not much you can do anti-theft wise with these portable toolboxes, short of taking them with you.

[@joeycomte4736]

Yes it is possible to place a metal wire and lock it

[@krisgee9553]

How's this holding up 4 months in? I'm trying to get organized and this is more like my budget! Thanks for the review.

[@shanersmechaniclife3164]

Glad you found the video useful. I have now had it for five months, and no complaints. I use it often. And there is an update video coming soon, subscribe if you haven't already so you get the notification it is up. Did you end up buying one?

[@jakobwithak930]

I got myself one and I love it for the price is at. Only thing is that I don't see a way to keep all of them locked together in case I end up forgetting it or leaving it behind😮

[@shanersmechaniclife3164]

They are very good units for what they cost. Have you dumped the top tray while opening the 2nd stage? I did now I always make sure it's latched. Lol

[@jakobwithak930]

@@shanersmechaniclife3164 yes but just more so because there's been plenty of time my tools get stolen at jobsites I was just wanting their to be a way to lock each box with each other so they can't just unlatch them and take them if that makes sense. I'll probably end up modding it into it

[@gebronthomasson6960]

How is the flexion of the boxes?Are they pretty rigid? And thoughts after having them after some time..thanks for the video

[@shanersmechaniclife3164]

So far so good. The only thing that has flex is the handle on the bottom unit when it's extended. Nothing has broken on me. Glad you liked the video!

[@bulldogfit1584]

Can the handle be removed from the bottom case? I need it to be able to fit under my truck bed cover without having to lay it down. Thanks

[@shanersmechaniclife3164]

Yes the handle can be removed. Very easy. Just 2 screws and pull handle assembly out.

[@EP1CNELSON]

i was going to buy this but i just didn't like how the bottom box doesn't have a top so i bought the rigid. I just wish rigid had a little more modularity

[@shanersmechaniclife3164]

I've found it handy a couple times. Using just the bottom with some awkward sized parts.

[@walterhoffman5269]

Harbor freights Bauer brand has a very similar one. Not sure how they compare head to head but yah

[@shanersmechaniclife3164]

I don't have a habour freight near me I'd like to compare them. Are they available online? Thanks for watching and commenting.

[@UltimateCARNUT]

50 dollar husky drawers easily best deal on the market

[@shanersmechaniclife3164]

I agree. I'm thinking of picking up another set or two. Can use them anywhere

[@Nogardthegreat]

All the comments here and no one mentioned the left clasp for the drawer is missing from what looks like brand new double doors? Was it removed by you or you just didn't notice it when buying?

[@shanersmechaniclife3164]

Lol good eye. It was missing when I got it. It was returned for a unit with two.

[@scottschwenk9570]

I looked at this at H D I don't think it is waterproof but I'm not sure the new ridget system looked better only a few dollars more but they didn't have very many boxes husky had Lott's of them ended up getting the ridget .

[@shanersmechaniclife3164]

The husky boxes have served me well so far. I find the drawer units very useful. Thanks for watching and commenting.

[@fullray]

Where can I buy the additional piece, does it have a link to buy it, because I can't find it online?

[@shanersmechaniclife3164]

As far as I know, home depot is the only place to get them.

[@TheMrclifford23]

👍🏾

[@agfa663]

I just bought 3 sets at 51$ CAN. Drawer set were 23$ CAN and organizer were 10$ CAN. There was a price advertizing error and I bought it at the right timing.

[@shanersmechaniclife3164]

Can't Afford not to buy them at that price. Great timing!

[@agfa663]

I bought two carts plus 8 aditional modules. I find that the more module you have the more confusing it became. I have to open many drawers ti find my tools as all modules look alike. I will use my P-TOUCH labeler and identify the drawers and boxes content.

[@patdud1979]

Did you get it new?? And was it on sale??

[@agfa663]

@@patdud1979 I got it new. It was not on sale it was a price error. The error occured when selecting a specific store for viewing the item. It happened to be the store in my area; this is how I found this error. Therefore I ordered 2 at 51$ and many other trays at 10$ and drawer sets at 23$ each. I told it to my frinds and family members. So all and all, family and friends ordered about a dozen before HD found-out the errror and fixed the price. That was last September 2022.

[@patdud1979]

@@agfa663 wow nice find glad you got that great deal 🤙

[@geraldf.1222]

GREAT STUFF, PROB MADE BY THE GENIUSES IN ISRAEL. I HAVE A COLLAPSABLE WORK TABLE, MADE THERE. ANOTHER GREAT PRODUCT.

[@shanersmechaniclife3164]

Collapsable work table? What brand? Husky? I'm interested.

[@Hidyman]

4:00 I'm assuming those are inner dimensions.

[@shanersmechaniclife3164]

Actually no. Those are over all.

[@rick7414]

Can you lock each section?

[@shanersmechaniclife3164]

Just the center section has a spot to put a padlock on.

[@rpals5412]

Anyone from Europe who can recommend similar system sold in within the EU ? Please 🙏🙏

[@micahmalapit2355]

Is it possible to orderthe drawer box?

[@shanersmechaniclife3164]

Yes I bought the 2 drawer box separately. It's not expensive

[@jonathanwilliams2217]

You’re drawer system appears to missing the left latch

[@shanersmechaniclife3164]

Yes. Good eye. Took it back to Home Depot. No problem getting warranty.

[@stephenstewart7972]

After using this, what do you think of Husky’s new Build Out system?

[@shanersmechaniclife3164]

I haven't gotten a chance to try it.. yet. When I do, I will be sure to make a video. Thanks for watching and commenting.

[@got2getit204]

Was that a shot at Milwaukee?? Is this Jody the one who’s scared to get Milwaukee packout because it’s to red and will get stolen!

[@shanersmechaniclife3164]

No I'm a Milwaukee guy. Not Jody. I do some work in high crime areas. The dark color helps to not draw attention.

[@nathangallup1]

D Mhl

[@Tiersmoke92555]

Where's that update video boss?

[@shanersmechaniclife3164]

I haven't gotten to making it yet. Thanks for the reminder. I'll get on it. It is holding up well

[@mariosanosan]

Those Husky boxes are made by keter

[@shanersmechaniclife3164]

I looked Keter up and they look very familiar.

[@Azntrutek2012]

2 negative point about husky connect system are rain prove and metal latches very flimsy.

[@shanersmechaniclife3164]

Your right. They aren't very water tight. I haven't had any latch issues except for the one that was missing when I bought the drawer unit. Thanks for watching and commenting.

[@TJB1510]

WHAT DID YOU PAY FOR THAT SYSTEM?

[@santososoriovicente6530]

I like Milwaukee bad too expensive🤦‍♂️

[@shanersmechaniclife3164]

Milwaukee is a fair bit larger. Unless I really need something I don't buy at full price. I always watch sales and even used online stuff.

[@KallenSC]

The best thing is both are made by Keter - There is no such a thing like "husky" system....That is Keter Connect System. Same there is NO Rigid, or Hart ... There is Milwaukee Packout made by Keter, just for MIlwaukee, Dewalt Tough 2.0 made by Keter for Dewalt Only, Tstak Dewalt/Stanley made by Keter and Ryobi Link.....Ridgid is Keter gear system, Hart is Keter Stack and Roll system, Husky is Keter Connect system....they are just copies!

[@shanersmechaniclife3164]

Seems like not many companies do their own manufacturing. They just get companies like Keter to do a run with their " Milwaukee parameters" probably more cost effective in the long run.

[@adelmurza777]

I got it today, Husky cheep but good quality for that money🤙

[@shanersmechaniclife3164]

In my opinion it's best bang for your buck for portable storage.

[@bert1913]

I bought the husky system. i ordered an extra second stage box. plus an open 20" toolbox, I keep all of my plumbing tools in these

[@shanersmechaniclife3164]

How do you like them so far? I'm very pleased with mine. I picked up the cantilever box and another drawer unit.

[@bert1913]

@@shanersmechaniclife3164 I love mine. you can't beat it for the price