Can We Beat The 45,000 RPM Skateboard Wheel Record?

Can we beat the record of spinning a skateboard wheel at 45,000? Only one way to find out.
We used our 60,000 PSI waterjet to spin a skateboard wheel at 45,000 RPM and it ended in many explosions because we also used a roller skate wheel and some fiberglass reinforcements.
Christian’s video: • I Split My Lawn Mower ...
🔪🔪 waterjetknives.com 🗡️🗡️
Are you or anyone you know going through a divorce? If so, i'm sorry to hear about it, but we'd love to help divide the assets.
Music: / @ludandschlattsmusical...
Don’t steal our videos, if you’d like to use our video for something please contact us via email.

[@meccanoman]

Thanks for inviting me to the shop guys, I had a blast! Excellent video.

[@tracybowling1156]

I cannot believe you were brave enough to hold on to that meter like you did for that whole time. You were awfully close. 😳🤯

[@serpico1616]

It's fine, hands grow back

[@Yourtoxicity]

Brave is not the word I'd use 😵

[@ttuurrttlle]

Yeah, I mean not even gloves...

[@tracybowling1156]

@@serpico1616 ha! Too funny! 🤣😆😂

[@ordianry26]

Theres a fine line between bravey and stupidity and theyre constantly zig zagging across that line..

[@brandonferrell828]

Proof that dan really brings life to the channel. What a guy.

[@RepublicanDemocrat]

I just don’t see it as a channel that’s living anymore. These new guys don’t have any comedy or anything interesting. They are just redoing what the old guys already did but without any soul.

[@hardboiledtoast6086]

What happened to dan and mitch?

[@CreamyPennePasta]

Where did Dan and Mitch go

[@SiloKybe]

Dude holding that tachometer with an unguarded hand like that is EXTREMELY dangerous! If that wheel would have launched into your finger or hand, that would slice straight through it

[@gaberocco1]

Still waiting on an explanation vid about where the bros went. We like you, just dont keep us in the dark. We dont want this unique channel to die.

[@nuclearduck13]

Dan and Mitchell don't work at the shop any more, confirmed by speaking to the shop personally. Why they don't work any more, idk but that's kinda personal imo

[@750jason]

You can find them at Cars&stuff channel

[@DannyDeVitois79]

(Psssst. There’s a million subscribers…. I think they’re okay)

[@reaper621993]

@@DannyDeVitois79 a million subs with only 42k views on a 2 day old video

[@dallasfreeman3417]

@@reaper621993 plus only 1.5k likes in 3 days

[@jasondelgado52]

I really think you guys could check the speed more safely. That’s nuts having a hand that close.

[@bigbonede6201]

Was thinking the same thing. Good way to lose a few fingers

[@pickleofdeath7740]

Greatness requires sacrifice 🫡🫡😂

[@itac0i]

So lucky they still have that hand lol

[@MusakiSan]

buy them a better guage that doesnt need the button held down for.

[@MusakiSan]

or with a longer range.

[@RandomBogey]

Didn’t expect Nate to make an appearance. Little disappointed he didn’t say much. He seems kind of board, though

[@bigfan6016]

😆

[@RepublicanDemocrat]

Not gonna lie there’s no humor or flavor since the channel got changed. They killed a beautiful thing

[@thomasgyting3251]

In order to do that without a waterjet you'd need to be skateboarding at around 400 miles an hour.

[@VeraTR909]

/r/theydidthemath

[@UncleSpuddy]

Imagine the road rash from falling off

[@shannonduckmanton243]

@@UncleSpuddy you'd probably disintegrate entirely lmao

[@zezzy3]

Idk about 400 mph considering the diameter of the lager wheels but Danny Way holds the land speed record on a skateboard and distance record as well as the hight record and he got the gap distance record with a broken ankle from his first attempt lol

[@Freddy_.910]

Or u could use a air compressor

[@Northerncalwolf]

You guys should use a jet of compressed air ( 50 to 75 p.s.i.) aimed at the *target* you are filming. It will help get clearer video images by blowing away the water vapor / mist from the cutting and relative shenanagan-ary that's going on in these videos.

[@ExpendableOne23]

I'm amazed you didn't use a cutoff of wood and a clamp to hold the tach instead of risking your hand.

[@josh4331]

Think you guys should try to stick something in the expanded hole before it explodes

[@guitarplayer873]

So what do those other guys do now? Retired on a tropical beach?

[@spanglerthings5585]

Need them back

[@xXBIGBADPOPSXx]

What happened to the original

[@SillyGoose69]

The old OG‘s retired and the two stepped up and are now the bosses they no longer do the videos these two do.

[@CzarYe]

@@SillyGoose69 no they didnt retire, they have another channel....

[@CzarYe]

@@Nitrxgen kinda hard to be slurred and monotonous.

[@ArcticBuzzard44]

Ggs my dudes 👊👌love popping on here and seeing the random stuff y’all do 😂 There is a slight problem with the angle that you hit the wheel, if somehow to time it right to slightly back away from the wheel as it’s revving up. Right now it looks as though the jet hits too hard and digs instead of assisting with spin. Anyway keep up the shenanigans🎉

[@HiThere-bu2fg]

You guys should figure out how to machine a skateboard wheel out of metal that is the same size and can still take the same bearings and see how fast you can spin it since it’s not going to explode as easily

[@mikeypal6384]

Definitely use the handheld tachometer for that video too, I bet you’ll beat your record easy.

[@fullyloadedwp]

To achieve a higher RPM you need to adjust the flow nozzle to move as the wheel grows or else it starts to cut into the wheel and causes weakness in the structure of the wheel then blows up.

[@mikalarrington8112]

This is the reply that is needed to explain why they will never get a definitive answer

[@zezzy3]

A progressive pressure adjustment, the hard part there is the energy/heat created would build too fast so they go fast

[@camperkiller3]

Anyone else hear the *_shake hands with danger_* guitar riff whenever he was holding that tachometer?

[@Caysonator007]

This was a lot more entertaining than I expected

[@ironwillACNH]

9:14 have a glass of Waltah You need to stay Heisendrated

[@Toxikyle1]

I feel like high pressure air would do a better job of getting it higher rpm without ruining the integrity of the wheel by cutting into it.

[@ZeroDrizzy]

Love this channel

[@dimitar4y]

Someone needs to do the math on how many joules(/watts) of power there's stuffed in that wheel before it kablowey.

[@jurjenbos228]

And imagine a wheel with that kinetic energy flying through your workshop

[@dimitar4y]

@@jurjenbos228 literal spinbullets.

[@ToxiChaos]

It's sad that Mitchell finally died from all the lick tests and that Dan got transformed into a mannequin, but these other guys (idk what your names are I'm sorry) are pretty good too

[@luvz2reed]

I feel like the phone screen I'm watching this on isn't enough to protect me.

[@benbixel3252]

Maybe no abrasive in water would last longer and increase time/speed. Also feed across wheel. A great fun thing to try .

[@PhamVans]

That's insane man.

[@keny6417]

So cool Ludwig’s music getting put to use. I’ve heard it on some recent vids and was wondering if it was his.

[@easyybreezeyy]

Cool video!

[@yukko_yoshida]

I still can’t believe something so solid feeling is mechanical as soft as a rubber band crazy too see this working

[@kennywasfound5004]

Dud this the coolest thing i ever seen

[@BeardDaddyGrimm]

Winston the water jet because he never gives up, never surrenders 😂

[@quickXkid]

We need a collab with slo mo guys! Your high speed isn’t high enough.

[@giorgiomalvone8956]

You should heat the wheels up first and they will probably stretch more. Soak in boiling water ?

[@spooncrease]

I'd imagine the volume of water and the air it drags with it would cool the wheels before it has a chance to stretch more!

[@richtomlinson7090]

If that waterjet is anything like ours at work, the water is coming out at approximately mach two. Don't lose an eye with that crap flying around.

[@drake52]

the waterjet should be named Walter the water jet.

[@strangehappenings8961]

Stripe a white matte paint on each wheel next time, your stickers would fall off early, most speed readings were not accurate because of it.

[@oliverchumleyjohnson7070]

Bro!! Get your hand out of there!! 😂😂😂

[@spokehedz]

Everytime I see the googley eyes, I think that "they have to have some spare air of like 1-2psi, so they could cut a hole in the clear plastic, and make the eyes spin around..."

[@gnarmarmilla]

Dude, that was really cool…but seriously man, be more careful how you expose your hand yeah? That piece of polyurethane could have probably shattered the bones in your hand if it flew off and hit your finger as you held that device. Maybe could have broken the device too…150 bucks? Very cool footage man. You used very cheap bearings, as a skateboarder I know that Bones Swiss bearings are phenomenal, they will surely spin a lot faster if you guys ever do this again. Thanks for sharing

[@itskaptainmikey4399]

This deserves a colab with the slow mo guys

[@nanaki-seto]

It looked like the last 1 was skipping on the water before it bumped 1 of the metal support fins and took off LOL

[@sicnarf20002000]

Maybe try one with a notch out of the board to allow more wheel stretch? Looked like the green rubber wheel only failed so soon because of the friction with the board

[@DeyTookOurJobs]

That camera mounting system is legit 👌

[@planecrazy2]

Good stuff. Next improvement would be to get the board out of the way so the wheel can grow and not touch anything! More entertainment to be had here for sure.

[@marclawrence715]

So.. have Stan and Kyle officially been replaced by Cartman and Kenny?

[@lokkie67theshed82]

New name for the waterjet, Spritzer

[@fadedgalaxy88]

I haven't watched these guys in a while but what happened to the previous guys that used to run the channel??

[@070fishing4]

I still down know how this channel doesn’t have more than a million subs

[@WaterjetChannel]

We'll be there soon enough 😏

[@UNGODLY_BONAH]

You guys should try this with yo-yo’s that have ball bearings in them .

[@mdes0819]

fun fact skate board wheels at 45 000 rpm assuming maximum grip would produce a speed of roughly 500 km/h

[@francoislebois]

Dude what a shoutout, I need that😂😂

[@jaxenhoare9023]

Definitely should be named Wendy!!🤘

[@MrKarlGP]

Wendy Waterjet, such a trouper:)

[@crazyivan030983]

This one that didn't explode.. you could build some cars with custom wheels, build some ramp, spin those wheels very fast, and test how far or fast they would go :)

[@sethjones5250]

If those are 55 mm wheels, then, 45000rpm is roughly equivalent to how fast the wheels spin on a skateboard traveling 289mph

[@That_RCTeen]

I love u guys❤❤❤

[@crazyliclay]

How have y'all not had the slomo guys on yet??

[@DanielWillems1995]

Design a steel wheel with grooves to catch the waterjet a bit. See how fast you can spin that with just water. With a good bearing, you could achieve outrageous rpm.

[@47RoninGaming]

Don't remember what it's called but what is the word for the "force" created by the spin making it stretch?

[@StupidRobotFightingLeague]

My name suggestion: Leyton Dowman The Water Jet. (Catchy)

[@Kids_Scissors]

Winnefret the Water Jet Starts with a W AND it rhymes

[@davidblanck4131]

Looks like the tape for the tachometer comes off way before maximum speed is achieved. Would a line of silver or reflective paint stick to a wheel?

[@llearch]

Given how the surface of those wheels are stretching? I suspect not. :-/ It's a tricky problem.

[@cobi1kenobi]

as a skateboarder we prefer plastic trucks because they're lighter, and plastic bearings if you can get your hands on those

[@OnaSic1_2021]

Wyman, Wyman the waterjet, cuz that's the sound it makes....

[@jasondadudetoo4176]

I want to see you do this with expensive high speed racing longboard wheels

[@Astrohhh]

I enjoy eating potato salad in my spare time

[@samwpatterson]

Looks like the fiberglass helps you get it up to speed without cutting through the wheel. Might just consider it sacrificial

[@UnjustifiedRecs]

You guys need to collab this with the slow Mo guys

[@stopatredlights]

Big Wally the water jet

[@BlackWolf42-]

Varaflex live on!

[@RifleReport]

I see you are following Brandon Herrera’s approved safety standards. By crouching next to danger.

[@PoschSpice30]

You guys should collab with Braille and/or Andy Schrock and revive. Also try the Bones Dragon formula wheels. Supposedly the best of the besy

[@stormyshaker3883]

what about "flow-rian" as in florian for the jet? or flowrentina idk im bad with names

[@towaxien6026]

bro spun so fast that it expanded

[@PopLadd]

9:16 Pulchwater Jameson. The name has to be said in its entirety, no abbreviations.

[@aaronscrewface]

5:25 It was called meccano in Canada as well

[@jacobc2378]

Call it Wally, the water jet. It’s short for Walrus, the water jet.

[@Mirtguitar]

Dude, mecano was sold in Spain still on the 90's. And i dont whatch tv now, but i think they may still selling them.

[@MykeHunts]

Walter the water jet has a nice ring to it lol

[@ianfarquharson3772]

Your so lucky that last wheel didn't touch (N rip to shreds😖) .Was a great video. I'd try metal trucks fixed to timber high enough so the expanding wheel won't touch,and really stretch them babies out.ThankQ.TkEZ>UK

[@zezzy3]

You should be using some bones Swiss ceramic bearings with some bones stf or any of F series wheels as they have the most durable and fastest bearings and wheels hands down.

[@laurahaaima1436]

You need special bearings!

[@kevinmeeks9049]

BRO THAT WAS SPINNING SO FAST HOW DID IT NOT HIT YOUR HAND JUST NOW?!?!?!?!

[@detritus10001]

Winnefred. Welsh, meaning Blessed Peacemaking. Perfect name for the jet. Or if you want to go with another letter, you'd have to call it Joan Jett.

[@CzarYe]

I went through every single one of the people who commented on here's channels. Many of them were entertaining as all hell.

[@jazzabighits4473]

If it can survive up to 45 000 rpm, say 40 000 rpm, how fast would the skateboard have to be moving/travelling to spin the wheels that fast?

[@guacam4ya103]

Try powell Peralta g-slides, they have a hard plastic inner core

[@erniebray364]

Ever since Dan and Mitchell left the quality of the videos suck really miss those two

[@pman8312]

In ballistic jell why not put some red food color with water in it.

[@lollipop8319]

What happened to the two original guys of the channel ?

[@psychosis7325]

Flowie Mc Splashy Face!

[@fengq7394]

You should try to get a collab with the slow mo guys.

[@genuinejustin6269]

Wilma the water jet.

[@MrSacredcrusader]

For anyone wondering dan and mitchell are over running the channel cars&stuff

[@alohafruge]

Might wanna rig something to keep the wheels from running off like the last one did. I'm sure that if it stayed in place it could have beat your goal rpm

[@Uleyra]

Yall ever notice the wheels hit the skateboard before they get much bigger? Cut a slot in the board and watch how much bigger and faster they get

[@jury-riggeddiesel3505]

Wick-ma water jet

[@Skeez002]

Make a little fixture to hold your rpm Lazer, before ya loose a digit.

[@alanjoesph1538]

When you literally have to find a wheel that expands big enough to have a higher rpm and be strong enough to hold it

[@Selmarya]

Warren the water jet

[@southernmama9362]

Wilma the water jet