Can We Figure Out Why Our SIERRA STOPPED RUNNING?!

  Рет қаралды 12,495

Baxenden Car Breakers

Baxenden Car Breakers

Күн бұрын

Пікірлер: 121
@BCB
@BCB 2 ай бұрын
Just so everyone knows this content is not recorded recently it’s around 6 months old we have read all the comments from the previous videos and taken a lot on board especially about the cam belt and timing issue 😂 we will show more in the future might have to keep the sierra footage as a separate extra series !
@customharleysuk3500
@customharleysuk3500 2 ай бұрын
@@BCB have you had the head rebuilt ? Weir street machine shop is the place to go in Blackburn if it needs a skim and any other machining, might be worth getting a big set of cams and valves if your going full send on her. 👍
@EvilGeniusHD
@EvilGeniusHD 2 ай бұрын
I'm glad you said this, I've been confused since the beginning when you said it had been in storage for years and I was thinking "I swear I've seen that car already" :D Looking forward to seeing the Seirra complete.
@MadMurdock69
@MadMurdock69 2 ай бұрын
It's quite clear the timing is out as there's no compression.. Get a decent fitter on it not one with very little knowledge...
@martinmagee1711
@martinmagee1711 2 ай бұрын
@@BCB 🚐🚐 10 📼📹 yes now 🖥️ 🛒🛒🛒🚜⛏️⛏️👙🩱🥻🚚🚛👷🏻‍♂️🚧🏗️🚚🚚🚛🚗🚗🚗🚗🚨🚨🚨🚨 yes now 📹 10 📼 🚨🚨🚨🚨🚨🚨🚙🚙🚙☎️☎️
@martinmagee1711
@martinmagee1711 Ай бұрын
@@BCB 🛒🛒⚒️⛏️💰🚜🚜📼🦺🚧🦺🦺🚧 yes now 🖥️ yes now
@peterrimmington7100
@peterrimmington7100 2 ай бұрын
Who thinks mr Astley wishes he hadn't got involved, he hasn't got a scooby.
@SimonHarvey-i4z
@SimonHarvey-i4z 2 ай бұрын
SPOT ON M8 if you watch the video wen they drag it out of the container he says easy that have it running in no time 😂😂😂
@Not-Today-Pal
@Not-Today-Pal Ай бұрын
@@SimonHarvey-i4z😂😂😂
@waynehammerton5698
@waynehammerton5698 2 ай бұрын
Really enjoying the Sierra project fellas keep them coming
@raymondrobertson3869
@raymondrobertson3869 2 ай бұрын
I prefer the scrapyard side of things. Just saying😊
@SusanClarkson-kg8ur
@SusanClarkson-kg8ur 2 ай бұрын
Prefer the scrap side with all the lads. 😮
@customharleysuk3500
@customharleysuk3500 2 ай бұрын
Cambelt slipped and bent an intake valve, that’s why it’s pushing flames out the combustion chamber and out the intake.
@wendyenglish1283
@wendyenglish1283 2 ай бұрын
Big shout out to bodger and badger, another great video.
@carolynhollingworth4082
@carolynhollingworth4082 2 ай бұрын
Youll get there get Marcus on the case.xx
@jimmyquinn9639
@jimmyquinn9639 2 ай бұрын
Another good video lads 👏👏👏👏👍👍👍👍👍🚘🚙🚗
@chriss2761
@chriss2761 2 ай бұрын
Another great video lads always good to the see the yard videos and videos like this I like the mixture 👍
@BCB
@BCB 2 ай бұрын
Thank you 🙏
@KevinJones-ye3vw
@KevinJones-ye3vw 2 ай бұрын
James get in touch with Burton Power . They will help , and supply anything to do with sorting old Ford mods . Seriously they are the people you need to speak to .
@SimonHarvey-i4z
@SimonHarvey-i4z 2 ай бұрын
BURTON POWER and the daddies of Ford not cheap though
@garysides636
@garysides636 2 ай бұрын
*Hi Baxenden team* 👋😊 I'm loving the Cossie rebirth ! Takes me back to when you could work on *engines, gearboxes ....brakes with a few tools and no coding* ! *Sunday tinkering* was a male pastime with bonnets up on most drives ....I used to change my oil every *3000 miles* .... Keep up the great work and with all things in life you put the effort in , tackle things methodically and boom 💥 *She'll be running lovely* Q. *You got a name for the car yet* ? Be safe , Gary Sulek 🙏🦉
@BCB
@BCB 2 ай бұрын
Thanks Gary! We don’t have a name yet 😆
@matthewrichardwitts8651
@matthewrichardwitts8651 2 ай бұрын
Cam belt snapped there is no compression boys
@keithGovan
@keithGovan 2 ай бұрын
Resurrection 🤝
@adystarkie
@adystarkie 2 ай бұрын
Get a cozzy lump in it , or a pinto 205 block on twin 40s 😂, might be a good idea to make a separate channel for this , as the vibe isn't too strong
@T0mmy_Tucka
@T0mmy_Tucka 2 ай бұрын
You sure this guy knows what he’s doing? 😅
@mrb8438
@mrb8438 2 ай бұрын
Everyone screaming it's the timing and you all keep saying it's impossible to be the timing hahaha frustration 😂😂😂😂
@turbonick1979
@turbonick1979 2 ай бұрын
Bent valve if you read comments, do a compression test will telll ya
@markburns8469
@markburns8469 2 ай бұрын
Need dancing Pete and Kenny on job this guy hasn't got a scooby
@peterelliott2882
@peterelliott2882 2 ай бұрын
looking good should of got marcus on the team he got some right sheds too run even when they had been standing in the elements ,but keep up good work guys looking forward too the cozy running heeeeee
@Beetroot-1
@Beetroot-1 2 ай бұрын
When I first saw this thumbnail, for a split second I thought you had a crate of beers in your hands!
@BCB
@BCB 2 ай бұрын
Wish they was hahaha
@DragonSpawn4Twenty
@DragonSpawn4Twenty 2 ай бұрын
If you had the Focus ST(why not an RS?), why didn't take the wiring loom, ecu, fuel pump, everything off??
@turbonick1979
@turbonick1979 2 ай бұрын
There’s no compression can’t you hear it
@MOTORSPORT401
@MOTORSPORT401 2 ай бұрын
the cambelt has slipped or come off , remove the cam belt cover and check timing , I can tell by the sound of it cranking
@herculesstudioltd
@herculesstudioltd 2 ай бұрын
Bit of advance when working on someones car the person who owns it tell them to sod of so you can get some work done
@davemansell9329
@davemansell9329 2 ай бұрын
Hi guys that has slipped a tooth on the timing, first and easy check take timing belt cover off and make sure the timing marks line up you know it was ok then stopped now has a typical sound of the timing out 😡come one easy first check timing could be something else that caused it to slip but must check it first
@Shera_1977
@Shera_1977 2 ай бұрын
Just watched 2half Where all them intake valves closed ?n they shud be clean its port injection so fuels always cleaning them
@markmawson1
@markmawson1 2 ай бұрын
Just because it started and ran doesn't mean the timing is right not after the way it stopped, your first port of call should be checking the timing especially the way it's back firing and the sound it's making when being turned over, sounds like compression is low now.
@lewiselliott7562
@lewiselliott7562 2 ай бұрын
Three Tonne is worth his weight in gold can do everything
@Billiampiper
@Billiampiper 2 ай бұрын
@@lewiselliott7562 he ain't worth his weight in manure
@mickwilson6852
@mickwilson6852 2 ай бұрын
Great video lads
@walshpaul4158
@walshpaul4158 2 ай бұрын
Cracking video guys
@kevingallazzi8573
@kevingallazzi8573 2 ай бұрын
Timings a mile out.
@Stevesmods
@Stevesmods 2 ай бұрын
on that start up on last video the valves hit pistons its knackerd , sorry to say
@alanreeves459
@alanreeves459 2 ай бұрын
A lot of haters for these videos but you have to keep trying different content. Keep up the good work 👍
@Benny.metal24hr.recovery
@Benny.metal24hr.recovery 2 ай бұрын
James you made me laugh at 18:27 of the video checking to see if your hands was dirty and because they was not you started touching the dirty bits of the engine lol I know this video made not be everyone cup of tea but I bet it hard to record all the time when they are busy keep up the good work lads
@sirRoyM
@sirRoyM 2 ай бұрын
Stick to what you know and you are extremely skilled at, vehicle dismantling! When attempting vehicle repair, you haven't got a clue.
@gillysdiecastscrapyard4520
@gillysdiecastscrapyard4520 2 ай бұрын
If only there was a scrapyard near you could push it into
@ashleycooper9524
@ashleycooper9524 2 ай бұрын
Jumped a tooth on the timing belt !!
@samwilkins6336
@samwilkins6336 2 ай бұрын
Honesty guys this man has no clue what he's doing. Soo painful to watch.. That thing isn't driving anywhere next week. It'll need a head rebuild or head replacement or a new engine that's definitely jumped timing And bent intake valves. Hence the lack of compression and coughing back.
@richarddent5537
@richarddent5537 2 ай бұрын
No compression it’s not rocket science?
@steviek5138
@steviek5138 2 ай бұрын
Love the car and the journey…just struggling …not sure if it’s the editing…just seems very repetitive talking wise and not a lot of actually doing stuff, that was 25 mins of swapping a manifold…maybe it’s me😂
@ColinLennard
@ColinLennard 2 ай бұрын
While there are bits of interest, I do prefer your normal daily banter. Unfortunately you can't please us all.
@carmadham
@carmadham 2 ай бұрын
I always look forward to your videos in the yard and the banter etc. This Sierra stuff is boring in comparison
@Geemisman
@Geemisman 2 ай бұрын
How many episodes left ? Not my cup of tea
@jaj4155
@jaj4155 2 ай бұрын
Just get someone proper on the job it will be fixed same-day instead of assing about he is clearly no mechanic
@Shera_1977
@Shera_1977 2 ай бұрын
Did run briefly but won't run again until u fix that cam belt n time it up right.getn a bit ahead of yourself with parts when should be checking compression etc 1st make sure the engines worth keeping in it
@shaun30-3-mg9zs
@shaun30-3-mg9zs 2 ай бұрын
Hi James, John, Nathan, Still busy on the Sierra. Sounds like the timing is off. Hope its going to be a simple fix for you, keep up the good work the Sierra, catch you soon take care BCB
@petergrinnell2500
@petergrinnell2500 2 ай бұрын
I'm sure that cambelt snapped or it slipped as it was running then a horrible sound and now it's turning over to fast so the bottom end is spinning but the camshafts are not turning that engine could be nackered if the pistons could of hit the valves John should know this as he ment to be a mechanic he should of checked the cambelt before he started it 🤬 sake take the cover off the timeing belt and look as your waisting your time with anything else as like I said that engine could be fucked now I bet I'm not the only person saying this in the comments
@joenewman6939
@joenewman6939 2 ай бұрын
What the hell is rattling on that camera don't you watch your own videos to make sure everything is ok James no raise for your camera guy not sure who it is
@nobby91010
@nobby91010 2 ай бұрын
Sierra's are a poor mans robin relient heaps of trouble and sheet to drive/it doesnt make any sense your ceo Kenny allowed you to play with such piles of sheet in opening hours must be costing kenny a fortune
@mattstewart3298
@mattstewart3298 2 ай бұрын
where the new digger you bought ?
@ragnarl9130
@ragnarl9130 2 ай бұрын
That's just a frankenstein ball of shite,,, no timing check,,, oh dear lads,,,
@SimonHarvey-i4z
@SimonHarvey-i4z 2 ай бұрын
This is obs old footage as you said new that b4 I read comments I think you should let lil MARKY BOY get involved in this one tell Astley to stick 2 hammers ,chissels and scabby old fork lifts,i really hope you dont slap on another head and try to cover up Astleys fuk up just sayin😂😂
@saidhadziefendic872
@saidhadziefendic872 2 ай бұрын
WILL IT START,,, where's Marcus when you need him,,guest appearance 🤣🤣🤣
@landroverlandyman
@landroverlandyman 2 ай бұрын
John Astley for all your car repairs 😂😂😂😂😂😂😂😂😂😂 This video has to be aired as some sort of Joke surely he has limited knowledge of anything mechanical. ! !
@ShalomBrother
@ShalomBrother 2 ай бұрын
Cambelt snapped. There’s no load on it now turning it over
@AlexBC19
@AlexBC19 2 ай бұрын
Have I watched the same video 3 times over now? Its the Same video as the first one you put up 🤦‍♂️awful content
@louistorcello3525
@louistorcello3525 2 ай бұрын
It is a pity that they have not realised some people are not interested in this rebuild. A replica Cosworth. why not a 5-8-minute bit every video instead of filling their entire midweek video.
@AlexBC19
@AlexBC19 2 ай бұрын
@@louistorcello3525 struggling for content I’d say… all though people including myself just watch for the entertainment value and just seeing how the yard is going
@Billiampiper
@Billiampiper 2 ай бұрын
Yep agreed,it's not even content at this point
@SimonHarvey-i4z
@SimonHarvey-i4z 2 ай бұрын
​@@louistorcello3525They are trying to make the channel grow as ford's particularly cosworths are very popular but this is more like watching Stan and ollie 😂😂
@AlexBC19
@AlexBC19 2 ай бұрын
@@SimonHarvey-i4z that’s fine I get that… but what we’re seeing is not the content we all tune into week in week out
@sleepeasywithwhitenoise3860
@sleepeasywithwhitenoise3860 Ай бұрын
Swap for a transporter t5 with t5:1 front end conversion. 2.5tdi 170k 12mts mot 8seats
@GrahamWP58
@GrahamWP58 2 ай бұрын
Bodgit and scarper LOL keep going you'll get it running
@johnp6636
@johnp6636 2 ай бұрын
Timing is out doesn’t sound right when cranking and it’s backfiring through the throttle body
@backwheelaj7956
@backwheelaj7956 2 ай бұрын
More Sierra vids ASAP very uplifting series what a diamond
@growjunkieradio
@growjunkieradio 2 ай бұрын
GoodVibes
@BCB
@BCB 2 ай бұрын
Thanks!! :-)
@GazMoby
@GazMoby 2 ай бұрын
Gonna be honest i watch all the yard videos but I don't watch these.
@PeterWarren-z1k
@PeterWarren-z1k 2 ай бұрын
Boring like the last one about a car, the clue to your content is in the name Baxenden Car Breakers or start a new channel the other bloke
@littledavey2169
@littledavey2169 2 ай бұрын
Keep at boys you will get there 💯.🤙🦊
@philanderson7611
@philanderson7611 2 ай бұрын
Be worth while just doing a compression test after checking the timing.
@Vince-d5t
@Vince-d5t 2 ай бұрын
If she means that much to you pay a man not a monkey pay cheap pay twice ❤
@Stationaryenginevideos
@Stationaryenginevideos 2 ай бұрын
need a separate channel for this build
@c111prs
@c111prs 2 ай бұрын
All these people complaining,,,you can see the thumbnail and title, go watch something else if it’s not for you, simples
@Billiampiper
@Billiampiper 2 ай бұрын
Jog on dinlo
@Harrymcm
@Harrymcm 2 ай бұрын
Love ur videos mate 👌🏼
@c111prs
@c111prs 2 ай бұрын
@@Billiampiper if the contents not for you mate, it’s you that should jog on you melt, make sure you close the door after you
@Billiampiper
@Billiampiper 2 ай бұрын
@@c111prs content**
@ifixcars5631
@ifixcars5631 2 ай бұрын
james the timming has jumped mate its not going to start untill you sort the timming out and possibly need new valves because the bent when it cut out after it first started and stopped with it knocking
@peterfox6256
@peterfox6256 2 ай бұрын
Obviously don't read the comments , told them that last week
@Stinky-pinkys
@Stinky-pinkys 2 ай бұрын
They prob no mate these have been filmed before hand I guess
@DarrenFuchs-k1w
@DarrenFuchs-k1w 2 ай бұрын
@@peterfox6256 i did think the same thinking someone just goes tho them clicking like but not reading anything
@peterfox6256
@peterfox6256 2 ай бұрын
@@Stinky-pinkys yes probably filmed weeks ago
@briansweeney2291
@briansweeney2291 2 ай бұрын
Part 2 the START 😂
@Billiampiper
@Billiampiper 2 ай бұрын
Part 1 and 3 aswell
@bigdude8470
@bigdude8470 2 ай бұрын
I’m still saying that there’s no compression
@davidtaplin7990
@davidtaplin7990 2 ай бұрын
Sierra THIS IS BORING a bit like watching paint dry, 👀👀👀
@NicksGarageUk
@NicksGarageUk 2 ай бұрын
Your over complicating this engine,, you can turbo a standard inlet manifold with good results,, aluminum intake off a late xr2i or similar is better
@AliMackMechanical
@AliMackMechanical 2 ай бұрын
You can turbo a pinto 😂😂
@berniemcdevitt8093
@berniemcdevitt8093 2 ай бұрын
Boring
@robertmorris5214
@robertmorris5214 2 ай бұрын
Great video guy's really enjoying it
@andrewowen9682
@andrewowen9682 2 ай бұрын
Boring 😴...
@stevenprestwich521
@stevenprestwich521 2 ай бұрын
Sounds like low compression to me
@Itsmartinsworld
@Itsmartinsworld 2 ай бұрын
Get in the lads
@JGGZ1000
@JGGZ1000 2 ай бұрын
Seems to be a whole lot of guesswork, and maybe try this, maybe try that? And the Mic needs to be away from whatever’s making it flutter. Sorry. Just saying…..
@backwheelaj7956
@backwheelaj7956 2 ай бұрын
Stop crying and enjoy the content @JGGZ1000
@JGGZ1000
@JGGZ1000 2 ай бұрын
@@backwheelaj7956 Wasn’t crying, honest. Maybe just weeping a little……..😅
@RobSmith-b1s
@RobSmith-b1s 2 ай бұрын
Hovis
@benerst10
@benerst10 2 ай бұрын
Stick to breaking them haha
@c111prs
@c111prs 2 ай бұрын
They have broke it 😂
@jackiespencer5599
@jackiespencer5599 2 ай бұрын
👌
@Thermopylae2024
@Thermopylae2024 2 ай бұрын
Plug leads look wrong ? i know it was running but check firing order Heee 👍
Christmas shopping did we buy another car Baler
26:09
Baxenden Car Breakers
Рет қаралды 1,4 М.
We Finally Upgrade Our Car Dismantler!
32:13
Baxenden Car Breakers
Рет қаралды 15 М.
Ful Video ☝🏻☝🏻☝🏻
1:01
Arkeolog
Рет қаралды 14 МЛН
The Lost World: Living Room Edition
0:46
Daniel LaBelle
Рет қаралды 27 МЛН
SIERRA COSWORTH REPLICA FINAL EPISODE!
26:28
Baxenden Car Breakers
Рет қаралды 11 М.
Bigger Engine.
2:03:51
SimonFordman
Рет қаралды 319 М.
Baxenden Car Breakers & EveryTrade at WAR
38:13
EveryTrade
Рет қаралды 9 М.
Couldn't be fixed for 7 years I FIXED IT IN 30 SECONDS!
21:14
Italia Autos
Рет қаралды 135 М.
WE BOUGHT A SALVAGE CAR FOR LESS THAN £1k BUT WAS IT WORTH IT?
22:33
salvage rebuilds uk
Рет қаралды 124 М.
NIGHTMARE Delivery of NEW Scrap Handler Machine!
46:13
Baxenden Car Breakers
Рет қаралды 27 М.
The CHEAPEST BALER IN THE COUNTRY Gets a Makeover!
31:17
Baxenden Car Breakers
Рет қаралды 16 М.
1978 Triumph Spitfire sitting for years. Will it run?
1:39:57
Not Economically Viable
Рет қаралды 201 М.
Ful Video ☝🏻☝🏻☝🏻
1:01
Arkeolog
Рет қаралды 14 МЛН