Can we get a long neglected wheelin rig back out on the trails?

[@CPthetooladdict]

I honestly was gonna pull the trigger on that but I thought the guy's account was a spam account because it said Mc lovin lol. That was a smokin deal glad you ended up with it ron!

[@misfittoys8883]

@@CPthetooladdict I dont own it, but I do get to work on it!! How awesome is that?

[@CPthetooladdict]

​@misfittoys8883 well it was a great deal lol sounds like every day of my life! One of these days I'm going to buy a rig and come have some fun with you fellas I've been missing out for a long time I've never been wheeling just riding dirt bikes

[@CPthetooladdict]

​@@misfittoys8883that tank might not be baffled and that pickup is also could b3 something to inspect seems like it's definitely dropping Cylinders and starving for fuel I agree I think you are on to something with that.

[@misfittoys8883]

@@CPthetooladdict tank is definitely not baffled

[@misfittoys8883]

​@@CPthetooladdicthow do you feel about Ramchargers? Got a line on a cheap one for a revival

[@paulweigle6872]

Mad Max is at it again. Love the fabrication and pretty much all of the content you do. Thanks man. Much respect.

[@misfittoys8883]

@@paulweigle6872 thanks for the accolades (hope I used that word correctly)

[@jimschafer9196]

Bring it looking forward to all the awesome fabrication work to make this an updated wheeler - Thanks for the reveal and trouble shooting, great work.

[@misfittoys8883]

Collecting parts now for the upgrades. Hoping to have it ready by Labor day weekend but admittedly might not happen due to other obligations

[@donaldhalls2189]

Looked like a wheely great day, definitely worth the effort to get it running, thanks for sharing, all the best to you and your loved ones

[@misfittoys8883]

It was suprisingly capable despite its issues. Should be a beast after improvements, I believe

[@kennethsonier1766]

Good morning from Cape Cod ⛵ you got quite a bit of work done on the new rig, you certainly know your stuff Ron. It's always cool to see you and Aaron working together, I like how you screwed each other 😂 not Steve is pretty rude chewing as loud as he was 😂 it's always a fun time watching you guys Wheeling, seems that you figured out what the problems are on the new Rig, I figured you would. Thanks for sharing another awesome video ✌️🇺🇲

[@misfittoys8883]

Fuel issue was puzzling while we were out wheeling, but after getting home and giving it more thought, my theory is the only one that makes sense. We shall see.

[@bobk2111]

just dropping in to say, i really enjoy your vids man, thanks for the content!

[@misfittoys8883]

@@bobk2111 I appreciate your viewing and your comments.

[@Russworld1]

Another awesome video. Looking forward to the future ones. 👍👍

[@misfittoys8883]

I will keep making them if you keep watching them!

[@metalmangle]

Evolution, the Cadillac of Chop Saws. Also, just a kick ass job cleanin that old rig up. It grew on me by the end of the video. :D

[@misfittoys8883]

That Evolution chop saw is one of those kind of tools that stings to buy, but after you have used it a while, you will never go back to a regular chop saw! Cleaning all the useless crap off that rig made it look a LOT better in my eyes

[@4rd4x4truck]

Thanks for the video. I enjoyed it. Keep them coming.

[@misfittoys8883]

Will do, Chief!!

[@bobtucker8875]

Can't wait to see more, thanks for sharing. Very interes 1:45:43 ting 🧐 content for share. All that buggie needs is rear steer,an it will be fine. Thanks for sharing guys.

[@misfittoys8883]

@@bobtucker8875 putting rear steer on it just so it can drive up hills more effectively backwards seems like a lot of unneccesary work I LOVE IT!!

[@Helge198]

Would sure love to weel with u guys if I ever comes to us. U guys know to have a good time

[@misfittoys8883]

@@Helge198 just look for our numbers in the bathroom stalls!

[@BUILTFORDTOUGH79]

Kitty is no Steve, but I approve! That buggy is pretty sweet. EDIT: she’s rough. As somebody who welds quite a bit, and has done some “decent” wiring, that’s a rough’in. She’ll still go!

[@misfittoys8883]

@@BUILTFORDTOUGH79 despite its problems, it seems to be a pretty capable wheelin rig, just like it was in the past

[@2koolchris291]

I enjoy these videos

[@misfittoys8883]

@@2koolchris291 I will keep doing them if people keep watching

[@SS-kg2pe]

Busted out laughing with the Keychain ornament😂😂😂

[@j.j.clingman4083]

You should definitely get rid of that plastic line that is run for the oil pressure!!! I have seen several different vehicles that have ended up getting a little pin hole in the line and the owner did not realize it before it was too late!! I end up getting two different fittings one that will bolt to the gauge and one that goes into the block and then just get the Wright length of braided brake line with AN fitting on both ends so that the line will fit to both fittings!!! I have never had an issue with any of them that I have done this way!!!

[@misfittoys8883]

@@j.j.clingman4083 excellent point

[@mikerhodeback9636]

Looks like a lot of Ray Charles welding been takin place there...not sure about that cage. P.s.. they make something called kool jell you can weld or solder right next and it will keep things cool

[@misfittoys8883]

I have seen a LOT worse. Truth be told, I have DONE worse on a few occasions

[@gumbomudderx7503]

That’s a pretty cool rig. You should do a video some time of setting one up to run off LP. I don’t know anything about LP other than that’s what the Schwanns trucks run on lol

[@misfittoys8883]

@@gumbomudderx7503 Troy- guy in our group with the Ford cab truck, is REAL knowledgable on the propane, and propane accessories. I am currently collecting parts to build the M151 that I revived a year ago into a wheeling rig and I will be installing propane components on it.

[@gengische]

Just subscribed. Now instead of 17, you have 17 & a half

[@misfittoys8883]

@@gengische half? How does that work?

[@jessesoden9855]

Long live the Green Machine! And why didn't you replace the missing stud when your front hub was apart? LOL

[@misfittoys8883]

@@jessesoden9855 wasnt it enough I took the bad one out! No parts stores open at the time I was working on it. I will get it later when I tear that corner back apart to phase the axle u joints and put a repair sleeve on spindle seal area

[@shannondueling7697]

Spidey!!!

[@misfittoys8883]

@@shannondueling7697 welds whatever a spider can!! New welding mask is Antman

[@willscott85]

Hear me out, hand throttle. Is it a bad idea? Probably, but thats why it would be awesome

[@misfittoys8883]

@@willscott85 bad ideas often result in entertaining results

[@adamstorm9710]

1st comment! Needs a footprint gas pedal!

[@misfittoys8883]

@@adamstorm9710 I am going to have to get a case of them from China I guess!

[@shannondueling7697]

Overgaard or Menninga? I'm thinking Overgaard!

[@flummer1023]

Menninga

[@misfittoys8883]

@@shannondueling7697 correct, Menninga. I hit him up about it before the purchase was made and he warned me that "I didnt know $hit about $hit when I built that" (his words) I believe Overgaard still has his rig but havent seen him out wheeling in forever

[@shannondueling7697]

@@misfittoys8883 must of been before the Moonshiner, at least he was upfront about it lol!

[@shannondueling7697]

Labor day weekend! kzbin.info/www/bejne/mpyleIdneruUhLMsi=mrIRJDY2I5W6ovHA

[@stevenlatham4397]

It’s obvious you prefer Fords, but you don’t bash GM on camera constantly like most Ford guys. Do you like some GM components? You didn’t criticize the 350 at all, or the New Process transfer case.

[@BUILTFORDTOUGH79]

As a ford guy, I give credit where credit is due. I’m partial, for sure, but I love them all. It it makes compression and smokes, I’m on board!

[@misfittoys8883]

@@stevenlatham4397 I honestly have no problem with GM's. Cant deny that they seem to be pretty on the ball when it comes to their engines(most of them anyway) I know Chevy people that cant seem to ever stop talkin $hit about Ford and I know Ford people that are the same way about talkin trash about Chevy. I like to think I outgrew that crap a long time ago even though I will make a good natured joke occaionally.

[@SS-kg2pe]

Busted out laughing with the Keychain ornament😂😂😂

[@misfittoys8883]

@@SS-kg2pe thanks