Can You Really EDC A Microtech OTF?

[@SpecterSeventy2]

I’m a firefighter and EDC my single edge (with half serration’s) Ultratech on duty and off for the last four years and haven’t baby’d it the slightest through all of its everyday uses. Through this, I’ve needed to sharpened it about ten times to varying degrees (to keep it super sharp) and have also needed to clean it every few months (with a couple disassembly’s) to keep it very reliably functioning. I know you’re not supposed to disassemble for factory warranty reasons but double action Microtechs are actually brilliantly simple inside and very easy to take apart and reassemble in order to really clean the insides of their only real operational enemy…. pocket lint that can get deep inside the knife’s sliding surfaces and doesn’t always come out with Rem-oil and compressed air cleanings.

[@jkbear29]

Thanks for your input … I just bought a utx85 and was wondering about microtech and getting as much info as I can … I got my utx 85 on the way … now my question is how long were you able to use it before you had to sharpen it ? And do you send it in or do you sharpen it yourself for that ?

[@SpecterSeventy2]

@@jkbear29 I sharpen it myself and sorry but I don’t have a clear answer on how often I do. It can vary between a couple weeks or a couple months. That’s because it all depends on what I’m cutting, how much and how sharp I want to keep my knife.

[@trinajska]

I have been using microtech otf knifes for 8 years now,it has never failed on me,I only broken 2 blade tips on the double edge models but that was my fault,the blades are strong but not invincible,fantastic knifes I also use folding knives which are a little better for hard use but i have a soft spot fot otf’s

[@hvymtlkngedc9705]

They are amazing quality but the tip and edges are very thin, I always been a EDC Pry bar with me to avoid breaking the tips. I typically EDC Folders and use them hard, but i bought this specific microtech to beat and see how it would hold up vs a benchmade or spyderco folder. So far it's still going strong!. Thanks for the support!

[@jamalnetflix2198]

I work in autoglass and I edc both my Ultratech and combat Troodon cycling them out. Mostly cutting plastic wrap, boxes and string lines, nothing crazy. Feels better having one in sketchy parking lots, neighborhoods and parking garages as well. Love my microtechs, I super recommend

[@knifelyfe6565]

So you pretty much prefer the OTF for cutting cans? AfriCANS, MexiCANS and Puerto RiCANS?

[@sofakingphat8087]

I own several, and I’ve only had problems out of one that I purchased secondhand. Apparently the previous owner put some sort of oil in it. Maybe vegetable oil? It wasn’t a petroleum product however it took me a long time to take it apart and clean all that stuff out of it. After it was clean and I put some REM oil in it it’s been perfect. I believe that people who purchased OTF knives. Especially new owners that don’t have the dexterity and strength to open and close. It may try to use oil to fix that problem.

[@manstersr]

I carry one every day. I think they are the safest knife design for opening packages, baggies, cutting the hedges, etc. because you can retract the blade much easier than other designs if you can't put it back into your pocket. You mentioned the special driver for the screws, mine came with the driver. I probably bought a counterfeit by mistake.

[@zachz699]

That is why when I buy a knife over 100 dollars I dont even play with Amazon or anything else, only authorized dealers

[@75thteaster54]

Just what I was looking for!!

[@zachz699]

I have always wanted a microtech OTF, the new Gen 3 Combat troodon has torx screws which finally pushed me into buying one for my 30th birthday which is actually tomorrow. I am not buying a 500 dollar knife that has springs and mechanical stuff going on I cannot take apart and clean and trouble shoot lol. I have been carrying it about a week and I really like it so far, hopefully in a couple years I will have some cool war stories. Like my Spyderco military I carried for like 8 years, that beast got dropped off the 2nd floor of a parking garage by accident. The handle also pried open the mechanism on a ratchet strap that had a dudes hand caught really bad and it is still good to go, albeit maybe a little more off center than it was new.. ha. I LOVE that knife, hope to say to same from the troodon. I dont expect it to be quite as robust as the military due to the complexity but my standards aren't exactly low either

[@Daddy53751]

I’ve found that OTF (double action) is the absolute handiest knife to have for everyday stuff. Being able to get it out, open it, close it safely and get it back in your pocket one handed is the best, especially when you are using your other hand for something else.

[@comradesandwich9437]

Hell yeah dude, cheers for the video!

[@tonyochoa7097]

I wouldn't recomend for hard use,but for your usual edc tasks-absolutly,and for self defense, I wouldn't recomend ANY knife,however,if you're desperate, a quality otf will work as well as any,and there is something to be said,for the stealth and ease of deployment of an otf

[@AhnDhyYhu]

I EDC my UTX-70 S/E for cutting fruit, opening candy and snacks, and food preparation. I always carry it in my back pocket in case I need it if someone tries to kidnap me and tie me up with rope or zip ties. 😂

[@metalmansean6040]

i found breakfree CLP to work better then rem oil. I also noticed if you imagine you took 2 metal plates that were flat and put oil in between them. clp does not hydrolock the 2 plates and rem oil does.

[@N3wbMa5t3r]

I would absolutely recommend an Ultratech for EDC. Microtechs Service Personnel Program is great for LAW ENFORCEMENT, FIRE, EMS, MILITARY... You can get an Ultratech for a little over $200...

[@gerretoutdoors3710]

What is that wedge/pry bar edc thing in the thumbnail?

[@andythecableguy_3009]

Dude! People think I was a wierdo because I used the debit card sleeves when I was doing alot of trench work. Constantly rubbing the strip off of my cards from dirt and such

[@AD-yt8ik]

You don't need to buy their bit driver. Melt the end of a plastic pen and press it to the screw head and it will mold. Free tool. Won't strip the screw head either since the plastic will just deform if you over torque it.

[@GAMESTERVISION]

They are great for edc because many times when u need to cut open anything u need to do it fast with one hand on the thing ur cutting. To be able to open and close it fast with 1 hand only is safer and faster then having to use 2 hand to open or close it with a lock release. Plus they can never ever close on ur hand while in use.

[@garrettsarchet]

Microtech has recently came out with a new otf called the hera only in a dagger style so far. With a new pocket clip and goes for $425 on blade hq but they are sold out as of now.

[@hvymtlkngedc9705]

Yeah, I have seen it. Now that it's been a few weeks there are a few vendors that have them in stock. Seems to be a Halo style chassis with a dual Fuller's in the blade, It looks like a cool knife and all but that price point seems to be a little steep considering the only real potential upgrade i see on it is that pocket clip the the de-tent ball on the end. I like that they are coming out with new model's though rather than only focusing on themed variants of their production and signature series lines.

[@straighttothepoint3477]

Good video man, I love my Ultratech aswell!

[@hvymtlkngedc9705]

Amazing knives! Thanks for the support.

[@SiliconDrifter]

What’s your pry tool?

[@kevindreyer31]

I've carried my microtech EDC for years now. They are the best otf's you buy yo

[@hvymtlkngedc9705]

Hands down they really are, we have all seen the torture test videos but really putting them to the test out on job sites has blown me away!

[@DiegoMartinez-ou5wn]

I just recently got my first ultratech and bought another shortly after and love them. However I've been seeing alot about the guardian tactical recons and how their switch is much better and smoother than microtech. I just ordered one to see if it's true.

[@75thteaster54]

Would you recommend the tanto over the dagger for edc ?

[@hvymtlkngedc9705]

It really depends on what your tasks are day to day that you would use it for, I like having the option of a double edge for self defense and it’s great for opening packages/envelopes etc. But if you are looking for a beater knife that you can get down and dirty with single edge tanto offers a little more versatility and the ability to put a thumb on the spine for more control and force. I own 11 microtechs and they are all double edged but this one lol. But they typically are my weekend carry’s and this guy is strictly a work knife. Hope this helps!

[@75thteaster54]

@@hvymtlkngedc9705 I got one more question how about sharpening the d/e is it very difficult 😣 heard it was almost impossible to do it lit yourself so how do you sharpen ypur D/E

[@DV77737]

It’s what ever u like Ol Son

[@jimselfridge8530]

Last 10 years edc,dagger ultratech

[@doejon9424]

Microtech makes the best user OTFs (sorry Guardian Tactical & Hawk Knife Designs). The Ultratech is a great EDC but the UTX-85 is a epic EDC option too. I find myself reaching for my UTX just as much if not more than my Ultratechs. Also, the Microtech tanto is the best edge for utility AND self defense in my opinion. I have some double edge versions but they are just fall short for being a great EDC option. Curious if you have any of the bayonet grinds & how you like those ? Are those a true double edge or is the top a thin false edge?

[@hvymtlkngedc9705]

The Bayonet blade is on my wishlist for sure, I believe that half of the top portion of the blade has an edge and the other half is a thin blade spine. If i ever get the color combo i want i will do a review of that for sure!

[@doejon9424]

@@hvymtlkngedc9705 That's how I feel. I just haven't found the "right bayonet edge Ultratech" for me yet. In the meantime I'm perfectly happy with the tanto & standard edge. I really hope they bring back the spartan blade & some unique bayonet blades. I'd take a violent or hot pink spartan blade bahaha!

[@queefersutherland8495]

Guardian is just as good if not better for edc/user

[@doejon9424]

@@queefersutherland8495 I will say this about Guardian Tactical.. they have a MUCH better "user edge". Microtech's is very thin & after a couple sharpening sessions.. you *will have to* re-profile the entire blade because the edge so thin for such thick metal stock. Anyway, a year later & I carry my Guardian Tactical(s) more than my Microtechs.

[@queefersutherland8495]

@@doejon9424 I couldn't have said it better. Completely agree

[@KaPPy83]

You can EDC whatever you want.

[@hvymtlkngedc9705]

Yes you can, but some of us want to know how these hold up outside of an office job and how reliable they stay.

[@KaPPy83]

@@hvymtlkngedc9705 I bought my first Microtech Ultratech DE about a month ago. I've wanted one for years. It's been EDC pretty much everyday since then but I realize for "normal" day to day applications, probably not the best choice.

[@hvymtlkngedc9705]

@@KaPPy83 They hold up to hard use just fine and are very practical for a wide range of applications. I think the real key to keeping any OTF reliable with daily use is good maintenance. I wanted to test this one out as hard as i could so i never disassembled it. With my other microtechs i take them apart fully and clean them routinely. As long as nothing like a small rock or sand gets caught in between the chassis and the blade slide where it could damage the soft aluminum chassis, eliminating the smooth action of those parts moving back and forth against eachother they should be able to externally take a beating for years. I amsuper stoked that you did pick one up for yourself, they really are an amazing tool! The heretic line is also nice and very underrated!.

[@alexaveevelasquez6099]

Take the clip off bend it tight and you're good man

[@k9teamzagrebskolazapse149]

Mine when came has been so tuff 5 opening and my finger is broken, so I used ilitle WD 40 and from then it's incredible smooth. Not one misfire in 2 ares.

[@paulmartinez9908]

Good video by the way, new subscriber here

[@hvymtlkngedc9705]

Thank you! and Thank you for subscribing! Hopefully it was helpful.

[@robertfelts8773]

I got a used troodon. I want to love it. I didn't know about the oil trick and it was failing because of that. I just learned the oil trick a few weeks ago, and today the damn spring just broke. I hate that screw bs too, but it is what it is. I'm either going to be a life long customer or I'll never buy them again depending on what happens when I send it in. If it takes more than 50 bucks total or 30 days total then I'm over it and I'll never give them a dollar of my money again

[@RADKNIVES]

Is this just original grey? It looks alot darken then all the grey ones I've looked at lately.

[@thaknobodi]

Pro: as someone who likes to spar, jump around and also mountain bike, there's no chance an OTF can cut my leg open

[@nomadjedimaster7690]

Is my Utx 85 fake my blade says m390

[@bobmahnamahknob]

No model on the blade?

[@greebuh]

Is this a real question?

[@badmoon7549]

You Know... LOL.

[@nomadjedimaster7690]

😂🎉

[@Yamabrah_YZF]

If you warranty it three times you can lol

[@airsoftluke17]

It’s too smol

[@CaptDavesSportfishing]

WTF???? I CARRY MINE 365, 7 DAYS A WEEK! ELASTIC SCOUT CARRY ON BELT. EVEN ON THE BOAT IN SALTWATER CHARTER FISHING.

[@nenadcubric2663]

Is more a fun toy

[@Gist-zj4vf]

I sold mine. I hated it. Just wanted to let others know its not a everyday carry knife.

[@southpawsNfriends]

From cheap knock offs, to the highest quality, I've yet to own a single OTF knife that I would trust with my life.

[@doejon9424]

I think you would be a complete fool to trust your life with *any* 3.5 inch EDC blade. OTF, folder or fixed. Sounds like you just like to justify a reason not to carry an OTF. Which is very, very niave. Just flat out say, you refuse to buy a Microtech. Don't pretend that you ONLY carry an EDC knife that has capabilities of jungle survival. That's unrealistic. Your comment is comical. It's about every day carry, he's not claiming it's going to be the best camp / bushcraft / survival knife. Unless you're the type of tool who pulls out the ESEE 6 (or similar fixed large blade) for edc tasks..

[@southpawsNfriends]

@@doejon9424 You have issues. Lots of issues, good luck with that. Go troll someplace else idiot. See ya.

[@doejon9424]

@@southpawsNfriends It's not trolling at all. Your comment, in relevance to what he said about the Ultratech, was completely absurd. You sound like you only EDC a knife that a wilderness survival expert would carry in the jungle or desert. Every Day Carry is not generally something you carry to "trust your life" with. That's crazy talk. He never said a word about trusting his life with that knife if he had to pick 1 knife to do so.

[@semperparatus5942]

Anything is better than a stick, nance.

[@captainthruster9484]

You don't have a crawl suit? What's up with that? You can write down myself regularly having sand in my pockets I would definitely not go with this knife

[@razvanteleanu4302]

No. It's expensive, big and menacing (you can't use it in an office environment) and it's... overkill. A little swiss army knife will do the same job.

[@Caoimhin7-4]

Stupid question, do what you want.!