I'm glad, This description in this video give me the correct firmware. I used one from QMK and it's rekt-ed
@TheAsianNerd2 жыл бұрын
That's because this keyboard has different PCBs depending on where you buy it (apparently from what I've witnessed). If you are having the flex cut pcb as I do then the firmware should work
@bajafishtaco2 жыл бұрын
Where can i find the other versions bc 8 have a diffrent pcb mine has flex cuts and rgb its the v2 and I also have anouther mw65 pcb with no flex cuts but with rgb. Both boards keep disconnecting form my computer
@mhk56922 жыл бұрын
Hey, did the kit came with flex cut pcb or did you bought it externally?
@TheAsianNerd2 жыл бұрын
it's an option you can choose if you purchase it through Taobao
@amiruddinarif31942 жыл бұрын
Ive always wanted to buy this kit but unfortunately taobao dont have an english version which makes it hard for me to navigate myself around the website 😔
@ng1ra2 жыл бұрын
The base mw65 kit from taobao has stabilizer available yet?
@cengi2 жыл бұрын
could you please give a picture of how the board looks from the side? I'm afraid the keycaps are not low and make it look light floating key
@TheAsianNerd2 жыл бұрын
checkout the taobao link in the video description. There are tons of photos up there.
@SteezyMike2 жыл бұрын
Where to buy flex cut pcb for this board? Can you send link?
@wuggobuggo2 жыл бұрын
What do you think of the MW65 vs the KBD67 lite?
@TheAsianNerd2 жыл бұрын
I prefer the MW65, especially from typing softness stand point. MW65 has more flex which makes typing more comfortable, which is the main reason for getting a gasket mount keyboard.
@wuggobuggo2 жыл бұрын
@@TheAsianNerd TY!
@nguyenquocphong5492 жыл бұрын
do you add foam case?
@ayzmark032 жыл бұрын
Is this mac compatible?
@vaundy86462 жыл бұрын
Whered u get the POM plate?
@TheAsianNerd2 жыл бұрын
Taobao
@kodakeebs4982 жыл бұрын
I don’t understand how to import keymap? Now my keyboards keys aren’t working or in the wrong place.can u help?
@TheAsianNerd2 жыл бұрын
Open VIA -> Upper Left Corner "File" -> "Import Keymap" -> Select the .json file. But since this keyboard has different versions of PCB, my json maynot work with yours. If you are using the flex cut pcb then it should work fine.
@kodakeebs4982 жыл бұрын
@@TheAsianNerd i do not think i am
@kodakeebs4982 жыл бұрын
@@TheAsianNerd where can I download all the hex files?
@scrupulousxd96732 жыл бұрын
Yes, my mw65 can sound this good. It has alpacas and I penny/washer modded it and it thoccs too!
@TheAsianNerd2 жыл бұрын
neat
@slushie89592 жыл бұрын
Does it work with Mac since I have a Macbook
@hanhao12082 жыл бұрын
does it come with case foam?
@TheAsianNerd2 жыл бұрын
It doesn't come with case foam but you can purchase one together with the keyboard.
@mancha.lantay2 жыл бұрын
hi :) i'm having trouble locating the right firmware to download... any ideas?
@TheAsianNerd2 жыл бұрын
I've put the file link and a short tutorial at under the video description. Enjoy!
@mancha.lantay2 жыл бұрын
@@TheAsianNerd thank you! someone actually sent it to me late last night but i appreciate it anyway haha
@feedlord1232 жыл бұрын
can i ask how to switch between per key rgb and underglow
@TheAsianNerd2 жыл бұрын
There's no per key RGB for this PCB
@eamonlee1592 жыл бұрын
Mine has per key and underglow rgb
@TheAsianNerd2 жыл бұрын
@@eamonlee159 Because this keeb doesn't come with only 1 type of PCB. Mine is flex cut with no per key rgb
@cashionsteven56952 жыл бұрын
fn + f23 (key binding in VIA) =toggle RGB, fn + f24 = underglow, have fun ;))
@keitharputham75882 жыл бұрын
bro i am having problems with the key remaping its all over the place. for example when i press k it becomes d
@TheAsianNerd2 жыл бұрын
which PCB do you have? the flex cut or the RGB?
@keitharputham75882 жыл бұрын
It's ok I found out the problem already.. I had the RGB version
@robbycantero2 жыл бұрын
@@keitharputham7588 How did you fix this? I'm having the same problem.
@keitharputham75882 жыл бұрын
@@robbycantero can you give me your discord so I can send you the files needed to flash in
@keitharputham75882 жыл бұрын
@@robbycantero you just need to flash in a different drive
@ConfusedWalrus732 жыл бұрын
Hi, I'm having trouble flashing my keyboard, it keeps giving the output "Atmel DFU device disconnected (libusb0): ATmel Corp. ATmega32u4 (03EB:2FF4:0000)" which then remaps all my keys. Anyone had a similar experience?
@kodakeebs4982 жыл бұрын
Yea same here
@kodakeebs4982 жыл бұрын
Did u find a solution?
@ConfusedWalrus732 жыл бұрын
@@kodakeebs498 yes I managed to fix it by following this vid kzbin.info/www/bejne/ooLHnISpa7ySn80
@Kila4nia2 жыл бұрын
i need a US seller for this board, if anyone knows of one let me know, I dont want to deal with a middle man for Taobao, I just had a bad experience doing that in the past and I never got my products or money back
@TheAsianNerd2 жыл бұрын
Good luck to your hunt
@kodakeebs4982 жыл бұрын
Aliexpress sells it for 30 more dollars
@J-Pop2 жыл бұрын
umm no because i don't have one :(
@walasilbii2 жыл бұрын
maybe use a different background music
@TheAsianNerd2 жыл бұрын
Will do! Thanks for dropping by!
@nos1452 жыл бұрын
@@TheAsianNerd i liked ur music
@dexterlallo3972 жыл бұрын
Request access is kinda annoying, you should keep it open my guy but hey thanks for the review and VIA tutorial.
@TheAsianNerd2 жыл бұрын
Sorry not quite familiar with the sharing function in Google drive. Can you help me check if it's open for download now?
@dexterlallo3972 жыл бұрын
@@TheAsianNerd got you ill check it now
@dexterlallo3972 жыл бұрын
@@TheAsianNerd All good thank you might buy this in future but still thanks alot