Canam outlander and renegade (gen2) trailing arm bearing removal.

  Рет қаралды 2,675

Marco_xmr

Marco_xmr

Күн бұрын

This is a simple and detailed video on how to remove the bearings on a gen 2 outlander and renegade trailing arms.

Пікірлер: 26
@kevinkowalkowskiii1262
@kevinkowalkowskiii1262 Ай бұрын
Thanks for the video! I am currently in the middle of installing some S3 stretched a-arms and trailing arms and when I got to the trailing arms I was a little unsure of how to get those out and I was stoaked that I found your video! Thanks again!! 🤘
@Marco_xmr
@Marco_xmr Ай бұрын
Awesome. Hope it helps. If you need farther help with things you can contact me on ig marco_xmr.
@storminpe
@storminpe 3 ай бұрын
Thanks for that! Now to find a video that shows how they pressed the new bearings in. :)
@BobLee314
@BobLee314 2 ай бұрын
Great easy way do it !
@sjsj5608
@sjsj5608 3 ай бұрын
Thanks ole boy u have no clue how much your video help me with this process. Update.. when tryin to install swing arms the outter cap keeps falling out, i took the cap flipped it inside out and put the seal over it to hold it in.. hope this may save someone headaches. Also its only 2 flat washers. 1 on each swing arm on the outside before the nut. Extremely hard to put back in either way, alot of pryin and banging. Anyone have any better ideas?
@scottwiater2699
@scottwiater2699 Жыл бұрын
You're brave, 1 slip and you break your knuckle.
@hvguy
@hvguy 8 ай бұрын
I'm doing mine rn and smashed my hand. You'd be surprised how strong real hands are 😹
@fazilous1
@fazilous1 8 ай бұрын
Why did you replace the bearings? Is it since they had play movement like mine?
@Marco_xmr
@Marco_xmr 8 ай бұрын
I had to pull the trailing arms off to change out a seal to the rear side of the gear box so since it was pulled I just went ahead and changed put the bearing so I wouldn’t have to pull them again anytime soon.
@rglenn42
@rglenn42 8 ай бұрын
How did you get the swaybar bolt out? Mine is hard to get out
@hvguy
@hvguy 8 ай бұрын
I hit mine out with a smaller bar. Then pulled the bar out.
@alainst-pierre9881
@alainst-pierre9881 Жыл бұрын
😎👊🍻
@450outtygang
@450outtygang 5 ай бұрын
what kind are they!!!????? where did you get them from i can’t find any for mine
@450outtygang
@450outtygang 5 ай бұрын
i have a 450 outlander and can’t find any and i need them
@Marco_xmr
@Marco_xmr 5 ай бұрын
Check in Partzilla.com.
@450outtygang
@450outtygang 5 ай бұрын
@@Marco_xmr i can’t find them can you send link
@Marco_xmr
@Marco_xmr 5 ай бұрын
Message me on ig. Marco_xmr
@450outtygang
@450outtygang 5 ай бұрын
@@Marco_xmr i don’t have ig if i only have messsges parents will not let me have it
Can-Am Outlander Rear Diff rebuild
56:13
Four wheeler Doctor
Рет қаралды 15 М.
Diagnosing Drive Shaft Vibrations
9:15
Tom Wood's Custom Drive Shafts
Рет қаралды 97 М.
Throwing Swords From My Blue Cybertruck
00:32
Mini Katana
Рет қаралды 11 МЛН
English or Spanish 🤣
00:16
GL Show
Рет қаралды 16 МЛН
Matching Picture Challenge with Alfredo Larin's family! 👍
00:37
BigSchool
Рет қаралды 53 МЛН
How to Replace Swing Arm Bearings 2008 Can-Am Outlander
8:39
Schnebs Garage
Рет қаралды 10 М.
Is Your Car or Truck Wheel Hub Stuck? Tips on Getting it Loose!
10:11
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 1,5 МЛН
RideTech Bushing Installation & Removal Tool
4:59
ridetechtv
Рет қаралды 1,1 МЛН
How to Remove Can am Renegade Outlander Trailing Arm G1 Gen 1
10:02
Cheyenne Bullard
Рет қаралды 10 М.
Can Am Outlander Rear driveshaft u-joint replacement
20:44
Scooter's Garage
Рет қаралды 8 М.
Throwing Swords From My Blue Cybertruck
00:32
Mini Katana
Рет қаралды 11 МЛН